Establishment profile
PROCESS CONTROL LABORATORY
2520 N ONTARIO ST. #D, BURBANK, CA, 91504
332813 — Electroplating, Plating, Polishing, Anodizing, and Coloring
Summary
PROCESS CONTROL LABORATORY has accumulated 14 OSHA violations across 3 inspections over 30 years of recorded history, with $3,435 in total assessed penalties.
The establishment sits in the 80th percentile for violations within its industry-state peer group of 355 employers. Inspection frequency runs at the 79th percentile. The most recent enforcement activity was recorded 7 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
PROCESS CONTROL LABORATORY appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 14 distinct standards shown · 14 citations in this view · $3,435 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 5162(C) | 1 | 1 | $1,575 | May 2019 | May 2019 |
| 5162 A | 1 | 1 | $325 | Aug 1996 | Aug 1996 |
| 3480 A | 1 | 1 | $325 | Aug 1996 | Aug 1996 |
| 29 CFR 2340.0023 | 1 | 1 | $250 | Aug 1996 | Aug 1996 |
| 3382 A | 1 | 1 | $250 | Aug 1996 | Aug 1996 |
| 5162(E) | 1 | 1 | $130 | May 2019 | May 2019 |
| 29 CFR 2500.0010 A | 1 | 1 | $110 | Aug 1996 | Aug 1996 |
| 29 CFR 2340.0016 A | 1 | 1 | $85 | May 2019 | May 2019 |
| 3380(F)(2) | 1 | 1 | $85 | May 2019 | May 2019 |
| 5192(Q)(1) | 1 | 1 | $85 | May 2019 | May 2019 |
| 5207(D)(1)(A) | 1 | 1 | $85 | May 2019 | May 2019 |
| LC6431 | 1 | 1 | $50 | Aug 1996 | Aug 1996 |
| 461 A | 1 | 1 | $50 | Aug 1996 | Aug 1996 |
| 5162 B | 1 | 1 | $30 | Aug 1996 | Aug 1996 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3328 within CA. Peer group: 355 employers. This establishment has 14 OSHA violations; peer median is 5.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for PROCESS CONTROL LABORATORY. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for PROCESS CONTROL LABORATORY. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 7+ years. Most recent activity: 7 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for PROCESS CONTROL LABORATORY. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for PROCESS CONTROL LABORATORY. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for PROCESS CONTROL LABORATORY. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for PROCESS CONTROL LABORATORY. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for PROCESS CONTROL LABORATORY. Verify directly with Environmental Protection Agency →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2019-02-27 | Complaint | 6 | 1 | $2,045 | |
| 1996-06-04 | Referral | 5 | 4 | $980 | |
| 1996-06-04 | Referral | 3 | 1 | $410 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in electroplating, plating, polishing, anodizing, and coloring within CA, ordered by federal enforcement volume:
- AUTOMATION PLATING CORPORATIONGLENDALE — 2 federal enforcement records
- HIXSON METAL FINISHINGNEWPORT BEACH — 2 federal enforcement records
- ANDRES TECHNICAL PLATING INCPLACENTIA — 2 federal enforcement records
- ASSOCIATED PLATING COMPANYSANTA FE SPRINGS — 2 federal enforcement records
- ALCO CAD-NICKEL PLATING CORPLOS ANGELES — 2 federal enforcement records
- LA HABRA PLATING CO.LA HABRA — 2 federal enforcement records
- SERVICE PLATING CO., INC.LOS ANGELES — 2 federal enforcement records
- PRECIOUS METALS PLATINGSANTA ANA — 2 federal enforcement records
- ALL METALS PROCESSING OF ORANGE COUNTY, LLCSTANTON — 2 federal enforcement records
- FINE QUALITY METAL FINISHING, INC.LONG BEACH — 2 federal enforcement records
Related searches
- Electroplating, Plating, Polishing, Anodizing, and ColoringAll employers in this industry
- Employers in CAState-wide enforcement data
- Electroplating, Plating, Polishing, in CAIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on PROCESS CONTROL LABORATORY from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is PROCESS CONTROL LABORATORY's OSHA violation history?
- PROCESS CONTROL LABORATORY has 3 OSHA inspections on record with 14 violations and $3,435 in total penalties.
- How does PROCESS CONTROL LABORATORY's safety record compare to its industry?
- PROCESS CONTROL LABORATORY operates in the electroplating, plating, polishing, anodizing, and coloring industry. The industry average Total Recordable Incident Rate (TRIR) is 4.1.