Skip to main content
FastDOL

Establishment profile

ORCON CORP.

1570 ATLANTIC, UNION CITY, CA, 94587

Download as PDF →

OSHA inspections
3
over 38 years
Violations
5
$2,700 in penalties
Penalties
$2,700
$540 avg
Accident investigations on record
1 hospitalizations

Summary

ORCON CORP. has accumulated 5 OSHA violations across 3 inspections over 38 years of recorded history, with $2,700 in total assessed penalties.

The establishment sits in the 82nd percentile for violations within its industry-state peer group of 119,385 employers. Inspection frequency runs at the 95th percentile. The most recent enforcement activity was recorded 30 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

ORCON CORP. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification, FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
3
0.1 / yr · last 38 yrs
Violations
5
0.1 / yr
Penalties
$2,700
$540 avg / violation
40% serious60% other
Inspection trigger · complaint
1 of 3
Inspection trigger · accident
1 of 3

67% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.

Peer comparison

82nd

Worse on violations than most other employers. Peer group: 119,385 employers. This establishment has 5 OSHA violations; peer median is 1.

Fewer violationsMore violations
Penalty percentile
92nd
peer median: $0
Inspection frequency
95th
peer median: 1

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for ORCON CORP.. Verify directly with OSHA Injury Tracking Application →

Inspection breakdown

Planned
1
Complaint
1
Accident
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for ORCON CORP.. Verify directly with Occupational Safety and Health Administration →

OSHA accident events

Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.

DateEventInjuriesHospitalizedFatalities
Feb 8, 1991BURN,REPAIR,SAFETY RELIEF VALVE,WORK RULES,MECHANIC,CLOGGED,EXPLOSION,CHEMICAL REACTION,HIGH PRESSURE,HIGH TEMPERATURE21—

Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.

Activity timeline

Data refreshed
Weekly
First OSHA inspection
—
Most recent activity
30 years ago

No federal enforcement activity has been recorded against this establishment in 30+ years. Most recent activity: 30 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for ORCON CORP.. Verify directly with Wage and Hour Division →

Mine safety (MSHA)

No MSHA mine safety violations on file for ORCON CORP.. Verify directly with Mine Safety and Health Administration →

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for ORCON CORP.. Verify directly with National Labor Relations Board →

Visa & labor certification (OFLC)

No H-1B, H-2A, or H-2B labor condition applications on file for ORCON CORP.. Verify directly with Office of Foreign Labor Certification →

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for ORCON CORP.. Verify directly with Environmental Protection Agency →

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for ORCON CORP.. Verify directly with UVA Corporate Prosecution Registry →

