Establishment profile
REX HEAT TREAT - LANSDALE, INC.
951 WEST 8TH STREET, LANSDALE, PA, 19446
Operated by Rexmet Corporation
332811 — Metal Heat Treating
EIN 232113181
Summary
REX HEAT TREAT - LANSDALE, INC. has accumulated 33 OSHA violations across 4 inspections over 27 years of recorded history, with $45,244 in total assessed penalties.
The establishment sits in the 92nd percentile for violations within its industry-state peer group of 285 employers. Inspection frequency runs at the 76th percentile. The most recent enforcement activity was recorded 5 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
REX HEAT TREAT - LANSDALE, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
75% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 20 citations in this view · $45,244 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.1026 H02 IV | 1 | 1 | $7,374 | May 2020 | May 2020 |
| 29 CFR 1910.1026 E01 | 1 | 1 | $7,374 | May 2020 | May 2020 |
| 29 CFR 1910.1026 C | 1 | 1 | $7,374 | May 2020 | May 2020 |
| 29 CFR 1910.1026 L01 III | 1 | 1 | $7,374 | May 2020 | May 2020 |
| 29 CFR 1910.1026 K01 I A | 1 | 1 | $7,374 | May 2020 | May 2020 |
| 29 CFR 1910.0028 B01 I | 1 | 1 | $7,374 | May 2020 | May 2020 |
| 29 CFR 1910.0303 B02 | 1 | 1 | $200 | Sep 1999 | Sep 1999 |
| 29 CFR 1910.0146 D04 I | 1 | 1 | $200 | Sep 1999 | Sep 1999 |
| 29 CFR 1910.0023 D01 II | 1 | 1 | $200 | Sep 1999 | Sep 1999 |
| 29 CFR 1910.0151 C | 1 | 1 | $150 | Sep 1999 | Sep 1999 |
| 5A0001 | 1 | 1 | $125 | Sep 1999 | Sep 1999 |
| 29 CFR 1910.0095 C01 | 1 | 1 | $125 | Sep 1999 | Sep 1999 |
| 29 CFR 1910.0134 E01 | 1 | 1 | — | May 2020 | May 2020 |
| 29 CFR 1910.1026 F01 I | 1 | 1 | — | May 2020 | May 2020 |
| 29 CFR 1910.1026 G02 | 1 | 1 | — | May 2020 | May 2020 |
| 29 CFR 1910.0134 F01 | 1 | 1 | — | May 2020 | May 2020 |
| 29 CFR 1910.1026 H03 III | 1 | 1 | — | May 2020 | May 2020 |
| 29 CFR 1910.0134 K01 | 1 | 1 | — | May 2020 | May 2020 |
| 29 CFR 1910.0095 K01 | 1 | 1 | — | May 2020 | May 2020 |
| 29 CFR 1910.1026 L02 I | 1 | 1 | — | May 2020 | May 2020 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3328 within PA. Peer group: 285 employers. This establishment has 33 OSHA violations; peer median is 4.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 57 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for REX HEAT TREAT - LANSDALE, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 5+ years. Most recent activity: 5 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for REX HEAT TREAT - LANSDALE, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for REX HEAT TREAT - LANSDALE, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for REX HEAT TREAT - LANSDALE, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for REX HEAT TREAT - LANSDALE, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for REX HEAT TREAT - LANSDALE, INC.. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
