Establishment profile
S & H INDUSTRIES
5200 RICHMOND ROAD, BEDFORD HEIGHTS, OH, 44146
EIN 341743660
Summary
S & H INDUSTRIES has accumulated 44 OSHA violations across 4 inspections over 45 years of recorded history, with $8,325 in total assessed penalties.
The establishment sits in the 99th percentile for violations within its industry-state peer group of 85,428 employers. Inspection frequency runs at the 94th percentile. The most recent enforcement activity was recorded 32 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
S & H INDUSTRIES appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
75% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 25 citations in this view · $8,325 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0217 B04 I | 2 | 2 | $200 | Mar 1981 | Jan 1994 |
| 29 CFR 1910.0217 C01 I | 2 | 2 | — | Mar 1981 | Jan 1994 |
| 29 CFR 1904.0002 A | 2 | 2 | — | Mar 1981 | Dec 1993 |
| 29 CFR 1910.0107 G02 | 2 | 2 | — | Mar 1981 | Dec 1993 |
| 29 CFR 1910.0309 A 040003 | 2 | 1 | — | Mar 1981 | Mar 1981 |
| 29 CFR 1910.0217 B03 I | 1 | 1 | $1,250 | Jan 1994 | Jan 1994 |
| 29 CFR 1910.0215 A04 | 1 | 1 | $1,000 | Jan 1994 | Jan 1994 |
| 29 CFR 1910.0219 D01 | 1 | 1 | $875 | Jan 1994 | Jan 1994 |
| 29 CFR 1910.0303 G02 I | 1 | 1 | $625 | Jan 1994 | Jan 1994 |
| 29 CFR 1910.0022 A01 | 1 | 1 | $500 | Jan 1994 | Jan 1994 |
| 29 CFR 1910.0023 C01 | 1 | 1 | $500 | Jan 1994 | Jan 1994 |
| 29 CFR 1910.0107 C05 | 1 | 1 | $500 | Jan 1994 | Jan 1994 |
| 29 CFR 1910.0147 C04 I | 1 | 1 | $500 | Jan 1994 | Jan 1994 |
| 29 CFR 1910.0107 B09 | 1 | 1 | $500 | Dec 1993 | Dec 1993 |
| 29 CFR 1910.0106 E02 IIB2 | 1 | 1 | $500 | Dec 1993 | Dec 1993 |
| 29 CFR 1910.0107 D07 I | 1 | 1 | $500 | Dec 1993 | Dec 1993 |
| 29 CFR 1910.1200 E01 | 1 | 1 | $500 | Dec 1993 | Dec 1993 |
| 29 CFR 1910.0157 E02 | 1 | 1 | $375 | Dec 1993 | Dec 1993 |
| 29 CFR 1910.0305 B01 | 1 | 1 | — | Jan 1994 | Jan 1994 |
| 29 CFR 1910.0304 A02 | 1 | 1 | — | Jan 1994 | Jan 1994 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer. Peer group: 85,428 employers. This establishment has 44 OSHA violations; peer median is 2.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 25 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for S & H INDUSTRIES. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 32+ years. Most recent activity: 32 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for S & H INDUSTRIES. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for S & H INDUSTRIES. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for S & H INDUSTRIES. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for S & H INDUSTRIES. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for S & H INDUSTRIES. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
S & H INDUSTRIES INC 5200 RICHMOND RD · BEDFORD HEIGHTS, OH, 44146 | RCRA | No Violation Identified | 0 | 0 | — | May 2010 | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for S & H INDUSTRIES. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
Consolidated across all USAspending recipient entities under this corporate parent — not attributable to this single location.
