Establishment profile
QUALITY PLATING COMPANY OF TULSA, INC.
2665 N DARLINGTON AVE., TULSA, OK, 74115
332813 — Electroplating, Plating, Polishing, Anodizing, and Coloring
Summary
QUALITY PLATING COMPANY OF TULSA, INC. has accumulated 26 OSHA violations across 7 inspections over 41 years of recorded history, with $4,758 in total assessed penalties.
The establishment sits in the 80th percentile for violations within its industry-state peer group of 36 employers. Inspection frequency runs at the 91st percentile. The most recent enforcement activity was recorded 12 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
QUALITY PLATING COMPANY OF TULSA, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
71% of inspections at this establishment produced violations, with 5 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 23 citations in this view · $4,758 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0133 A01 | 2 | 2 | $840 | Oct 1990 | May 1994 |
| 29 CFR 1910.0107 G02 | 2 | 2 | $780 | Oct 1990 | May 1994 |
| 29 CFR 1910.0107 B05 I | 2 | 2 | — | Oct 1990 | Oct 1990 |
| 29 CFR 1910.0178 Q07 | 1 | 1 | $1,428 | Nov 2013 | Nov 2013 |
| 29 CFR 1910.0107 C02 | 1 | 1 | $600 | May 1994 | May 1994 |
| 29 CFR 1910.0107 C05 | 1 | 1 | $240 | Oct 1990 | Oct 1990 |
| 29 CFR 1910.1200 E01 | 1 | 1 | $150 | Oct 1990 | Oct 1990 |
| 29 CFR 1910.0107 B05 IV | 1 | 1 | $120 | Oct 1990 | Oct 1990 |
| 29 CFR 1910.0106 E02 IIB | 1 | 1 | $120 | Oct 1990 | Oct 1990 |
| 29 CFR 1910.1200 F04 II | 1 | 1 | $120 | Oct 1990 | Oct 1990 |
| 29 CFR 1910.0094 D10 | 1 | 1 | $120 | Nov 1984 | Nov 1984 |
| 29 CFR 1910.1025 D02 | 1 | 1 | $90 | Oct 1990 | Oct 1990 |
| 29 CFR 1910.0132 A | 1 | 1 | $90 | Oct 1990 | Oct 1990 |
| 29 CFR 1910.0212 A05 | 1 | 1 | $60 | Oct 1990 | Oct 1990 |
| 29 CFR 1910.0134 E05 I | 1 | 1 | — | May 1994 | May 1994 |
| 29 CFR 1910.1025 L01 I | 1 | 1 | — | Oct 1990 | Oct 1990 |
| 29 CFR 1910.1025 J01 I | 1 | 1 | — | Oct 1990 | Oct 1990 |
| 29 CFR 1910.1025 L01 II | 1 | 1 | — | Oct 1990 | Oct 1990 |
| 29 CFR 1910.0134 B01 | 1 | 1 | — | Oct 1990 | Oct 1990 |
| 29 CFR 1910.0020 G02 | 1 | 1 | — | Oct 1990 | Oct 1990 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3328 within OK. Peer group: 36 employers. This establishment has 26 OSHA violations; peer median is 7.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 41 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for QUALITY PLATING COMPANY OF TULSA, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 12+ years. Most recent activity: 12 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for QUALITY PLATING COMPANY OF TULSA, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for QUALITY PLATING COMPANY OF TULSA, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for QUALITY PLATING COMPANY OF TULSA, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for QUALITY PLATING COMPANY OF TULSA, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for QUALITY PLATING COMPANY OF TULSA, INC.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for QUALITY PLATING COMPANY OF TULSA, INC.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2013-08-26 | Planned | 1 | 1 | $1,428 | |
| 1994-03-30 | Planned | 4 | 3 | $1,950 | |
| 1992-02-27 | Planned | 0 | — | $0 | |
| 1991-01-31 | Follow-up | 0 | — | $0 | |
| 1990-08-22 | Planned | 6 | 5 | $720 | |
| 1990-08-22 | Planned | 13 | 10 | $540 | |
| 1984-11-07 | Planned | 2 | 1 | $120 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in electroplating, plating, polishing, anodizing, and coloring within OK, ordered by federal enforcement volume:
- QUALITY METAL FINISHING, INC.OKLAHOMA CITY — 3 federal enforcement records
- SOUTHWEST UNITED INDUSTRIES, INC.TULSA — 2 federal enforcement records
- CUNNINGHAM SANDBLASTING AND PAINTING CO. INC.NOWATA — 1 federal enforcement record
- MODERN PLATING CO. INC.TULSA — 1 federal enforcement record
- SOONER COATING, LLCCATOOSA — 1 federal enforcement record
- DCI INDUSTRIESOKLAHOMA CITY — 1 federal enforcement record
- CHARLIE STRONG DBA CHARLIE'S PLATINGTULSA — 1 federal enforcement record
- FORD SANDBLASTINGEUFAULA — 1 federal enforcement record
- ALUMINUM HARDCOAT COMPANYTULSA — 1 federal enforcement record
Related searches
- Electroplating, Plating, Polishing, Anodizing, and ColoringAll employers in this industry
- Employers in OKState-wide enforcement data
- Electroplating, Plating, Polishing, in OKIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on QUALITY PLATING COMPANY OF TULSA, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is QUALITY PLATING COMPANY OF TULSA, INC.'s OSHA violation history?
- QUALITY PLATING COMPANY OF TULSA, INC. has 7 OSHA inspections on record with 26 violations and $4,758 in total penalties.
- How does QUALITY PLATING COMPANY OF TULSA, INC.'s safety record compare to its industry?
- QUALITY PLATING COMPANY OF TULSA, INC. operates in the electroplating, plating, polishing, anodizing, and coloring industry. The industry average Total Recordable Incident Rate (TRIR) is 4.1. QUALITY PLATING COMPANY OF TULSA, INC.'s self-reported DART rate is 0 compared to an industry average of 2.3.