REX HEAT TREAT LANSDALE INC 951 W 8TH ST · LANSDALE, PA, 19446 | RCRA | No Violation Identified | 0 | 0 | — | Jun 2019 | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for REX HEAT TREAT - LANSDALE, INC.. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of DefenseFSC: 7777 NAME: SERVICE PART NUMBER:contract · Last action 2010-09-20$5,576
- Department of DefenseREX HEAT TREAT - SERVICEcontract · Last action 2009-12-02$4,191
- National Aeronautics and Space AdministrationIGF::OT::IGF SMALL BUSINESS SET-ASIDE, 76 OFFERS PLACE OF PERFORMANCE: VENDOR SITE FABRICATION OF COMMERCIAL SERVICES AND SUPPLIES FOR GODDARD SPACE FLIGHT CENTER THE ADVANCED MANUFACTURING BRANCH (AMB) IS RESPONSIBLE FOR MAINTAINING A COMPLETE MANUFACTURING FACILITY TO MEET THE CENTER'S RESEARCH AND DEVELOPMENT REQUIREMENTS AND ASSIST IN THE FABRICATION OF HARDWARE REQUIREMENTS FROM MULTIPLE NASA PROJECT MISSIONS. THIS FACILITY INCLUDES CONVENTIONAL MACHINING EQUIPMENT, NUMERICALLY CONTROLLED (NC) MACHINING CENTERS, SHEET METAL AND WELDING FABRICATION EQUIPMENT AND REMOTELY LOCATED STAFF SHOPS. VENDORS SHALL PROVIDE FABRICATION SERVICES AND SUPPLIES TO THE MANUFACTURING ENGINEERING GROUP IN THEIR RESPECTIVE AREAS OF EXPERTISE FOR THE DEVELOPMENT OF INSTRUMENTS AND SPACE FLIGHT AND NON-SPACEFLIGHT HARDWARE INTERCHANGEABLE PIECE PARTS. VENDORS WILL MANUFACTURE PER ENGINEERING DRAWINGS WITH AEROSPACE INDUSTRY TOLERANCES AND PROVIDE FABRICATION CAPABILITIES IN ACCORDANCE WITH THE STATEMENT OF WORK. TO FABRICATE CLOSE TOLERANCE AEROSPACE INSTRUMENTS AND SPACE FLIGHT GRADE PARTS, IN VARIOUS MATERIALS SUCH AS (BUT NOT LIMITED TO) ALUMINUM, TITANIUM, HIGH STRENGTH STEEL AND NICKEL ALLOY, ENGINEERING PLASTICS, AND COMPOSITES BASED ON INDUSTRY ENGINEERING DRAWINGS, PROVIDED IN ELECTRONIC FORMAT, TO INDUSTRY STANDARD TOLERANCES AND SPECIFICATIONS. PARTS MAY RANGE IN COMPLEXITY FROM VERY SIMPLE TO VERY COMPLEX, WITH QUANTITIES. EACH DISCIPLINE IS FURTHER DIVIDED INTO SUBCATEGORIES BASED ON THE EXPECTED SIZE OF FABRICATED PARTS. THE FABRICATIONS OF PRODUCTS OR SERVICES PROPOSED AS "SPACEFLIGHT" ARE REQUIRED TO BE, ISO 900I OR AS9100 COMPLAINT, ITEMS PROPOSED AS "NON-FLIGHT" WILL NOT REQUIRE RESPONDENTS TO BE ISO 9001 OR AS9100 COMPLIANT. OFFERS SHALL INDICATE IF THEY ARE ISO 9001 OR AS9100 COMPLAINT AND PROVIDE SUPPORTING DOCUMENTATION.contract · Last action 2017-09-21$1,725
- Department of DefenseFSC: 7777 NAME: SERVICE PART NUMBER:contract · Last action 2010-09-17$1,130
- Department of DefenseFSC: 7777 NAME: SERVICE:contract · Last action 2009-08-21$395
- National Aeronautics and Space AdministrationIGF::OT::IGF SMALL BUSINESS SET-ASIDE, 76 OFFERS PLACE OF PERFORMANCE: VENDOR SITE FABRICATION OF COMMERCIAL SERVICES AND SUPPLIES FOR GODDARD SPACE FLIGHT CENTER II THE ADVANCED MANUFACTURING BRANCH (AMB) IS RESPONSIBLE FOR MAINTAINING A COMPLETE MANUFACTURING FACILITY TO MEET THE CENTER'S RESEARCH AND DEVELOPMENT REQUIREMENTS AND ASSIST IN THE FABRICATION OF HARDWARE REQUIREMENTS FROM MULTIPLE NASA PROJECT MISSIONS. THIS FACILITY INCLUDES CONVENTIONAL MACHINING