Federal contracts

This location

Obligated (5-yr)
$0
Obligated (all-time)
$678K
Awards
77
Top agency
Department of Defense
$311K
Top agencies by obligation (this location)
Department of Defense$311K
General Services Administration$272K
Department of Homeland Security$87K
National Aeronautics and Space Administration$9K
Largest awards (top 50 of 77)
  • General Services Administration
    SOUND CONTROLLING BLANKET CL II GREEN #34432 ________(((SHIP TO ADDRESS)))______________ PAC/FAC = FMS SPECIAL SHIPPING INSTRUCTIONS APPLY CALL 800-479-7842 6:00A TO 3:30P PACIFIC TIME FOR ASSISTANCE OR FAX REQUEST TO 209-547-8744
    contract · Last action 2012-07-25
    $101,700
  • Department of Defense
    NOUN: FIRE RETARDENT FABRIC
    contract · Last action 2013-08-01
    $86,030
  • Department of Defense
    FIRE RETARDANT FABRIC
    contract · Last action 2013-05-20
    $60,172
  • General Services Administration
    INSULATION, BLANKET, THERMAL AND ACOUSTICAL, AIR CRAFT; FIBERGLASS, RESIN TREAT WATER REPELLENT, 2 IN TK DENSITY 0.6 LB./CU. FT. W 36 IN NOM TEMP RATE 300 DEG. FA. TRIM CLOTH ONE SIDE COLOR BLU E CHIP NO. 25414 FED STD NO. 595. FIBERLGLASS BA TTING SUPPLD ONE 2 IN LAYER OR TWO 1 IN LAYERS. ORCON AEROSPACE P/N 63014-IAW RFQ7FLA-P6-5640.1 JAT
    contract · Last action 2009-11-05
    $59,940
  • Department of Defense
    4525995211!PLASTIC SHEET
    contract · Last action 2013-11-18
    $43,052
  • Department of Defense
    INSULATION MATERIALS
    contract · Last action 2013-02-05
    $24,594
  • Department of Defense
    NOUN: FIBERGLASS INSULATION
    contract · Last action 2013-11-06
    $20,931
  • Department of Defense
    INSULATION, AIRCRAFT; P/N56508; LACG-597
    contract · Last action 2013-09-26
    $19,863
  • General Services Administration
    SOUND CONTROLLING BLANKET; SHALL BE IN ACCORDAN CE WITH MILITARY SPECIFICATION MIL-I-7171C DATED JUNE 15, 1965 AND AMENDMENT 1 DATED OCTOBER 9, 1981. THE BLANKET SHALL HAVE THE FOLLOWING CHAR ACTERISTICS; TYPE I - QUILTED BLANKET; CLASS 2 STYLE A - NON-POROUS TR IM CLOTH; THICKNESS - 1/2 INCH; SHALL BE ASBESTO S FREE; LENGTH - 50 YEARDS +/- 1 YARD. ONE FACE FOR DECORATIVE PURPOSES. COLOR SHALL BE GREEN TO APPROXIMATE COLOR CHIP NO. 34424 OF FEDERAL S TANDARD NO. 595. EXCETPTIONS TO MILITARY SPECIF ICATION MIL-I-7171C; 1. PARAGRAPTH 3.1.2, DELE TE " MIL-B-5924, TYPE 1" AND REPLACE WITH " ASTM C 800, TYPE 1, GRADE A, CLASS 3" 2. PARAGRAPH
    contract · Last action 2016-08-12
    $17,190
  • Department of Homeland Security
    PURCHASE OF INSULATION BLANKET, BATTING AND TAPE REPAIR FOR C130
    contract · Last action 2012-01-23
    $15,099
  • Department of Homeland Security
    PURCHASE: P/N 57000, P/N 57010 AND P/N 56503
    contract · Last action 2012-07-11
    $14,660
  • Department of Defense
