Skip to main content
FastDOL

Establishment profile

OBERG INDUSTRIES

2301 SILVERVILLE ROAD, FREEPORT, PA, 16229
Operated by Oberg Industries LLC · 1 of 2 establishments
333514 — Special Die and Tool, Die Set, Jig, and Fixture Manufacturing
EIN 251879849

Download as PDF →

OSHA inspections
8
over 34 years
Violations
18
$7,713 in penalties
Penalties
$7,713
$428 avg
Accident investigations on record
4 National Emphasis Program inspections

Summary

OBERG INDUSTRIES has accumulated 18 OSHA violations across 8 inspections over 34 years of recorded history, with $7,713 in total assessed penalties.

The establishment sits in the 88th percentile for violations within its industry-state peer group of 226 employers. Inspection frequency runs at the 98th percentile. The most recent enforcement activity was recorded 7 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

OBERG INDUSTRIES appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.

OSHA workplace safety

Inspections
8
0.2 / yr · last 34 yrs
Violations
18
0.5 / yr
Penalties
$7,713
$428 avg / violation
67% serious33% other
Inspection trigger · planned
8 of 8

38% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.

Peer comparison

88th

Worse on violations than most other employers in NAICS 3335 within PA. Peer group: 226 employers. This establishment has 18 OSHA violations; peer median is 4.

Fewer violationsMore violations
Penalty percentile
87th
peer median: $1,037
Inspection frequency
98th
peer median: 2

Safety self-report (OSHA 300A)

Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.

DART rate
1.2
vs industry
−0.2
TRIR
1.2
vs industry
−1.6

Reported for 187 average annual employees at this establishment.

Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.

Industry benchmark

Industry avg TRIR
2.8
BLS SOII 2024
Industry avg DART
1.4
BLS SOII 2024
Self-reported TRIR
1.2
OSHA ITA Form 300A (employer self-reported)

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
8

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for OBERG INDUSTRIES. Verify directly with Occupational Safety and Health Administration →

Activity timeline

Data refreshed
Weekly
First OSHA inspection
—
Most recent activity
7 years ago

No federal enforcement activity has been recorded against this establishment in 7+ years. Most recent activity: 7 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for OBERG INDUSTRIES. Verify directly with Wage and Hour Division →

Mine safety (MSHA)

No MSHA mine safety violations on file for OBERG INDUSTRIES. Verify directly with Mine Safety and Health Administration →

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for OBERG INDUSTRIES. Verify directly with National Labor Relations Board →

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for OBERG INDUSTRIES. Verify directly with Office of Foreign Labor Certification →

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for OBERG INDUSTRIES. Verify directly with Environmental Protection Agency →

Motor carrier safety (FMCSA)

DOT number
2920686
Operation
C

Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for OBERG INDUSTRIES. Verify directly with UVA Corporate Prosecution Registry →

