Establishment profile
NELSON MACHINE & WELDING
1206 PARKVIEW ROAD, GREEN BAY, WI, 54304
332710 — Machine Shops
Summary
NELSON MACHINE & WELDING has accumulated 16 OSHA violations across 2 inspections over 21 years of recorded history, with $4,515 in total assessed penalties.
The establishment sits in the 88th percentile for violations within its industry-state peer group of 383 employers. Inspection frequency runs at the 52nd percentile. The most recent enforcement activity was recorded 16 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
NELSON MACHINE & WELDING appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 15 distinct standards shown · 16 citations in this view · $4,515 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A01 | 2 | 2 | $1,260 | Jan 2005 | Jun 2010 |
| 29 CFR 1910.0213 D01 | 1 | 1 | $875 | Jun 2010 | Jun 2010 |
| 29 CFR 1910.0219 D01 | 1 | 1 | $700 | Jun 2010 | Jun 2010 |
| 29 CFR 1910.0178 L04 III | 1 | 1 | $525 | Jun 2010 | Jun 2010 |
| 29 CFR 1910.0212 A03 II | 1 | 1 | $420 | Jan 2005 | Jan 2005 |
| 29 CFR 1910.0147 C01 | 1 | 1 | $420 | Jan 2005 | Jan 2005 |
| 29 CFR 1910.1200 E01 | 1 | 1 | $315 | Jan 2005 | Jan 2005 |
| 29 CFR 1904.0032 A02 | 1 | 1 | — | Jun 2010 | Jun 2010 |
| 29 CFR 1910.0215 A04 | 1 | 1 | — | Jun 2010 | Jun 2010 |
| 29 CFR 1910.0215 B09 | 1 | 1 | — | Jun 2010 | Jun 2010 |
| 29 CFR 1910.0147 C06 I | 1 | 1 | — | Jun 2010 | Jun 2010 |
| 29 CFR 1910.0219 E01 I | 1 | 1 | — | Jun 2010 | Jun 2010 |
| 29 CFR 1910.0178 L06 | 1 | 1 | — | Jun 2010 | Jun 2010 |
| 29 CFR 1910.0305 G02 III | 1 | 1 | — | Jun 2010 | Jun 2010 |
| 29 CFR 1910.0219 E03 I | 1 | 1 | — | Jun 2010 | Jun 2010 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3327 within WI. Peer group: 383 employers. This establishment has 16 OSHA violations; peer median is 4.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 48 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for NELSON MACHINE & WELDING. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 16+ years. Most recent activity: 16 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for NELSON MACHINE & WELDING. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for NELSON MACHINE & WELDING. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for NELSON MACHINE & WELDING. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for NELSON MACHINE & WELDING. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for NELSON MACHINE & WELDING. Verify directly with Environmental Protection Agency →
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2010-06-24 | Planned | 12 | 9 | $2,625 | |
| 2005-01-05 | Planned | 4 | 4 | $1,890 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within WI, ordered by federal enforcement volume:
- HYPRO INC.WATERFORD — 2 federal enforcement records
- TED GROB CORPORATIONGRAFTON — 2 federal enforcement records
- MILLENNIUM TECHNOLOGIES, LLCPLYMOUTH — 2 federal enforcement records
- DYNATECT MANUFACTURING, INC.NEW BERLIN — 2 federal enforcement records
- V & L TOOL, LLCWAUKESHA — 2 federal enforcement records
- MILLER MACHINED PRODUCTS, INC.ENDEAVOR — 2 federal enforcement records
- INNOVATIVE MACHINING LLCNEENAH — 2 federal enforcement records
- HYPRO INCORPORATEDBERLIN — 2 federal enforcement records
- SUSSEK MACHINE COMPANY, LLCWATERLOO — 2 federal enforcement records
- REXNORD INCMilwaukee — 2 federal enforcement records
Related searches
- Machine ShopsAll employers in this industry
- Employers in WIState-wide enforcement data
- Machine Shops in WIIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on NELSON MACHINE & WELDING from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is NELSON MACHINE & WELDING's OSHA violation history?
- NELSON MACHINE & WELDING has 2 OSHA inspections on record with 16 violations and $4,515 in total penalties.
- How does NELSON MACHINE & WELDING's safety record compare to its industry?
- NELSON MACHINE & WELDING operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7. NELSON MACHINE & WELDING's self-reported DART rate is 1.9 compared to an industry average of 1.5.