Summary
PILLER PLASTICS INC has accumulated 4 OSHA violations across 3 inspections over 34 years of recorded history.
The establishment sits in the 69th percentile for violations within its industry-state peer group of 67,392 employers. Inspection frequency runs at the 94th percentile. The most recent enforcement activity was recorded 29 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
PILLER PLASTICS INC appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
67% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 4 distinct standards shown · 4 citations in this view.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 0245.653101 | 1 | 1 | — | Feb 1996 | Feb 1996 |
| 29 CFR 0247.350901 | 1 | 1 | — | Feb 1996 | Feb 1996 |
| 29 CFR 0249.560902 A | 1 | 1 | — | Apr 1992 | Apr 1992 |
| 29 CFR 0620.540901 | 1 | 1 | — | Apr 1992 | Apr 1992 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Above average violations. Peer group: 67,392 employers. This establishment has 4 OSHA violations; peer median is 2.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for PILLER PLASTICS INC. Verify directly with OSHA Injury Tracking Application →
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for PILLER PLASTICS INC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 29+ years. Most recent activity: 29 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for PILLER PLASTICS INC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for PILLER PLASTICS INC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for PILLER PLASTICS INC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for PILLER PLASTICS INC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for PILLER PLASTICS INC. Verify directly with Environmental Protection Agency →
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for PILLER PLASTICS INC. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- General Services AdministrationNFES 2725,WEDGE,PLASTIC,FELLING: WEDGE SOLID, 30.5+1.25CM LONG;8.00CM WIDE,3.10 CM THICK. 0.40 ON THIN END. WEDGE COMPOSED OF MOLDED ACRYLONIT- RILE BUTADIENE STYRENE IAW ASTM D4673-98 (112),. LIGHT BLUE, REQUIREMENTS ASTM D1788(DISCONTINUE) TYPE 2, GRADE 2, CLASS 4 IS ACCEPTABLE. TWENTY- FOUR WEDGES PACKED IN FIBERBOARD BOX, 200 PSI BOX. NFES NUMBER MARKING REQUIRED. MARK PER FED- STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX.contract · Last action 2014-03-19$10,300
- General Services AdministrationNFES 2725,WEDGE,PLASTIC,FELLING: WEDGE SOLID, 30.5+1.25CM LONG;8.00CM WIDE,3.10 CM THICK. 0.40 ON THIN END. WEDGE COMPOSED OF MOLDED ACRYLONIT- RILE BUTADIENE STYRENE IAW ASTM D4673-98 (112),. LIGHT BLUE, REQUIREMENTS ASTM D1788(DISCONTINUE) TYPE 2, GRADE 2, CLASS 4 IS ACCEPTABLE. TWENTY- FOUR WEDGES PACKED IN FIBERBOARD BOX, 200 PSI BOX. NFES NUMBER MARKING REQUIRED. MARK PER FED- STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX.contract · Last action 2012-02-15$4,892
