Establishment profile
PRECISION MACHINE & SUPPLY, INC.
3218 E. MAIN STREET, LEWISTON, ID, 83501
332312 — Fabricated Structural Metal Manufacturing
Summary
PRECISION MACHINE & SUPPLY, INC. has accumulated 4 OSHA violations across 2 inspections over 41 years of recorded history, with $1,190 in total assessed penalties.
The establishment sits in the 48th percentile for violations within its industry-state peer group of 63 employers. Inspection frequency runs at the 61st percentile. The most recent enforcement activity was recorded 13 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
PRECISION MACHINE & SUPPLY, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
50% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 4 distinct standards shown · 4 citations in this view · $1,190 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 5A0001 | 1 | 1 | $1,190 | Dec 2012 | Dec 2012 |
| 29 CFR 1910.0110 D10 | 1 | 1 | — | Dec 2012 | Dec 2012 |
| 29 CFR 1910.0157 C01 | 1 | 1 | — | Dec 2012 | Dec 2012 |
| 29 CFR 1910.0303 G01 | 1 | 1 | — | Dec 2012 | Dec 2012 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Below average violations in NAICS 3323 within ID. Peer group: 63 employers. This establishment has 4 OSHA violations; peer median is 4.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for PRECISION MACHINE & SUPPLY, INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for PRECISION MACHINE & SUPPLY, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 13+ years. Most recent activity: 13 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for PRECISION MACHINE & SUPPLY, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for PRECISION MACHINE & SUPPLY, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for PRECISION MACHINE & SUPPLY, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for PRECISION MACHINE & SUPPLY, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for PRECISION MACHINE & SUPPLY, INC.. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
PRECISION MACHINE & SUPPLY, INC. 3218 E. MAIN STREET · LEWISTON, ID, 83501 | RCRA | No Violation Identified | 0 | 0 | — | Nov 2014 | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for PRECISION MACHINE & SUPPLY, INC.. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
Consolidated across all USAspending recipient entities under this corporate parent — not attributable to this single location.
- Department of the InteriorMODERNIZATION, CONVERSION, AND OVERHAUL OF PRESSURE REGULATING VALVES, HOOVER DAM, AZ-NVcontract · Last action 2015-09-18$16,389,796
- Department of the InteriorPROVIDE ALL PERSONNEL, EQUIPMENT, MATERIALS, SUPERVISION AND OTHER ITEMS AND SERVICES NECESSARY TO DISASSEMBLE AND REMOVE THE PRESSURE REGULATING UNITS; PACK AND TRANSPORT THE UNITS TO AND FROM THE FACILITY TO BE REFURBISHED; AND ASSEMBLY AND RE-INSTALLATION BACK AT HOOVER DAM. WORK INCLUDES THE REPLACEMENT OF BUSHINGS, SEATS, SEAL RINGS, AND GASKETS; ALL NECESSARY MACHINING TO REFURBISH THE PRVS TO LIKE NEW CONDITION; REPAIR OF CAVITATION DAMAGE, INCLUDING THE AREA BELOW THE VALVE SEAT, EITHER BY WELDING OR REPLACEMENT OF STEEL PARTS; RE-ASSEMBLY OF ALL PRV PARTS; ADJUSTMENT TO EACH PRV IN ACCORDANCE WITH THE OEM REQUIREMENTS; AND PERFORMANCE TESTING.contract · Last action 2011-03-25$5,953,820
- Department of the InteriorDESIGN STUDY AND MANFUACT OF STAINLESS SETEEL WICKET GATES FOR CAPACITY/EFFICIENCY INCREASE OF ALLIS-CHALMERS TURBINEScontract · Last action 2011-09-28$2,152,611
- Department of the InteriorMANUFACTURE OF NEW STAINLESS STEEL WICKET GATES FOR UNIT N8, HOOVER DAM POWERPLANT.contract · Last action 2012-02-09$1,144,028
