Establishment profile
QUALITY TOOL & STAMPING CO.
541 E SHERMAN BLVD, MUSKEGON HEIGHTS, MI, 49444
332119 — Metal Crown, Closure, and Other Metal Stamping (except Automotive)
EIN 381871914
Summary
QUALITY TOOL & STAMPING CO. has accumulated 51 OSHA violations across 13 inspections over 32 years of recorded history, with $16,895 in total assessed penalties.
The establishment sits in the 86th percentile for violations within its industry-state peer group of 257 employers. Inspection frequency runs at the 97th percentile. The most recent enforcement activity was recorded 1 months ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
QUALITY TOOL & STAMPING CO. appears in OSHA workplace safety, EPA environmental compliance, and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, NLRB labor relations, OFLC visa and labor certification, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
69% of inspections at this establishment produced violations, with 9 inspections producing serious-or-greater violations.
Peer comparison
Worse on violations than most other employers in NAICS 3321 within MI. Peer group: 257 employers. This establishment has 51 OSHA violations; peer median is 11.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 158 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for QUALITY TOOL & STAMPING CO.. Verify directly with Occupational Safety and Health Administration →
OSHA accident events
Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.
| Date | Event | Injuries | Hospitalized | Fatalities | |
|---|---|---|---|---|---|
| Jul 16, 2018 | Amputated,Amputation,Finger,Fingertip,Lockout/Tagout,Machine Guarding,Nip Point,Press,Unguarded | 1 | — | — |
Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.
Activity timeline
Most recent federal enforcement activity recorded 1 months ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for QUALITY TOOL & STAMPING CO.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for QUALITY TOOL & STAMPING CO.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for QUALITY TOOL & STAMPING CO.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC)
No H-1B, H-2A, or H-2B labor condition applications on file for QUALITY TOOL & STAMPING CO.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
EPA Enforcement and Compliance History — Clean Air Act, Clean Water Act, RCRA, Safe Drinking Water Act. Status: No Violation Identified.
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for QUALITY TOOL & STAMPING CO.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2026-04-23 | Referral | 0 | — | $0 | |
| 2024-06-25 | Complaint | 0 | — | $0 | |
| 2018-07-16 | Referral | 2 | 1 | $4,800 | |
| 2016-10-03 | Complaint | 0 | — | $0 | |
| 2015-07-22 | Complaint | 4 | 4 | $4,750 | |
| 2010-02-10 | Planned | 1 | 1 | $240 | |
| 2009-10-26 | Planned | 8 | 3 | $1,980 | |
| 2007-08-23 | Programmed Related | 1 | 1 | $875 | |
| 2007-08-23 | Planned | 9 | 3 | $1,350 | |
| 2006-10-12 | Planned | 0 | — | $0 | |
| 2005-07-06 | Planned | 2 | 2 | $875 | |
| 1996-06-21 | Planned | 9 | 1 | $375 | |
| 1993-11-01 | Planned | 15 | 6 | $1,650 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in metal crown, closure, and other metal stamping (except automotive) within MI, ordered by federal enforcement volume:
- UNISTRUT INTERNATIONAL CORPORATIONWAYNE — 3 federal enforcement records
- RIDGEVIEW INDUSTRIESGRAND RAPIDS — 2 federal enforcement records
- GESTAMPLAPEER — 2 federal enforcement records
- WOLVERINE METAL STAMPINGSAINT JOSEPH — 2 federal enforcement records
- EDMAR MANUFACTURING INC.HOLLAND — 2 federal enforcement records
- FREEDOM FINISHINGBENTON HARBOR — 2 federal enforcement records
- SYNERGY PROTOTYPE STAMPING LLCCLINTON TOWNSHIP — 2 federal enforcement records
- MIDDLEVILLE TOOL & DIE CO INCMIDDLEVILLE — 1 federal enforcement record
- CODEE STAMPING INC.HASTINGS — 1 federal enforcement record
- PRECISION METAL SPINNING INCFENTON — 1 federal enforcement record
Related searches
- Metal Crown, Closure, and Other Metal Stamping (except Automotive)All employers in this industry
- Employers in MIState-wide enforcement data
- Metal Crown, Closure, in MIIndustry × state cross-filter
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →About this data
This profile aggregates federal enforcement records on QUALITY TOOL & STAMPING CO. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Frequently asked
- What is QUALITY TOOL & STAMPING CO.'s OSHA violation history?
- QUALITY TOOL & STAMPING CO. has 13 OSHA inspections on record with 51 violations and $16,895 in total penalties.
- How does QUALITY TOOL & STAMPING CO.'s safety record compare to its industry?
- QUALITY TOOL & STAMPING CO. operates in the metal crown, closure, and other metal stamping (except automotive) industry. The industry average Total Recordable Incident Rate (TRIR) is 4.2. QUALITY TOOL & STAMPING CO.'s self-reported DART rate is 2.35 compared to an industry average of 2.5.