- General Services AdministrationHAMMER, HAND, (BODY AND FENDER): HAMMER, HAND HA NDLE LENGTH: 12.000 IN. HEAD LENGTH: 6.000 IN. H EAcontract · Last action 2009-02-16$1,464
- General Services AdministrationHAMMER, HAND, (BODY AND FENDER): HAMMER, HAND HA NDLE LENGTH: 12.000 IN. HEAD LENGTH: 6.000 IN. H EAcontract · Last action 2008-05-23$271
- General Services AdministrationHAMMER, HAND, (BODY AND FENDER): HAMMER, HAND HA NDLE LENGTH: 12.000 IN. HEAD LENGTH: 6.000 IN. H EAD WEIGHT: 12.500 HAMMER, HAND; BODYWORKER' S OF FSET SQUARE FACE AND CROSS PEEN. SHALL HAVE ONE OFFSET SQUARE AND ONE CROSS-PEEN FACE. THE OFFSE T SQUARE FACE SHALL BE FLAT OR SLIGHTLY CONVEX W HILE THE CROSS-PEEN FACE SHALL BE CONVEX. THE FA CES SHALL HAVE A POLISHED FINISH. (PARTIAL DESCR IPTION) EXPEDITEcontract · Last action 2009-12-07$244
- General Services AdministrationHAMMER, HAND, (BODY AND FENDER): HAMMER, HAND HA NDLE LENGTH: 12.000 IN. HEAD LENGTH: 6.000 IN. H EAcontract · Last action 2008-12-18$136
- General Services AdministrationHAMMER, HAND, (BODY AND FENDER): HAMMER, HAND HA NDLE LENGTH: 12.000 IN. HEAD LENGTH: 6.000 IN. H EAcontract · Last action 2008-11-18$136
- General Services AdministrationHAMMER, HAND, (BODY AND FENDER): HAMMER, HAND HA NDLE LENGTH: 12.000 IN. HEAD LENGTH: 6.000 IN. H EAcontract · Last action 2008-10-15$136
- General Services AdministrationHAMMER, HAND, (BODY AND FENDER): HAMMER, HAND HA NDLE LENGTH: 12.000 IN. HEAD LENGTH: 6.000 IN. H EAcontract · Last action 2008-07-28$136
- General Services AdministrationHAMMER, HAND, (BODY AND FENDER): HAMMER, HAND HA NDLE LENGTH: 12.000 IN. HEAD LENGTH: 6.000 IN. H EAcontract · Last action 2008-05-23$136
- General Services AdministrationHAMMER, HAND, (BODY AND FENDER): HAMMER, HAND HA NDLE LENGTH: 12.000 IN. HEAD LENGTH: 6.000 IN. H EAcontract · Last action 2008-03-27$136
- General Services AdministrationHAMMER, HAND, (BODY AND FENDER): HAMMER, HAND HA NDLE LENGTH: 12.000 IN. HEAD LENGTH: 6.000 IN. H EAcontract · Last action 2008-05-23$134
- General Services AdministrationHAMMER, HAND, (BODY AND FENDER): HAMMER, HAND HA NDLE LENGTH: 12.000 IN. HEAD LENGTH: 6.000 IN. H EAD WEIGHT: 12.500 HAMMER, HAND; BODYWORKER' S OF FSET SQUARE FACE AND CROSS PEEN. SHALL HAVE ONE OFFSET SQUARE AND ONE CROSS-PEEN FACE. THE OFFSE T SQUARE FACE SHALL BE FLAT OR SLIGHTLY CONVEX W HILE THE CROSS-PEEN FACE SHALL BE CONVEX. THE FA CES SHALL HAVE A POLISHED FINISH. (PARTIAL DESCR IPTION) EXPEDITEcontract · Last action 2009-12-07$122
- General Services AdministrationHAMMER, HAND, (BODY AND FENDER): HAMMER, HAND HA NDLE LENGTH: 12.000 IN. HEAD LENGTH: 6.000 IN. H EAD WEIGHT: 12.500 HAMMER, HAND; BODYWORKER' S OF FSET SQUARE FACE AND CROSS PEEN. SHALL HAVE ONE OFFSET SQUARE AND ONE CROSS-PEEN FACE. THE OFFSE T SQUARE FACE SHALL BE FLAT OR SLIGHTLY CONVEX W HILE THE CROSS-PEEN FACE SHALL BE CONVEX. THE FA CES SHALL HAVE A POLISHED FINISH. (PARTIAL DESCR IPTION) EXPEDITEcontract · Last action 2009-09-11$122