- Department of DefenseFURNISH A NEW THRUST COLLAR AND THRUST RUNNER FOR BONNEVILLE 2ND POWERHOUSE UNIT 11.contract · Last action 2015-08-12$642,139
- Department of DefenseGUIDE BEARING SHOES FOR DWORSHAK DAM, THRUST BEARING SHOES AND APPURTENANCES FOR LITTLE GOOSE DAM, AND THRUST BEARING RUNNER AND APPURTENANCES FOR LITTLE GOOSE DAM.contract · Last action 2012-09-24$441,980
- Department of the InteriorPARADOX GATE REPAIRcontract · Last action 2014-09-16$406,574
- Department of the InteriorREFURBISHMENT OF IN-PLACE COMPONENTS ON UNIT N3 AT HOOVER DAM.contract · Last action 2011-01-03$396,320
- Department of the InteriorREFURBISHMENT OF IN-PLACE COMPONENTS ON UNIT N8 AT HOOVER DAM.contract · Last action 2011-11-25$386,050
- Department of the InteriorIGF::OT::IGF EMERGENCY - TOPPENISH CREEK PUMP HOUSE 800 HP MOTOR REPAIRcontract · Last action 2015-06-11$373,440
- Department of the InteriorREFURBISHMENT OF IN-PLACE COMPONENTS ON UNIT A8 AT HOOVER DAMcontract · Last action 2013-01-09$372,156
- Department of the InteriorFACING PLATES, PLUGS, AND BREAK-OFF SCREWS FOR HOOVER DAM UNIT N8contract · Last action 2011-12-16$346,456
- Department of the InteriorFACING PLATES AND BREAK-OFF SCREWS FOR HOOVER DAM UNIT A6contract · Last action 2010-02-02$330,666
- Department of the InteriorFACING PLATES, PLUGS, AND BREAK-OFF SCREWS FOR HOOVER DAM UNIT N3contract · Last action 2010-09-08$327,240
- Department of the InteriorDRUM GATE HOSES FOR HOOVER DAMcontract · Last action 2013-12-31$326,720
- Department of the InteriorWICKET GATE LINE BORING ON UNIT N3 AT HOOVER DAM.contract · Last action 2011-01-11$315,349
- Department of the InteriorFACING PLATES, PLUGS, AND BREAK-OFF SCREWS FOR HOOVER DAM UNIT A8contract · Last action 2013-02-07$307,995
- Department of the InteriorPARADOX GATE REPAIR OF LOWER NEVADAcontract · Last action 2013-02-17$304,960
- Department of the InteriorWICKET GATE LINE BORING ON UNIT A8 AT HOOVER DAMcontract · Last action 2013-03-15$256,275
- Department of the InteriorREFURBISHMENT OF IN-PLACE COMPONENTS ON UNIT N4 AT HOOVER DAMcontract · Last action 2008-12-01$244,658
- Department of the InteriorN6 SHIFTING RING REFURBISHMENTcontract · Last action 2015-02-02$212,331
- Department of the InteriorREFURBISHMENT OF IN-PLACE COMPONENTS ON UNIT A6 AT HOOVER DAMcontract · Last action 2010-02-02$205,937
- Department of the InteriorN3 SHIFTING RING, HOOVER DAMcontract · Last action 2011-02-18$200,947
- Department of the InteriorIGF::OT::IGF OTHER FUNCTIONS : HOLLOW JET VALVE REHABILITATION, ANDERSON RANCH DAM, IDAHOcontract · Last action 2013-04-09$200,277
- Department of the InteriorUNIT N4 SHIFTING RINGcontract · Last action 2009-01-26$197,300
- Department of the InteriorN8 SHIFTING RING, HOOVER DAMcontract · Last action 2012-02-09$181,800
- Department of the InteriorREBUILD AND REFURBISH THE UNIT A6 SHIFTING RING, HOOVER DAMcontract · Last action 2010-03-12$177,300
- Department of the InteriorREBABBITT THRUST SHOE BEARINGScontract · Last action 2007-11-21$137,250
- Department of the InteriorREFURBISHMENT OF IN-PLACE COMPONENTS ON UNIT A3 AT HOOVER DAMcontract · Last action 2014-08-12$115,155
- Department of DefenseESBS PINS, BEARINGS, DRIVE SHAFT COMPONENTScontract · Last action 2013-09-30$112,463
- Department of the InteriorREFURBISH PUMP IMPELLER FOR RECLAMATION POWER PLANTcontract · Last action 2011-02-24$95,185
- Department of the InteriorIGF::OT::IGF CON: EMERGENCY REPAIR PUMP&MOTOR (WIP)contract · Last action 2015-05-07$89,997
- Department of the InteriorMODIFICATION OF STAY VANES ON UNIT N8 AT HOOVER DAM.contract · Last action 2011-11-21$71,661
- Department of the InteriorREPAIR AND REHAB TO THRUST BEARINGSS & BEARING BLOCKS USED IN RECLAMATION OWNED POWERPLANTcontract · Last action 2009-09-21$69,310