    8503393013!COVERING,EXTERNAL S
    contract · Last action 2016-06-30
    $14,007
  • General Services Administration
    SOUND CONTROL BLANKET
    contract · Last action 2017-02-16
    $10,520
  • Department of Homeland Security
    INSUL BLANKET
    contract · Last action 2012-07-24
    $9,865
  • National Aeronautics and Space Administration
    363 LF AN-90D FILM
    contract · Last action 2013-08-15
    $9,148
  • General Services Administration
    SOUND CONTROLLING BLANKET; SHALL BE IN ACCORDAN CE WITH MILITARY SPECIFICATION MIL-I-7171C DATED JUNE 15, 1965 AND AMENDMENT 1 DATED OCTOBER 9, 1981. THE BLANKET SHALL HAVE THE FOLLOWING CHAR ACTERISTICS; TYPE I - QUILTED BLANKET; CLASS 2 STYLE A - NON-POROUS TR IM CLOTH; THICKNESS - 1/2 INCH; SHALL BE ASBESTO S FREE; LENGTH - 50 YEARDS +/- 1 YARD. ONE FACE FOR DECORATIVE PURPOSES. COLOR SHALL BE GREEN TO APPROXIMATE COLOR CHIP NO. 34424 OF FEDERAL S TANDARD NO. 595. EXCETPTIONS TO MILITARY SPECIF ICATION MIL-I-7171C; 1. PARAGRAPTH 3.1.2, DELE TE " MIL-B-5924, TYPE 1" AND REPLACE WITH " ASTM C 800, TYPE 1, GRADE A, CLASS 3" 2. PARAGRAPH JAT
    contract · Last action 2009-09-24
    $7,761
  • Department of Homeland Security
    7510-01LG49397 TAPE, 3" WIDE, REINFORCED META
    contract · Last action 2015-10-06
    $7,358
  • General Services Administration
    SOUND CONTROLLING BLANKET; SHALL BE IN ACCORDAN CE WITH MILITARY SPECIFICATION MIL-I-7171C DATED JUNE 15, 1965 AND AMENDMENT 1 DATED OCTOBER 9, 1981. THE BLANKET SHALL HAVE THE FOLLOWING CHAR ACTERISTICS; TYPE I - QUILTED BLANKET; CLASS 2 STYLE A - NON-POROUS TR IM CLOTH; THICKNESS - 1/2 INCH; SHALL BE ASBESTO S FREE; LENGTH - 50 YEARDS +/- 1 YARD. ONE FACE FOR DECORATIVE PURPOSES. COLOR SHALL BE GREEN TO APPROXIMATE COLOR CHIP NO. 34424 OF FEDERAL S TANDARD NO. 595. EXCETPTIONS TO MILITARY SPECIF ICATION MIL-I-7171C; 1. PARAGRAPTH 3.1.2, DELE TE " MIL-B-5924, TYPE 1" AND REPLACE WITH " ASTM C 800, TYPE 1, GRADE A, CLASS 3" 2. PARAGRAPH
    contract · Last action 2015-10-28
    $6,948
  • Department of Homeland Security
    ROLLS INSULATION BLANKET
    contract · Last action 2012-08-06
    $6,360
  • Department of Defense
    "MICAP BUY IN SUPPORT OF C-130 WEAPONS SYSTEM. NOUN: INSULATION BATTING, PART NUMBERS: 57000 AND 57010."
    contract · Last action 2016-08-05
    $6,065
  • General Services Administration
    SOUND CONTROLLING BLANKET; SHALL BE IN ACCORDAN CE WITH MILITARY SPECIFICATION MIL-I-7171C DATED P/N 63002 JUNE 15, 1965 AND AMENDMENT 1 DATED OCTOBER 9, 1981. THE BLANKET SHALL HAVE THE FOLLOWING CHAR ACTERISTICS; TYPE I - QUILTED BLANKET; CLASS 2 STYLE A - NON-POROUS TR IM CLOTH; THICKNESS - 1/2 INCH; SHALL BE ASBESTO S FREE; LENGTH - 50 YEARDS +/- 1 YARD. ONE FACE FOR DECORATIVE PURPOSES. COLOR SHALL BE GREEN TO APPROXIMATE COLOR CHIP NO. 34424 OF FEDERAL S TANDARD NO. 595. EXCETPTIONS TO MILITARY SPECIF ICATION MIL-I-7171C; 1. PARAGRAPTH 3.1.2, DELE TE " MIL-B-5924, TYPE 1" AND REPLACE WITH " ASTM C 800, TYPE 1, GRADE A, CLASS 3" 2. PARAGRAPH JAT