- General Services AdministrationHAMMER, HAND, (BODY AND FENDER): HAMMER, HAND HA NDLE LENGTH: 12.000 IN. HEAD LENGTH: 6.000 IN. H EAD WEIGHT: 12.500 HAMMER, HAND; BODYWORKER' S OF FSET SQUARE FACE AND CROSS PEEN. SHALL HAVE ONE OFFSET SQUARE AND ONE CROSS-PEEN FACE. THE OFFSE T SQUARE FACE SHALL BE FLAT OR SLIGHTLY CONVEX W HILE THE CROSS-PEEN FACE SHALL BE CONVEX. THE FA CES SHALL HAVE A POLISHED FINISH. (PARTIAL DESCR IPTION) EXPEDITEcontract · Last action 2009-09-11$122
- General Services AdministrationHAMMER, HAND, (BODY AND FENDER): HAMMER, HAND HA NDLE LENGTH: 12.000 IN. HEAD LENGTH: 6.000 IN. H EAD WEIGHT: 12.500 HAMMER, HAND; BODYWORKER' S OF FSET SQUARE FACE AND CROSS PEEN. SHALL HAVE ONE OFFSET SQUARE AND ONE CROSS-PEEN FACE. THE OFFSE T SQUARE FACE SHALL BE FLAT OR SLIGHTLY CONVEX W HILE THE CROSS-PEEN FACE SHALL BE CONVEX. THE FA CES SHALL HAVE A POLISHED FINISH. (PARTIAL DESCR IPTION) EXPEDITEcontract · Last action 2009-09-11$122
- General Services AdministrationHAMMER, HAND, (BODY AND FENDER): HAMMER, HAND HA NDLE LENGTH: 12.000 IN. HEAD LENGTH: 6.000 IN. H EAD WEIGHT: 12.500 HAMMER, HAND; BODYWORKER' S OF FSET SQUARE FACE AND CROSS PEEN. SHALL HAVE ONE OFFSET SQUARE AND ONE CROSS-PEEN FACE. THE OFFSE T SQUARE FACE SHALL BE FLAT OR SLIGHTLY CONVEX W HILE THE CROSS-PEEN FACE SHALL BE CONVEX. THE FA CES SHALL HAVE A POLISHED FINISH. (PARTIAL DESCR IPTION) EXPEDITEcontract · Last action 2009-08-24$122
- General Services AdministrationHAMMER, HAND, (BODY AND FENDER): HAMMER, HAND HA NDLE LENGTH: 12.000 IN. HEAD LENGTH: 6.000 IN. H EAcontract · Last action 2008-12-18$68
- General Services AdministrationHAMMER, HAND, (BODY AND FENDER): HAMMER, HAND HA NDLE LENGTH: 12.000 IN. HEAD LENGTH: 6.000 IN. H EAcontract · Last action 2008-10-15$68
- General Services AdministrationHAMMER, HAND, (BODY AND FENDER): HAMMER, HAND HA NDLE LENGTH: 12.000 IN. HEAD LENGTH: 6.000 IN. H EAcontract · Last action 2008-10-15$68
- General Services AdministrationHAMMER, HAND, (BODY AND FENDER): HAMMER, HAND HA NDLE LENGTH: 12.000 IN. HEAD LENGTH: 6.000 IN. H EAcontract · Last action 2008-10-15$68
- General Services AdministrationHAMMER, HAND, (BODY AND FENDER): HAMMER, HAND HA NDLE LENGTH: 12.000 IN. HEAD LENGTH: 6.000 IN. H EAcontract · Last action 2008-08-21$68
- General Services AdministrationHAMMER, HAND, (BODY AND FENDER): HAMMER, HAND HA NDLE LENGTH: 12.000 IN. HEAD LENGTH: 6.000 IN. H EAcontract · Last action 2008-08-21$68
- General Services AdministrationHAMMER, HAND, (BODY AND FENDER): HAMMER, HAND HA NDLE LENGTH: 12.000 IN. HEAD LENGTH: 6.000 IN. H EAcontract · Last action 2008-08-21$68
- General Services AdministrationHAMMER, HAND, (BODY AND FENDER): HAMMER, HAND HA NDLE LENGTH: 12.000 IN. HEAD LENGTH: 6.000 IN. H EAcontract · Last action 2008-07-28$68
- General Services AdministrationHAMMER, HAND, (BODY AND FENDER): HAMMER, HAND HA NDLE LENGTH: 12.000 IN. HEAD LENGTH: 6.000 IN. H EAD WEIGHT: 12.500 HAMMER, HAND; BODYWORKER' S OF FSET SQUARE FACE AND CROSS PEEN. SHALL HAVE ONE OFFSET SQUARE AND ONE CROSS-PEEN FACE. THE OFFSE T SQUARE FACE SHALL BE FLAT OR SLIGHTLY CONVEX W HILE THE CROSS-PEEN FACE SHALL BE CONVEX. THE FA CES SHALL HAVE A POLISHED FINISH. (PARTIAL DESCR IPTION) EXPEDITEcontract · Last action 2009-09-11$61
