Summary
OCALA SAW & TOOL CORP has accumulated 22 OSHA violations across 4 inspections over 53 years of recorded history, with $175 in total assessed penalties.
The establishment sits in the 98th percentile for violations within its industry-state peer group of 71,899 employers. Inspection frequency runs at the 97th percentile. The most recent enforcement activity was recorded 43 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
OCALA SAW & TOOL CORP appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
50% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 21 citations in this view · $175 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0309 A 011017 | 2 | 2 | $25 | Jun 1973 | Apr 1976 |
| 29 CFR 1910.0213 C01 | 1 | 1 | $150 | Apr 1976 | Apr 1976 |
| 29 CFR 1910.0094 C04 II | 1 | 1 | — | Apr 1976 | Apr 1976 |
| 29 CFR 1910.0106 B06 | 1 | 1 | — | Apr 1976 | Apr 1976 |
| 29 CFR 1910.0107 C06 | 1 | 1 | — | Apr 1976 | Apr 1976 |
| 29 CFR 1910.0107 C07 | 1 | 1 | — | Apr 1976 | Apr 1976 |
| 29 CFR 1910.0107 D05 | 1 | 1 | — | Apr 1976 | Apr 1976 |
| 29 CFR 1910.0107 G07 | 1 | 1 | — | Apr 1976 | Apr 1976 |
| 29 CFR 1910.0212 A05 | 1 | 1 | — | Apr 1976 | Apr 1976 |
| 29 CFR 1910.0309 B 025062 | 1 | 1 | — | Apr 1976 | Apr 1976 |
| 29 CFR 1910.0094 C04 I | 1 | 1 | — | Apr 1976 | Apr 1976 |
| 29 CFR 1910.0309 A 011022 | 1 | 1 | — | Apr 1976 | Apr 1976 |
| 29 CFR 1910.0309 A 040010 | 1 | 1 | — | Apr 1976 | Apr 1976 |
| 29 CFR 1910.0023 B01 | 1 | 1 | — | Apr 1976 | Apr 1976 |
| 29 CFR 1910.0213 I01 | 1 | 1 | — | Apr 1976 | Apr 1976 |
| 29 CFR 1910.0215 A02 | 1 | 1 | — | Apr 1976 | Apr 1976 |
| 29 CFR 1910.0215 B12 | 1 | 1 | — | Apr 1976 | Apr 1976 |
| 29 CFR 1910.0252 A02 IVC | 1 | 1 | — | Apr 1976 | Apr 1976 |
| 29 CFR 1910.0213 D01 | 1 | 1 | — | Jun 1973 | Jun 1973 |
| 29 CFR 1910.0215 A04 | 1 | 1 | — | Jun 1973 | Jun 1973 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer. Peer group: 71,899 employers. This establishment has 22 OSHA violations; peer median is 2.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for OCALA SAW & TOOL CORP. Verify directly with OSHA Injury Tracking Application →
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for OCALA SAW & TOOL CORP. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 43+ years. Most recent activity: 43 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for OCALA SAW & TOOL CORP. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for OCALA SAW & TOOL CORP. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for OCALA SAW & TOOL CORP. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for OCALA SAW & TOOL CORP. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for OCALA SAW & TOOL CORP. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for OCALA SAW & TOOL CORP. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 1982-09-16 | Planned | 0 | — | $0 | |
| 1976-04-23 | Follow-up | 0 | — | $0 | |
| 1976-03-12 | Planned | 18 | — | $150 | |
| 1973-05-15 | Planned | 4 | — | $25 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Related searches
- Employers in FLState-wide enforcement data
About this data
This profile aggregates federal enforcement records on OCALA SAW & TOOL CORP from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is OCALA SAW & TOOL CORP's OSHA violation history?
- OCALA SAW & TOOL CORP has 4 OSHA inspections on record with 22 violations and $175 in total penalties.