- General Services AdministrationTAS::47 4534 001::TAS NFES 2725,WEDGE,PLASTIC,FELLING: WEDGE SOLID, 30.5+1.25CM LONG;8.00CM WIDE,3.10 CM THICK. 0.40 ON THIN END. WEDGE COMPOSED OF MOLDED ACRYLONIT- RILE BUTADIENE STYRENE IAW ASTM D4673-98 (112),. LIGHT BLUE, REQUIREMENTS ASTM D1788(DISCONTINUE) TYPE 2, GRADE 2, CLASS 4 IS ACCEPTABLE. TWENTY- FOUR WEDGES PACKED IN FIBERBOARD BOX, 200 PSI BOX. NFES NUMBER MARKING REQUIRED. MARK PER FED- STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX.contract · Last action 2010-03-15$3,951
- General Services AdministrationNFES 2725,WEDGE,PLASTIC,FELLING: WEDGE SOLID, 30.5+1.25CM LONG;8.00CM WIDE,3.10 CM THICK. 0.40 ON THIN END. WEDGE COMPOSED OF MOLDED ACRYLONIT- RILE BUTADIENE STYRENE IAW ASTM D4673-98 (112),. LIGHT BLUE, REQUIREMENTS ASTM D1788(DISCONTINUE) TYPE 2, GRADE 2, CLASS 4 IS ACCEPTABLE. TWENTY- FOUR WEDGES PACKED IN FIBERBOARD BOX, 200 PSI BOX. NFES NUMBER MARKING REQUIRED. MARK PER FED- STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX.contract · Last action 2013-06-11$3,461
- General Services AdministrationDESCR N.A.contract · Last action 2008-12-04$3,162
- General Services AdministrationDESCR N.A.contract · Last action 2008-07-10$3,162
- General Services AdministrationDESCR N.A.contract · Last action 2008-10-30$2,833
- General Services AdministrationDESCR N.A.contract · Last action 2009-01-07$2,284
- General Services AdministrationDESCR N.A.contract · Last action 2009-01-29$2,196
- General Services AdministrationNFES 2725,WEDGE,PLASTIC,FELLING: WEDGE SOLID, 30.5+1.25CM LONG;8.00CM WIDE,3.10 CM THICK. 0.40 ON THIN END. WEDGE COMPOSED OF MOLDED ACRYLONIT- RILE BUTADIENE STYRENE IAW ASTM D4673-98 (112),. LIGHT BLUE, REQUIREMENTS ASTM D1788(DISCONTINUE) TYPE 2, GRADE 2, CLASS 4 IS ACCEPTABLE. TWENTY- FOUR WEDGES PACKED IN FIBERBOARD BOX, 200 PSI BOX. NFES NUMBER MARKING REQUIRED. MARK PER FED- STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX.contract · Last action 2011-07-14$1,882
- General Services AdministrationNFES 2725,WEDGE,PLASTIC,FELLING: WEDGE SOLID, 30.5+1.25CM LONG;8.00CM WIDE,3.10 CM THICK. 0.40 ON THIN END. WEDGE COMPOSED OF MOLDED ACRYLONIT- RILE BUTADIENE STYRENE IAW ASTM D4673-98 (112),. LIGHT BLUE, REQUIREMENTS ASTM D1788(DISCONTINUE) TYPE 2, GRADE 2, CLASS 4 IS ACCEPTABLE. TWENTY- FOUR WEDGES PACKED IN FIBERBOARD BOX,200 PSI BOX. NFES NUMBER MARKING REQUIRED. MARK PER FED- STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX.contract · Last action 2009-12-15$1,788
- General Services AdministrationDESCR N.A.contract · Last action 2008-01-16$1,683
- General Services AdministrationDESCR N.A.contract · Last action 2009-03-04$1,669
- General Services AdministrationDESCR N.A.contract · Last action 2008-07-23$1,669
- General Services AdministrationDESCR N.A.contract · Last action 2007-11-20$1,603
- General Services AdministrationDESCR N.A.contract · Last action 2008-04-11$1,581
- General Services AdministrationDESCR N.A.contract · Last action 2008-03-07$1,523
- General Services AdministrationNFES 2725,WEDGE,PLASTIC,FELLING: WEDGE SOLID, 30.5+1.25CM LONG;8.00CM WIDE,3.10 CM THICK. 0.40 ON THIN END. WEDGE COMPOSED OF MOLDED ACRYLONIT- RILE BUTADIENE STYRENE IAW ASTM D4673-98 (112),. LIGHT BLUE, REQUIREMENTS ASTM D1788(DISCONTINUE) TYPE 2, GRADE 2, CLASS 4 IS ACCEPTABLE. TWENTY- FOUR WEDGES PACKED IN FIBERBOARD BOX, 200 PSI BOX. NFES NUMBER MARKING REQUIRED. MARK PER FED- STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX.contract · Last action 2011-05-25$1,505
