Skip to main content

Establishment profile

S & B MACHINE COMPANY, INC

820 BLACKBURNE DRIVE, MOBILE, AL, 36608
332312Fabricated Structural Metal Manufacturing
EIN 630878508

Download as PDF →

OSHA inspections
7
over 31 years
Violations
21
$6,256 in penalties
Penalties
$6,256
$298 avg
Accident investigations on record
6 National Emphasis Program inspections · 1 OSHA follow-up

Summary

S & B MACHINE COMPANY, INC has accumulated 21 OSHA violations across 7 inspections over 31 years of recorded history, with $6,256 in total assessed penalties.

The establishment sits in the 84th percentile for violations within its industry-state peer group of 304 employers. Inspection frequency runs at the 90th percentile. The most recent enforcement activity was recorded 3 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

S & B MACHINE COMPANY, INC appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls.

OSHA workplace safety

Inspections
7
0.2 / yr · last 31 yrs
Violations
21
0.7 / yr
Penalties
$6,256
$298 avg / violation
67% serious33% other
Inspection trigger · planned
5 of 7
Inspection trigger · complaint
1 of 7

43% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 20 citations in this view · $6,256 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0179 B0311$1,020Jun 2012Jun 2012
29 CFR 1910.0217 C01 I11$900Jan 2003Jan 2003
29 CFR 1910.0178 L01 I11$867Jun 2012Jun 2012
29 CFR 1910.0305 B01 II11$867Jun 2012Jun 2012
29 CFR 1910.0023 C0111$686Jun 2012Jun 2012
29 CFR 1910.0147 C04 I11$630Jan 2003Jan 2003
29 CFR 1910.0253 B02 II11$526Jun 2012Jun 2012
29 CFR 1910.0147 C04 II11$400Jun 2003Jun 2003
29 CFR 1910.0147 C06 I11$360Jan 2003Jan 2003
29 CFR 1910.1200 F05 II11Jun 2012Jun 2012
29 CFR 1910.0178 L04 III11Jun 2012Jun 2012
29 CFR 1910.0179 B0611Jun 2012Jun 2012
29 CFR 1910.0179 J0311Jun 2012Jun 2012
29 CFR 1910.1200 F05 I11Jun 2012Jun 2012
29 CFR 1904.0032 B0611Jun 2012Jun 2012
29 CFR 1910.0217 G11Jan 2003Jan 2003
29 CFR 1910.0217 C03 VIIIC11Jan 2003Jan 2003
29 CFR 1904.004411Jan 2003Jan 2003
29 CFR 1910.1200 E01 I11Jan 2003Jan 2003
29 CFR 1910.0217 C03 VIIID11Jan 2003Jan 2003

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

84th

Worse on violations than most other employers in NAICS 3323 within AL. Peer group: 304 employers. This establishment has 21 OSHA violations; peer median is 5.

Fewer violationsMore violations
Penalty percentile
57th
peer median: $4,628
Inspection frequency
90th
peer median: 2

Safety self-report (OSHA 300A)

Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.

DART rate
0.0
vs industry
−1.8
TRIR
0.0
vs industry
−3.4

Reported for 22 average annual employees at this establishment.

Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.

Industry benchmark

Industry avg TRIR
3.4
BLS SOII 2024
Industry avg DART
1.8
BLS SOII 2024
Self-reported TRIR
0.0
OSHA ITA Form 300A (employer self-reported)

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
5
Complaint
1
Follow-up
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for S & B MACHINE COMPANY, INC. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
3 years ago

No federal enforcement activity has been recorded against this establishment in 3+ years. Most recent activity: 3 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for S & B MACHINE COMPANY, INC. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for S & B MACHINE COMPANY, INC. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for S & B MACHINE COMPANY, INC. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for S & B MACHINE COMPANY, INC. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for S & B MACHINE COMPANY, INC. Verify directly with Environmental Protection Agency

Motor carrier safety (FMCSA)

DOT number
1124832
Operation
A

Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.

Inspection history

DateTriggerViolationsSeriousPenalty
2022-11-29Planned0$0
2021-10-08Planned0$0
2017-04-14Planned0$0
2012-03-28Planned118$3,966
2003-06-25Follow-up11$400
2002-11-05Planned95$1,890
1994-12-07Complaint0$0

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in fabricated structural metal manufacturing within AL, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on S & B MACHINE COMPANY, INC from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is S & B MACHINE COMPANY, INC's OSHA violation history?
S & B MACHINE COMPANY, INC has 7 OSHA inspections on record with 21 violations and $6,256 in total penalties.
How does S & B MACHINE COMPANY, INC's safety record compare to its industry?
S & B MACHINE COMPANY, INC operates in the fabricated structural metal manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.4. S & B MACHINE COMPANY, INC's self-reported DART rate is 0 compared to an industry average of 1.8.