Federal contracts

This location

Obligated (5-yr)
$7.3M
Obligated (all-time)
$11.3M
Awards
217
Top agency
Department of the Treasury
$11.3M
Top agencies by obligation (this location)
Department of the Treasury$11.3M
Department of Defense$0
Largest awards (top 50 of 217)
  • Department of the Treasury
    DN OY1 BULK BAG STATIONS (2 UNITS) SERVICES OBERG 2031JG23D00019 CONTRACT
    contract · Last action 2026-03-18
    $2,137,618
  • Department of the Treasury
    PHILADELPHIA OY1 BULK BAG STATION SERVICES
    contract · Last action 2026-03-18
    $1,934,232
  • Department of the Treasury
    DN PROTOTYPE BULK BAG STATION SERVICES ON CONTRACT 2031JG23D00019
    contract · Last action 2025-03-12
    $933,467
  • Department of the Treasury
    PH PROTOTYPE BULK BAG STATION SERVICES ON CONTRACT 2031JG23D00019
    contract · Last action 2024-08-29
    $666,054
  • Department of the Treasury
    OBERG BLANKING DIES: TWO (2) TYPE 6 NICKEL BLANKING DIES AND TWO (2) TYPE 6 DIME BLANKING DIES
    contract · Last action 2025-08-12
    $461,170
  • Department of the Treasury
    DELIVERY CHUTES FOR FOUR COUNT AND BAG STATIONS
    contract · Last action 2023-06-29
    $379,052
  • Department of the Treasury
    BULK BAGGING MACHINE UPGRADE
    contract · Last action 2015-09-17
    $288,855
  • Department of the Treasury
    NEW BLANKING DIES AND REPAIR KIT FOR OBERG
    contract · Last action 2015-12-11
    $267,935
  • Department of the Treasury
    DIE REBUILD KITS FOR SEVERAL SERIAL NUMBER SETS
    contract · Last action 2017-11-13
    $182,660
  • Department of the Treasury
    REQ BY: DHRDLICKA, JUSTIFICATION: NEEDED TO REPLACE WORN OUT BLANKING DIES
    contract · Last action 2012-09-17
    $171,550
  • Department of the Treasury
    DIES
    contract · Last action 2014-05-05
    $166,195
  • Department of the Treasury
    BULK BAGGER UPGRADES
    contract · Last action 2015-06-24
    $139,950
  • Department of the Treasury
    PURCHASE LARGE AND SMALL OBVERSE ANVILS FOR USE IN PRODUCTION
    contract · Last action 2022-06-27
    $138,720
  • Department of the Treasury
    IGF::OT::IGF NEW BULK BAGGER DESIGN
    contract · Last action 2014-09-02
    $127,946
  • Department of the Treasury
    REQ BY: DHRDLICKA, JUSTIFICATION: 2 (TWO)NICKEL BLANKING DIES TO REPLACE OLD WORN OUT BLANKING DIES, VENDOR: OBERG INDUSTRIES CONTACT: DANIEL BOWMAN
    contract · Last action 2011-03-08
    $127,050
  • Department of the Treasury
    NEW DIME BLANKING DIE
    contract · Last action 2022-12-22
    $110,445
  • Department of the Treasury
    REBUILD KIT, NICKEL DIE, TYPE 4, OBERG #T-4-RBD-KIT-05
    contract · Last action 2025-07-17
    $95,090
  • Department of the Treasury
    MANUFACTURE AND INSTALL NEW CHUTES & CONVEYORS ON COIN HANDLERS
    contract · Last action 2021-01-19
    $94,315
  • Department of the Treasury
    *** ON DEMAND *** REBUILD KIT, DIME DIE, TYPE 4 ALTERED TYPE 5, OBERG, T-*4-RPR-KIT-10 USER PRODUCT CODE: 5136440004333
    contract · Last action 2025-04-29
    $93,710
  • Department of the Treasury
    BLANKING DIE ASSEMBLY
    contract · Last action 2021-06-10
    $88,300
  • Department of the Treasury
    REBUILD KIT, QUARTER DIE, TYPE 4, T-RBD-KIT-25
    contract · Last action 2024-07-23
    $80,150
  • Department of the Treasury
    REPAIR KITS, STRIKE, PLATE
    contract · Last action 2019-01-24
    $74,700
  • Department of the Treasury
    UPGRADE OBSOLETE LIGHT CURTAIN CONTROL SYSTEM AND RELAYS ON 8 BULK BAG COUNT STATIONS
    contract · Last action 2019-06-10
    $72,821
  • Department of the Treasury
    DIE KITS FOR QUARTER AND NICKELS
    contract · Last action 2018-12-03
    $72,475
  • Department of the Treasury
    NICKEL DIE
    contract · Last action 2008-01-23
    $62,825
  • Department of the Treasury
    BULK BAGGING UNIT
    contract · Last action 2015-03-03
    $61,826
  • Department of the Treasury
    SIEMANS MASTER DRIVE ASSEMBLY
    contract · Last action 2009-03-31
    $54,444
  • Department of the Treasury
    OBERG DIES
    contract · Last action 2022-06-02
    $52,844
  • Department of the Treasury
    DN BULK BAG STATION LIGHT CURTAIN/LIFT/CHUTE DESIGN CO SERVICES 23D-00019- 2031JG23F00381 -PAR MNTH03E47700
    contract · Last action 2024-03-01
    $50,672
  • Department of the Treasury
    FOR OBERG DIES
    contract · Last action 2016-09-26
    $50,420
  • Department of the Treasury
    MAXIMO PART - REBUILD KIT OBERG #T-4-RBD-KIT-05
    contract · Last action 2023-12-04
    $49,450
  • Department of the Treasury
    MAXIMO - TYPE 3 DIME BLANKING DIE REBUILD KIT FOR ODD-03, OBERG DIE #102266-2 WITH THE NOTED EXCEPTION ON THE QUOTE OF NO-SLUG RETENTION.
    contract · Last action 2024-04-03
    $47,985
  • Department of the Treasury
    REPLACES PR-99391 OBERG
    contract · Last action 2021-04-20
    $47,865
  • Department of the Treasury
    COIN GAUGES
    contract · Last action 2009-09-01
    $47,600
  • Department of the Treasury
    REPAIR KIT 25C
    contract · Last action 2025-01-16
    $45,575
  • Department of the Treasury
    OBERG MACHINE PARTS
    contract · Last action 2016-06-02
    $45,135
  • Department of the Treasury
    MAXIMO RESTOCK SUPPLY ITEM
    contract · Last action 2020-12-10
    $44,900
  • Department of the Treasury
    *** ON DEMAND *** REBUILD KIT, QUARTER DIE, TYPE 4, T-RBD-KIT-25
    contract · Last action 2025-07-23
    $44,230
  • Department of the Treasury
    REPLACMENT REQ FOR #69063 - SIEMENS MASTER DRIVE ASSEMBLIES
    contract · Last action 2012-11-05
    $43,568
  • Department of the Treasury
    GENERATED BY REORDER 11/29/10 4:14 PM.
    contract · Last action 2011-02-23
    $42,340
  • Department of the Treasury
    REPLACES PR-100309 FOR OBERG DIES
    contract · Last action 2021-06-30
    $41,950
  • Department of the Treasury
    MAXIMO SUPPLY PARTS - DIE REBUILD KIT
    contract · Last action 2021-08-18
    $41,500
  • Department of the Treasury
    MAXIMO NEW STOCK ITEMS
    contract · Last action 2021-07-06
    $41,044
  • Department of the Treasury
    FOR OBERG DIES
    contract · Last action 2019-06-04
    $38,775
  • Department of the Treasury
    *** ON DEMAND *** REBUILD KIT, NICKEL DIE, TYPE 5, OBERG #T-5-RBD-KIT-05
    contract · Last action 2019-12-05
    $38,500
  • Department of the Treasury
    FOR SERIAL #149575
    contract · Last action 2019-08-15
    $38,500
  • Department of the Treasury
    DESIGN CONCEPT PN #BCD-1, PROTOTYPE COIN COUNTER CHUTE PN #BCCP-1 (BOC: 260401)
    contract · Last action 2019-11-05
    $36,461
  • Department of the Treasury
    ***ON DEMAND***ESTABLISH NEW STOCK ITEM
    contract · Last action 2020-02-19
    $36,400
  • Department of the Treasury
    OBERG 10C REPAIR KIT
    contract · Last action 2016-07-21
    $34,500
  • Department of the Treasury
    KIT, REPAIR, DIE, OBERG, 25C TYPE 2
    contract · Last action 2016-10-20
    $32,375