- General Services AdministrationHAMMER, HAND, (BODY AND FENDER): HAMMER, HAND HA NDLE LENGTH: 12.000 IN. HEAD LENGTH: 6.000 IN. H EAD WEIGHT: 12.500 HAMMER, HAND; BODYWORKER' S OF FSET SQUARE FACE AND CROSS PEEN. SHALL HAVE ONE OFFSET SQUARE AND ONE CROSS-PEEN FACE. THE OFFSE T SQUARE FACE SHALL BE FLAT OR SLIGHTLY CONVEX W HILE THE CROSS-PEEN FACE SHALL BE CONVEX. THE FA CES SHALL HAVE A POLISHED FINISH. (PARTIAL DESCR IPTION) EXPEDITEcontract · Last action 2009-09-11$61
- General Services AdministrationHAMMER, HAND, (BODY AND FENDER): HAMMER, HAND HA NDLE LENGTH: 12.000 IN. HEAD LENGTH: 6.000 IN. H EAD WEIGHT: 12.500 HAMMER, HAND; BODYWORKER' S OF FSET SQUARE FACE AND CROSS PEEN. SHALL HAVE ONE OFFSET SQUARE AND ONE CROSS-PEEN FACE. THE OFFSE T SQUARE FACE SHALL BE FLAT OR SLIGHTLY CONVEX W HILE THE CROSS-PEEN FACE SHALL BE CONVEX. THE FA CES SHALL HAVE A POLISHED FINISH. (PARTIAL DESCR IPTION) EXPEDITEcontract · Last action 2009-09-11$61
- General Services AdministrationHAMMER, HAND, (BODY AND FENDER): HAMMER, HAND HA NDLE LENGTH: 12.000 IN. HEAD LENGTH: 6.000 IN. H EAD WEIGHT: 12.500 HAMMER, HAND; BODYWORKER' S OF FSET SQUARE FACE AND CROSS PEEN. SHALL HAVE ONE OFFSET SQUARE AND ONE CROSS-PEEN FACE. THE OFFSE T SQUARE FACE SHALL BE FLAT OR SLIGHTLY CONVEX W HILE THE CROSS-PEEN FACE SHALL BE CONVEX. THE FA CES SHALL HAVE A POLISHED FINISH. (PARTIAL DESCR IPTION) EXPEDITEcontract · Last action 2009-07-27$61
- General Services AdministrationHAMMER, HAND, (BODY AND FENDER): HAMMER, HAND HA NDLE LENGTH: 12.000 IN. HEAD LENGTH: 6.000 IN. H EAD WEIGHT: 12.500 HAMMER, HAND; BODYWORKER' S OF FSET SQUARE FACE AND CROSS PEEN. SHALL HAVE ONE OFFSET SQUARE AND ONE CROSS-PEEN FACE. THE OFFSE T SQUARE FACE SHALL BE FLAT OR SLIGHTLY CONVEX W HILE THE CROSS-PEEN FACE SHALL BE CONVEX. THE FA CES SHALL HAVE A POLISHED FINISH. (PARTIAL DESCR IPTION) EXPEDITEcontract · Last action 2009-07-27$61
- General Services AdministrationHAMMER, HAND, (BODY AND FENDER): HAMMER, HAND HA NDLE LENGTH: 12.000 IN. HEAD LENGTH: 6.000 IN. H EAD WEIGHT: 12.500 HAMMER, HAND; BODYWORKER' S OF FSET SQUARE FACE AND CROSS PEEN. SHALL HAVE ONE OFFSET SQUARE AND ONE CROSS-PEEN FACE. THE OFFSE T SQUARE FACE SHALL BE FLAT OR SLIGHTLY CONVEX W HILE THE CROSS-PEEN FACE SHALL BE CONVEX. THE FA CES SHALL HAVE A POLISHED FINISH. (PARTIAL DESCR IPTION) EXPEDITEcontract · Last action 2009-07-13$61
- General Services AdministrationHAMMER, HAND, (BODY AND FENDER): HAMMER, HAND HA NDLE LENGTH: 12.000 IN. HEAD LENGTH: 6.000 IN. H EAcontract · Last action 2009-04-16$61
Federal contract dollars to this establishment. Primary NAICS: 332212 - HAND AND EDGE TOOL MANUFACTURING. Last action: 2009-12-07. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 1993-12-07 | Complaint | 23 | 12 | $5,750 | |
| 1993-12-07 | Complaint | 11 | 9 | $2,375 | |
| 1983-09-29 | Planned | 0 | — | $0 | |
| 1981-03-03 | Planned | 10 | 2 | $200 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Related searches
- Employers in OHState-wide enforcement data
About this data
This profile aggregates federal enforcement records on S & H INDUSTRIES from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is S & H INDUSTRIES's OSHA violation history?
- S & H INDUSTRIES has 4 OSHA inspections on record with 44 violations and $8,325 in total penalties.