    contract · Last action 2015-02-10
    $5,925
  • Department of Defense
    INSULATION, GREEN FIBERGLASS
    contract · Last action 2013-10-31
    $5,829
  • Department of Defense
    INSULATION, GREEN FIBERGLASS
    contract · Last action 2014-07-24
    $5,813
  • Department of Defense
    32100683 STM26-701 TY3 CL4 GRA 1 "T X 48
    contract · Last action 2013-01-02
    $5,375
  • Department of Defense
    COVER FILM, REINFORCED, TYPE II 52"
    contract · Last action 2015-06-03
    $5,002
  • Department of Defense
    NOUN: INSULATION, GREEN FIBERGLASS
    contract · Last action 2015-02-04
    $4,993
  • General Services Administration
    SOUND CONTROLLING BLANKET: IAW MIL-I-7171C - USE OF ASBESTOS PROHIBITED: TYPE I - QUILTED BLANKET - CLASS 2- FULLY-STITCHED - SYTLE A - NON-POROUS TRIM CLOTH - THICKNESS - 1/4 IN - LENGTH - 50 YARDS MINIMUM - ONE FACE FOR DECOR- ATIVE PURPOSES - COLOR SHALL BE GREEN APPROXIMA- TE COLOR CHIP NO. 34424 OF FEDERAL STANDARD NO 595 - EXCEPTIONS TO SPEC MIL-I-7171C: 1. PARA 3.1.2, DELETE MIL-B-5924, TYPE I AND REPLACE WITH ASTM C800, TYPE 1, GRADE A, CLASS 4, 2. PARAGRAPH 3.6, AMEND TO READ WIDTH - UNLESS OTHERWISE SPECIFIED (SEE PARA 6.2) THE USABLE WIDTH OF ASSEMBLE BLANKEDS SHALL BE A MINIMUM OF 35 1/2 INCHES AND A MAXIMUM OF 38 IN AWARD MADE IAW RFQ 5640-00-269-1049 DATED 5/13/2011, INCORPORATED, AND MADE PART OF THIS AWARD. C3
    contract · Last action 2011-05-17
    $4,962
  • General Services Administration
    INSULATION BLANKET, THERMAL; FIBERGLASS BAT W/ S HEET MATRL BOTH SIDES, GLASS CLOTH ONE SIDE, SIL ICON IMPREGNATED GLASS CLOTH OTHER SIDE. QUILTED W/ DIAMONG STITCHED PATTERN (2" X 6" ) SEWN W/ G LASS THREAD. GREEN COLOR IAW FED STD. 595, COLOR CHIP NO. 34558. THK - 1/4" , WD - 36" , LG - 100: . ROLLS OF INSUL CONTAIN NOT MORE THAN 3 PIECES NO PEICE LESS THAN 5: IN LG. TEMP. RANGE 100 TO 500 DEG F. REFERENCE QUOTED DATED 3/16/2015 BY SUSAN MATTIE
    contract · Last action 2015-03-20
    $4,896
  • General Services Administration
    INSULATION BLANKET, THERMAL; FIBERGLASS BAT W/ S HEET MATRL BOTH SIDES, GLASS CLOTH ONE SIDE, SIL ICON IMPREGNATED GLASS CLOTH OTHER SIDE. QUILTED W/ DIAMONG STITCHED PATTERN (2" X 6" ) SEWN W/ G LASS THREAD. GREEN COLOR IAW FED STD. 595, COLOR CHIP NO. 34558. THK - 1/4" , WD - 36" , LG - 100: . ROLLS OF INSUL CONTAIN NOT MORE THAN 3 PIECES NO PEICE LESS THAN 5: IN LG. TEMP. RANGE 100 TO 500 DEG F.
    contract · Last action 2016-06-23
    $4,769
  • General Services Administration