Federal contract dollars to this establishment. Primary NAICS: 333993 - PACKAGING MACHINERY MANUFACTURING. Last action: 2026-03-18. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.

Inspection history

DateTriggerViolationsSeriousPenalty
2018-10-01Planned0—$0
2014-01-22Planned65$4,974
2013-11-06Planned0—$0
2007-02-12Planned0—$0
2006-05-25Planned0—$0
2002-04-11Programmed Other0—$0
1998-06-08Planned52$675
1992-05-20Planned75$2,064

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Part of a larger organization

OBERG INDUSTRIES is one of 2 establishments rolled up under the parent organization Oberg Industries LLC.

Federal enforcement records on this page represent activity at this specific establishment only. The full enforcement footprint of Oberg Industries LLC across all 2 of its tracked locations is viewable on the parent profile.

Other employers in this industry and state

Other employers in special die and tool, die set, jig, and fixture manufacturing within PA, ordered by federal enforcement volume:

Other locations under this parent

Other establishments operated by Oberg Industries LLC, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on OBERG INDUSTRIES from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code. This establishment resolves to the parent rollup Oberg Industries LLC, which operates 2 establishments in our dataset.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is OBERG INDUSTRIES's OSHA violation history?
OBERG INDUSTRIES has 8 OSHA inspections on record with 18 violations and $7,712.5 in total penalties.
How does OBERG INDUSTRIES's safety record compare to its industry?
OBERG INDUSTRIES operates in the special die and tool, die set, jig, and fixture manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.8. OBERG INDUSTRIES's self-reported DART rate is 1.2 compared to an industry average of 1.4.