EQUIPMENT, NUMERICALLY CONTROLLED (NC) MACHINING CENTERS, SHEET METAL AND WELDING FABRICATION EQUIPMENT AND REMOTELY LOCATED STAFF SHOPS. VENDORS SHALL PROVIDE FABRICATION SERVICES AND SUPPLIES TO THE MANUFACTURING ENGINEERING GROUP IN THEIR RESPECTIVE AREAS OF EXPERTISE FOR THE DEVELOPMENT OF INSTRUMENTS AND SPACE FLIGHT AND NON-SPACEFLIGHT HARDWARE INTERCHANGEABLE PIECE PARTS. VENDORS WILL MANUFACTURE PER ENGINEERING DRAWINGS WITH AEROSPACE INDUSTRY TOLERANCES AND PROVIDE FABRICATION CAPABILITIES IN ACCORDANCE WITH THE STATEMENT OF WORK. TO FABRICATE CLOSE TOLERANCE AEROSPACE INSTRUMENTS AND SPACE FLIGHT GRADE PARTS, IN VARIOUS MATERIALS SUCH AS (BUT NOT LIMITED TO) ALUMINUM, TITANIUM, HIGH STRENGTH STEEL AND NICKEL ALLOY, ENGINEERING PLASTICS, AND COMPOSITES BASED ON INDUSTRY ENGINEERING DRAWINGS, PROVIDED IN ELECTRONIC FORMAT, TO INDUSTRY STANDARD TOLERANCES AND SPECIFICATIONS. PARTS MAY RANGE IN COMPLEXITY FROM VERY SIMPLE TO VERY COMPLEX, WITH QUANTITIES. EACH DISCIPLINE IS FURTHER DIVIDED INTO SUBCATEGORIES BASED ON THE EXPECTED SIZE OF FABRICATED PARTS. THE FABRICATIONS OF PRODUCTS OR SERVICES PROPOSED AS "SPACEFLIGHT" ARE REQUIRED TO BE, ISO 900I OR AS9100 COMPLAINT, ITEMS PROPOSED AS "NON-FLIGHT" WILL NOT REQUIRE RESPONDENTS TO BE ISO 9001 OR AS9100 COMPLIANT. OFFERS SHALL INDICATE IF THEY ARE ISO 9001 OR AS9100 COMPLAINT AND PROVIDE SUPPORTING DOCUMENTATION.contract · Last action 2019-10-09$0
- National Aeronautics and Space AdministrationIGF::OT::IGF SMALL BUSINESS SET-ASIDE, 76 OFFERS PLACE OF PERFORMANCE: VENDOR SITE FABRICATION OF COMMERCIAL SERVICES AND SUPPLIES FOR GODDARD SPACE FLIGHT CENTER THE ADVANCED MANUFACTURING BRANCH (AMB) IS RESPONSIBLE FOR MAINTAINING A COMPLETE MANUFACTURING FACILITY TO MEET THE CENTER'S RESEARCH AND DEVELOPMENT REQUIREMENTS AND ASSIST IN THE FABRICATION OF HARDWARE REQUIREMENTS FROM MULTIPLE NASA PROJECT MISSIONS. THIS FACILITY INCLUDES CONVENTIONAL MACHINING EQUIPMENT, NUMERICALLY CONTROLLED (NC) MACHINING CENTERS, SHEET METAL AND WELDING FABRICATION EQUIPMENT AND REMOTELY LOCATED STAFF SHOPS. VENDORS SHALL PROVIDE FABRICATION SERVICES AND SUPPLIES TO THE MANUFACTURING ENGINEERING GROUP IN THEIR RESPECTIVE AREAS OF EXPERTISE FOR THE DEVELOPMENT OF INSTRUMENTS AND SPACE FLIGHT AND NON-SPACEFLIGHT HARDWARE INTERCHANGEABLE PIECE PARTS. VENDORS WILL MANUFACTURE PER ENGINEERING DRAWINGS WITH AEROSPACE INDUSTRY TOLERANCES AND PROVIDE FABRICATION CAPABILITIES IN ACCORDANCE WITH THE STATEMENT OF WORK. TO FABRICATE CLOSE TOLERANCE AEROSPACE INSTRUMENTS AND SPACE FLIGHT GRADE PARTS, IN VARIOUS MATERIALS SUCH AS (BUT NOT LIMITED TO) ALUMINUM, TITANIUM, HIGH STRENGTH STEEL AND NICKEL ALLOY, ENGINEERING PLASTICS, AND COMPOSITES BASED ON INDUSTRY ENGINEERING DRAWINGS, PROVIDED IN ELECTRONIC FORMAT, TO INDUSTRY STANDARD TOLERANCES AND SPECIFICATIONS. PARTS MAY RANGE IN COMPLEXITY FROM VERY SIMPLE TO VERY COMPLEX, WITH QUANTITIES. EACH DISCIPLINE IS FURTHER DIVIDED INTO SUBCATEGORIES BASED ON THE EXPECTED SIZE OF FABRICATED PARTS. THE FABRICATIONS OF PRODUCTS OR SERVICES PROPOSED AS "SPACEFLIGHT" ARE REQUIRED TO BE, ISO 900I OR AS9100 COMPLAINT, ITEMS PROPOSED AS "NON-FLIGHT" WILL NOT REQUIRE RESPONDENTS TO BE ISO 9001 OR AS9100 COMPLIANT. OFFERS SHALL INDICATE IF THEY ARE ISO 9001 OR AS9100 COMPLAINT AND PROVIDE SUPPORTING DOCUMENTATION.contract · Last action 2019-08-13$0