    SOUND CONTROLLING BLANKET: IAW MIL-I-7171C -P/N 63001 USE OF ASBESTOS PROHIBITED: TYPE I - QUILTED BLANKET - CLASS 2- FULLY-STITCHED - SYTLE A - NON-POROUS TRIM CLOTH - THICKNESS - 1/4 IN - LENGTH - 50 YARDS MINIMUM - ONE FACE FOR DECOR- ATIVE PURPOSES - COLOR SHALL BE GREEN APPROXIMA- TE COLOR CHIP NO. 34424 OF FEDERAL STANDARD NO 595 - EXCEPTIONS TO SPEC MIL-I-7171C: 1. PARA 3.1.2, DELETE MIL-B-5924, TYPE I AND REPLACE WITH ASTM C800, TYPE 1, GRADE A, CLASS 4, 2. PARAGRAPH 3.6, AMEND TO READ WIDTH - UNLESS OTHERWISE SPECIFIED (SEE PARA 6.2) THE USABLE WIDTH OF ASSEMBLE BLANKEDS SHALL BE A MINIMUM OF 35 1/2 INCHES AND A MAXIMUM OF 38 IN JAT
    contract · Last action 2015-02-10
    $4,608
  • Department of Homeland Security
    WAREHOUSE SUPPLY ORDER 54 ROLLS - 7510 01-LG4-9397 TAPE, 3" WIDE, REINFORCED META TAPE, 3" WIDE, REINFORCED METALLIZED POLYVINYL FLUORIDE, DULL GRAY, 3.3 OUNCES PER SQUARE YARD, 10 POUND TENSILE STRE NGTH FLAME RETARDANT, ACRYLIC ADHESIVE COATED, PRESSURE SENSITIVE, 60 YARD/ROLL.
    contract · Last action 2009-10-23
    $4,419
  • Department of Homeland Security
    7510-01-LG4-9397, P/N: OT-157T, 122157T030, TAPE 3" WIDE,REINDORCED METALLIZED, 48 ROLLS
    contract · Last action 2010-03-17
    $4,060
  • Department of Defense
    MATERIALS FOR MANUFACTURING AIRCRAFT INSULATION
    contract · Last action 2012-09-04
    $4,049
  • Department of Defense
    NON-DEVELOPMENTAL AND NON-STOCK LISTED BATTING INSULATION; PART NUMBER 507010 STM26-702E SCT2GAAC 2 IN SUPPORT OF THE C-130 WEAPON SYSTEM.
    contract · Last action 2015-08-26
    $3,859
  • General Services Administration
    SOUND CONTROLLING BLANKET; SHALL BE IN ACCORDAN CE WITH MILITARY SPECIFICATION MIL-I-7171C DATED JUNE 15, 1965 AND AMENDMENT 1 DATED OCTOBER 9, 1981. THE BLANKET SHALL HAVE THE FOLLOWING CHAR ACTERISTICS; TYPE I - QUILTED BLANKET; CLASS 2 STYLE A - NON-POROUS TR IM CLOTH; THICKNESS - 1/2 INCH; SHALL BE ASBESTO S FREE; LENGTH - 50 YEARDS +/- 1 YARD. ONE FACE FOR DECORATIVE PURPOSES. COLOR SHALL BE GREEN TO APPROXIMATE COLOR CHIP NO. 34424 OF FEDERAL S TANDARD NO. 595. EXCETPTIONS TO MILITARY SPECIF ICATION MIL-I-7171C; 1. PARAGRAPTH 3.1.2, DELE TE " MIL-B-5924, TYPE 1" AND REPLACE WITH " ASTM C 800, TYPE 1, GRADE A, CLASS 3" 2. PARAGRAPH JAT
    contract · Last action 2009-09-24
    $3,761
  • Department of Homeland Security
    FILM FOR AIRCRAFT HC144 A
    contract · Last action 2013-02-27
    $3,735
  • General Services Administration
    SOUND CONTROLLING BLANKET: IAW MIL-I-7171C - USE OF ASBESTOS PROHIBITED: TYPE I - QUILTED BLANKET - CLASS 2- FULLY-STITCHED - SYTLE A - NON-POROUS TRIM CLOTH - THICKNESS - 1/4 IN - LENGTH - 50 YARDS MINIMUM - ONE FACE FOR DECOR- ATIVE PURPOSES - COLOR SHALL BE GREEN APPROXIMA- TE COLOR CHIP NO. 34424 OF FEDERAL STANDARD NO 595 - EXCEPTIONS TO SPEC MIL-I-7171C: 1. PARA 3.1.2, DELETE MIL-B-5924, TYPE I AND REPLACE WITH ASTM C800, TYPE 1, GRADE A, CLASS 4, 2. PARAGRAPH 3.6, AMEND TO READ WIDTH - UNLESS OTHERWISE SPECIFIED (SEE PARA 6.2) THE USABLE WIDTH OF ASSEMBLE BLANKEDS SHALL BE A MINIMUM OF 35 1/2 INCHES AND A MAXIMUM OF 38 IN