- General Services AdministrationNFES 2725,WEDGE,PLASTIC,FELLING: WEDGE SOLID, 30.5+1.25CM LONG;8.00CM WIDE,3.10 CM THICK. 0.40 ON THIN END. WEDGE COMPOSED OF MOLDED ACRYLONIT- RILE BUTADIENE STYRENE IAW ASTM D4673-98 (112),. LIGHT BLUE, REQUIREMENTS ASTM D1788(DISCONTINUE) TYPE 2, GRADE 2, CLASS 4 IS ACCEPTABLE. TWENTY- FOUR WEDGES PACKED IN FIBERBOARD BOX, 200 PSI BOX. NFES NUMBER MARKING REQUIRED. MARK PER FED- STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX.contract · Last action 2012-01-10$1,223
- General Services AdministrationNFES 2725,WEDGE,PLASTIC,FELLING: WEDGE SOLID, 30.5+1.25CM LONG;8.00CM WIDE,3.10 CM THICK. 0.40 ON THIN END. WEDGE COMPOSED OF MOLDED ACRYLONIT- RILE BUTADIENE STYRENE IAW ASTM D4673-98 (112),. LIGHT BLUE, REQUIREMENTS ASTM D1788(DISCONTINUE) TYPE 2, GRADE 2, CLASS 4 IS ACCEPTABLE. TWENTY- FOUR WEDGES PACKED IN FIBERBOARD BOX, 200 PSI BOX. NFES NUMBER MARKING REQUIRED. MARK PER FED- STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX.contract · Last action 2011-01-06$1,223
- General Services AdministrationWEDGE, TIMBER: WEDGE TIMBER OVERALL LENGTH: 8" HEAD WIDTH: 3" MATERIAL - HIGH IMPACT ABScontract · Last action 2008-08-27$1,068
- General Services AdministrationWEDGE, TIMBER: WEDGE TIMBER OVERALL LENGTH: 8" HEAD WIDTH: 3" MATERIAL - HIGH IMPACT ABS PLASTIC. USED FOR FELLING OR BUCKING TIMBER. HAS GROVES AND RIDGES TO HELP HOLD A STRAIGHT LINE WHEN DRIVEN INTO TREE. PILLAR PLASTICS INC PN: PM8 (PARTIAL DESCRIPTION)contract · Last action 2009-07-30$997
- General Services AdministrationNFES 2725,WEDGE,PLASTIC,FELLING: WEDGE SOLID, 30.5+1.25CM LONG;8.00CM WIDE,3.10 CM THICK. 0.40 ON THIN END. WEDGE COMPOSED OF MOLDED ACRYLONIT- RILE BUTADIENE STYRENE IAW ASTM D4673-98 (112),. LIGHT BLUE, REQUIREMENTS ASTM D1788(DISCONTINUE) TYPE 2, GRADE 2, CLASS 4 IS ACCEPTABLE. TWENTY- FOUR WEDGES PACKED IN FIBERBOARD BOX, 200 PSI BOX. NFES NUMBER MARKING REQUIRED. MARK PER FED- STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX.contract · Last action 2012-03-15$753
- General Services AdministrationOTHER THAN SCHEDULEcontract · Last action 2014-05-29$0
- General Services AdministrationOTHER THAN SCHEDULEcontract · Last action 2011-03-09$0
Federal contract dollars to this establishment. Primary NAICS: 332212 - HAND AND EDGE TOOL MANUFACTURING. Last action: 2014-05-29. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 1996-08-14 | Follow-up | 0 | — | $0 | |
| 1995-12-27 | Planned | 2 | — | $0 | |
| 1992-03-17 | Planned | 2 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Related searches
- Employers in WAState-wide enforcement data
About this data
This profile aggregates federal enforcement records on PILLER PLASTICS INC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is PILLER PLASTICS INC's OSHA violation history?
- PILLER PLASTICS INC has 3 OSHA inspections on record with 4 violations and $0 in total penalties.