Skip to main content

Establishment profile

RITE ENGINEERING MANUFACTURING INC.

9441 WASHBURN ROAD, DOWNEY, CA, 90242
332710Machine Shops

Download as PDF →

OSHA inspections
2
over 24 years
Violations
18
$20,440 in penalties
Penalties
$20,440
$1,136 avg
Accident investigations on record
1 hospitalizations

Summary

RITE ENGINEERING MANUFACTURING INC. has accumulated 18 OSHA violations across 2 inspections over 24 years of recorded history, with $20,440 in total assessed penalties.

The establishment sits in the 97th percentile for violations within its industry-state peer group of 388 employers. Inspection frequency runs at the 73rd percentile. The most recent enforcement activity was recorded 21 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

RITE ENGINEERING MANUFACTURING INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
2
0.1 / yr · last 24 yrs
Violations
18
0.8 / yr
Penalties
$20,440
$1,136 avg / violation
17% serious83% other
Inspection trigger · complaint
1 of 2
Inspection trigger · accident
1 of 2

100% of inspections at this establishment produced violations,

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 18 distinct standards shown · 18 citations in this view · $20,440 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
4187 A11$14,400Feb 2002Feb 2002
4207 A11$2,475Feb 2002Feb 2002
4070 A11$410Feb 2002Feb 2002
5449 E11$410Feb 2002Feb 2002
3578 G11$410Feb 2002Feb 2002
4184 B11$410Feb 2002Feb 2002
4208 A11$245Feb 2002Feb 2002
3583 D11$245Feb 2002Feb 2002
3995 A11$245Feb 2002Feb 2002
5453 C11$135Feb 2002Feb 2002
29 CFR 2340.002311$135Feb 2002Feb 2002
29 CFR 2500.0008 A11$135Feb 2002Feb 2002
3203 A11$135Feb 2002Feb 2002
5144 E0111$135Feb 2002Feb 2002
5144 F0111$135Feb 2002Feb 2002
5446 H11$135Feb 2002Feb 2002
29 CFR 2340.0016 B11$135Feb 2002Feb 2002
328011$110Dec 2005Dec 2005

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

97th

Worse on violations than nearly every other employer in NAICS 3327 within CA. Peer group: 388 employers. This establishment has 18 OSHA violations; peer median is 4.

Fewer violationsMore violations
Penalty percentile
91st
peer median: $2,268
Inspection frequency
73rd
peer median: 1

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for RITE ENGINEERING MANUFACTURING INC.. Verify directly with OSHA Injury Tracking Application

Industry benchmark

Industry avg TRIR
2.7
BLS SOII 2024
Industry avg DART
1.5
BLS SOII 2024
Self-reported TRIR
Not in OSHA ITA

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Complaint
1
Accident
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for RITE ENGINEERING MANUFACTURING INC.. Verify directly with Occupational Safety and Health Administration

OSHA accident events

Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.

DateEventInjuriesHospitalizedFatalities
Oct 5, 2001AMPUTATED,SHEET METAL,ROLLER--CONST EQUIP,FINGER,MACHINIST,UNGUARDED11

Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
21 years ago

No federal enforcement activity has been recorded against this establishment in 21+ years. Most recent activity: 21 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for RITE ENGINEERING MANUFACTURING INC.. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for RITE ENGINEERING MANUFACTURING INC.. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for RITE ENGINEERING MANUFACTURING INC.. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for RITE ENGINEERING MANUFACTURING INC.. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for RITE ENGINEERING MANUFACTURING INC.. Verify directly with Environmental Protection Agency

Inspection history

DateTriggerViolationsSeriousPenalty
2005-06-27Complaint1$110
2001-10-19Accident173$20,330

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in machine shops within CA, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on RITE ENGINEERING MANUFACTURING INC. from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is RITE ENGINEERING MANUFACTURING INC.'s OSHA violation history?
RITE ENGINEERING MANUFACTURING INC. has 2 OSHA inspections on record with 18 violations and $20,440 in total penalties.
How does RITE ENGINEERING MANUFACTURING INC.'s safety record compare to its industry?
RITE ENGINEERING MANUFACTURING INC. operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7.