    contract · Last action 2013-07-29
    $3,618
  • General Services Administration
    SOUND CONTROLLING BLANKET; SHALL BE IN ACCORDAN CE WITH MILITARY SPECIFICATION MIL-I-7171C DATED JU
    contract · Last action 2008-01-15
    $3,610
  • General Services Administration
    SOUND CONTROLLING BLANKET: IAW MIL-I-7171C - USE OF ASBESTOS PROHIBITED: TYPE I - QUILTED BLANKET - CLASS 2- FULLY-STITCHED - SYTLE A - NON-POROUS TRIM CLOTH - THICKNESS - 1/4 IN - LENGTH - 50 YARDS MINIMUM - ONE FACE FOR DECOR- ATIVE PURPOSES - COLOR SHALL BE GREEN APPROXIMA- TE COLOR CHIP NO. 34424 OF FEDERAL STANDARD NO 595 - EXCEPTIONS TO SPEC MIL-I-7171C: 1. PARA 3.1.2, DELETE MIL-B-5924, TYPE I AND REPLACE WITH ASTM C800, TYPE 1, GRADE A, CLASS 4, 2. PARAGRAPH 3.6, AMEND TO READ WIDTH - UNLESS OTHERWISE SPECIFIED (SEE PARA 6.2) THE USABLE WIDTH OF ASSEMBLE BLANKEDS SHALL BE A MINIMUM OF 35 1/2 INCHES AND A MAXIMUM OF 38 IN PN: 63001
    contract · Last action 2012-07-16
    $3,547
  • Department of Homeland Security
    REPAIR TAPE, INSULATION BLANKET, STRAIGHT GREEN TAPE, & BINDING TAPE
    contract · Last action 2009-06-24
    $3,081
  • Department of Homeland Security
    REPAIR TAPE
    contract · Last action 2012-07-31
    $2,844
  • General Services Administration
    TAS::97 4930::TAS INSULATION, BLANKET, THERMAL AND ACOUSTICAL, AIR CRAFT; FIBERGLASS, RESIN TREAT WATER REPELLENT, 2 IN TK DENSITY 0.6 LB./CU. FT. W 36 IN NOM TEMP RATE 300 DEG. FA. TRIM CLOTH ONE SIDE COLOR BLU E CHIP NO. 25414 FED STD NO. 595. FIBERLGLASS BA TTING SUPPLD ONE 2 IN LAYER OR TWO 1 IN LAYERS. JAT
    contract · Last action 2010-04-23
    $2,745
  • General Services Administration
    INSULATION, BLANKET, THERMAL AND ACOUSTICAL, AIR CRAFT; FIBERGLASS, RESIN TREAT WATER REPELLENT, 2 IN TK DENSITY 0.6 LB./CU. FT. W 36 IN NOM TEMP RATE 300 DEG. FA. TRIM CLOTH ONE SIDE COLOR BLU E CHIP NO. 25414 FED STD NO. 595. FIBERLGLASS BA TTING SUPPLD ONE 2 IN LAYER OR TWO 1 IN LAYERS. AWARD MADE IAW RFQ FOR 5640-00-149-1373 DATED 5/12/2011, INCORPORATED, AND MADE PART OF THIS AWARD. C3
    contract · Last action 2011-05-17
    $2,580
  • General Services Administration
    SOUND CONTROLLING BLANKET; SHALL BE IN ACCORDAN CE WITH MILITARY SPECIFICATION MIL-I-7171C DATED JUNE 15, 1965 AND AMENDMENT 1 DATED OCTOBER 9, 1981. THE BLANKET SHALL HAVE THE FOLLOWING CHAR ACTERISTICS; TYPE I - QUILTED BLANKET; CLASS 2 STYLE A - NON-POROUS TR IM CLOTH; THICKNESS - 1/2 INCH; SHALL BE ASBESTO S FREE; LENGTH - 50 YEARDS +/- 1 YARD. ONE FACE FOR DECORATIVE PURPOSES. COLOR SHALL BE GREEN TO APPROXIMATE COLOR CHIP NO. 34424 OF FEDERAL S TANDARD NO. 595. EXCETPTIONS TO MILITARY SPECIF ICATION MIL-I-7171C; 1. PARAGRAPTH 3.1.2, DELE TE " MIL-B-5924, TYPE 1" AND REPLACE WITH " ASTM C 800, TYPE 1, GRADE A, CLASS 3" 2. PARAGRAPH