- Department of the InteriorSTAINLESS STEEL WICKET GATES N7contract · Last action 2009-04-03$58,941
- Department of the InteriorA% THRUST BEARING COLLAR & RUNNER REPAIRScontract · Last action 2010-01-21$58,016
- Department of the InteriorMODIFICATION OF STAY VANES ON UNIT N7 AT HOOVER DAMcontract · Last action 2007-11-14$56,943
- Department of the InteriorMODIFY PRV MECHANICAL LINKAGE UNITS N1 AND N2, HOOVER DAMcontract · Last action 2007-10-18$55,284
- Department of the InteriorPRECISION MACHINE WORK ON JF CARR UNIT 2 THRUST BEARINGcontract · Last action 2010-04-02$47,418
- Department of the InteriorWICKET GATE BUSHINGS FOR HOOVER DAM UNIT N6contract · Last action 2014-09-10$45,813
- Department of the InteriorA8 THRUST COLLAR AND ROTATING RINGcontract · Last action 2013-08-09$33,000
- Department of the InteriorHOOVER DAM UNIT N3 KEY BAR FABRICATIONcontract · Last action 2011-04-04$32,912
- Department of the InteriorN4 TURBINE SHAFT 42-INCH STUFFING BOX REPAIRcontract · Last action 2009-02-11$32,290
- Department of the InteriorN7 THRUST COLLAR (KINGSBURY REWORK)contract · Last action 2008-06-03$30,808
- Department of the InteriorN8 HEADCOVER 316 STAINLESS STEEL WEAR PLATES AND N8 GREASELESS WEAR PADS FOR EXTENSION, HOOVER DAMcontract · Last action 2011-12-16$30,270
- Department of the InteriorN3 TURBINE SHAFT 42-INCH STUFFING BOX REPAIRcontract · Last action 2011-03-05$29,122
- Department of the InteriorUNIT A1 WICKET GATE THRUST COLLARScontract · Last action 2014-04-24$27,960
- Department of the InteriorIGF::OT::IGF DOMESTIC WATER PUMP-PIPING INSTALLATIONcontract · Last action 2014-10-28$27,764
- Department of the InteriorEMERGENCY REPAIR OF THRUST BEARING ASSEMBLY FOR PARKER DAM UNIT P1contract · Last action 2008-06-27$24,875
- Department of DefenseINTAKE GATE LIFTING EYEScontract · Last action 2009-09-09$24,430
Federal contract dollars to this establishment. Primary NAICS: 333611 - TURBINE AND TURBINE GENERATOR SET UNITS MANUFACTURING. Last action: 2018-11-01. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2012-09-13 | Planned | 4 | 1 | $1,190 | |
| 1984-11-15 | Planned | 0 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in fabricated structural metal manufacturing within ID, ordered by federal enforcement volume:
- RIGBY STEEL & FABRICATION, INCRIGBY — 1 federal enforcement record
- MOUNTAIN INDUSTRIES INCORPORATEDKUNA — 1 federal enforcement record
- IDAHO EQUIPMENT & SHEET METAL COMPANYRUPERT — 1 federal enforcement record
- OUTLAND STEEL, INC.CALDWELL — 1 federal enforcement record
- K & T STEEL CORPORATIONTWIN FALLS — 1 federal enforcement record
- WORTH STEEL, LLCPOCATELLO — 1 federal enforcement record
- BOISE METAL WORKS, INC.BOISE — 1 federal enforcement record
- CUMMINS METAL FABRICATIONBELLEVUE — 1 federal enforcement record
- NORTH STAR FABRICATORS, INC.POCATELLO — 1 federal enforcement record
- FRESH AIR MANUFACTURING COMPANYNAMPA — 1 federal enforcement record
Related searches
- Fabricated Structural Metal ManufacturingAll employers in this industry
- Employers in IDState-wide enforcement data
- Fabricated Structural Metal in IDIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on PRECISION MACHINE & SUPPLY, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is PRECISION MACHINE & SUPPLY, INC.'s OSHA violation history?
- PRECISION MACHINE & SUPPLY, INC. has 2 OSHA inspections on record with 4 violations and $1,190 in total penalties.
- How does PRECISION MACHINE & SUPPLY, INC.'s safety record compare to its industry?
- PRECISION MACHINE & SUPPLY, INC. operates in the fabricated structural metal manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.4.