- Department of DefenseHEAT TREAT SERVICEScontract · Last action 2010-05-28$0
Federal contract dollars to this establishment. Primary NAICS: 332811 - METAL HEAT TREATING. Last action: 2019-10-09. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2021-02-25 | Complaint | 0 | — | $0 | |
| 2020-02-21 | Planned | 16 | 15 | $44,244 | |
| 1999-05-27 | Planned | 10 | 7 | $600 | |
| 1999-05-27 | Planned | 7 | 5 | $400 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Part of a larger organization
REX HEAT TREAT - LANSDALE, INC. is one of 1 establishments rolled up under the parent organization Rexmet Corporation.
Federal enforcement records on this page represent activity at this specific establishment only. The full enforcement footprint of Rexmet Corporation across all 1 of its tracked locations is viewable on the parent profile.
Other employers in this industry and state
Other employers in metal heat treating within PA, ordered by federal enforcement volume:
- BEAVER VALLEY HEAT TREATING, INC.MONACA — 2 federal enforcement records
- MODERN INDUSTRIES, INC.ERIE — 2 federal enforcement records
- REX HEAT TREAT OF PA, INC.LANSDALE — 2 federal enforcement records
- MODERN INDUSTRIES, INC.ERIE — 2 federal enforcement records
- BRAEBURN ALLOY STEEL LLCLOWER BURRELL — 1 federal enforcement record
- ACME HEAT TREATING COMPANYPHILADELPHIA — 1 federal enforcement record
- BLUEWATER THERMAL SOLUTIONS, LLC.RIDGWAY — 1 federal enforcement record
- PENNSYLVANIA INDUSTRIAL HEAT TREATERSSAINT MARYS — 1 federal enforcement record
- SOLAR ATMOSPHERES, INC.SOUDERTON — 1 federal enforcement record
- TSI TITANIUM INC.DERRY — 1 federal enforcement record
Related searches
- All Rexmet Corporation locationsParent rollup
- Metal Heat TreatingAll employers in this industry
- Employers in PAState-wide enforcement data
- Metal Heat Treating in PAIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on REX HEAT TREAT - LANSDALE, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code. This establishment resolves to the parent rollup Rexmet Corporation.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is REX HEAT TREAT - LANSDALE, INC.'s OSHA violation history?
- REX HEAT TREAT - LANSDALE, INC. has 4 OSHA inspections on record with 33 violations and $45,244 in total penalties.
- How does REX HEAT TREAT - LANSDALE, INC.'s safety record compare to its industry?
- REX HEAT TREAT - LANSDALE, INC. operates in the metal heat treating industry. The industry average Total Recordable Incident Rate (TRIR) is 3.3. REX HEAT TREAT - LANSDALE, INC.'s self-reported DART rate is 5.81 compared to an industry average of 2.6.