    contract · Last action 2011-09-08
    $2,001
  • General Services Administration
    SOUND CONTROLLING BLANKET; SHALL BE IN ACCORDAN CE WITH MILITARY SPECIFICATION MIL-I-7171C DATED JU
    contract · Last action 2008-07-22
    $1,993
  • Department of Homeland Security
    REPAIR TAPE/15 ROLLS
    contract · Last action 2013-03-01
    $1,896
  • General Services Administration
    SOUND CONTROLLING BLANKET; SHALL BE IN ACCORDAN CE WITH MILITARY SPECIFICATION MIL-I-7171C DATED JUNE 15, 1965 AND AMENDMENT 1 DATED OCTOBER 9, 1981. THE BLANKET SHALL HAVE THE FOLLOWING CHAR ACTERISTICS; TYPE I - QUILTED BLANKET; CLASS 2 STYLE A - NON-POROUS TR IM CLOTH; THICKNESS - 1/2 INCH; SHALL BE ASBESTO S FREE; LENGTH - 50 YEARDS +/- 1 YARD. ONE FACE FOR DECORATIVE PURPOSES. COLOR SHALL BE GREEN TO APPROXIMATE COLOR CHIP NO. 34424 OF FEDERAL S TANDARD NO. 595. EXCETPTIONS TO MILITARY SPECIF ICATION MIL-I-7171C; 1. PARAGRAPTH 3.1.2, DELE TE " MIL-B-5924, TYPE 1" AND REPLACE WITH " ASTM C 800, TYPE 1, GRADE A, CLASS 3" 2. PARAGRAPH JAT
    contract · Last action 2009-09-24
    $1,881
  • General Services Administration
    SOUND CONTROLLING BLANKET; SHALL BE IN ACCORDAN CE WITH MILITARY SPECIFICATION MIL-I-7171C DATED JU
    contract · Last action 2008-11-07
    $1,870
  • Department of Homeland Security
    AIRCRAFT PARTS REINFORCED COVERING FILM
    contract · Last action 2013-11-14
    $1,862
  • General Services Administration
    TAS::97 4930::TAS INSULATION, BLANKET, THERMAL AND ACOUSTICAL, AIR CRAFT; FIBERGLASS, RESIN TREAT WATER REPELLENT, 2 IN TK DENSITY 0.6 LB./CU. FT. W 36 IN NOM TEMP RATE 300 DEG. FA. TRIM CLOTH ONE SIDE COLOR BLU E CHIP NO. 25414 FED STD NO. 595. FIBERLGLASS BA TTING SUPPLD ONE 2 IN LAYER OR TWO 1 IN LAYERS. JAT
    contract · Last action 2010-04-23
    $1,830

Federal contract dollars to this establishment. Primary NAICS: 336413 - OTHER AIRCRAFT PARTS AND AUXILIARY EQUIPMENT MANUFACTURING. Last action: 2017-02-16. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.

Inspection history

DateTriggerViolationsSeriousPenalty
1996-03-29Complaint41$2,400
1991-02-13Accident11$300
1987-07-14Planned0—$0

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Related searches

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

About this data

This profile aggregates federal enforcement records on ORCON CORP. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Frequently asked

What is ORCON CORP.'s OSHA violation history?
ORCON CORP. has 3 OSHA inspections on record with 5 violations and $2,700 in total penalties.