Summary
N C MACHINERY has no OSHA inspection history on file. Federal records covering wage, environmental, labor relations, and other agencies are noted below where present.
The most recent federal enforcement activity was recorded 0 days ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
N C MACHINERY appears in MSHA mine safety record only. No matching records were found in OSHA workplace safety, WHD wage enforcement, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
No OSHA inspections, citations, or accidents on file for N C MACHINERY. Verify directly with Occupational Safety and Health Administration →
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for N C MACHINERY. Verify directly with OSHA Injury Tracking Application →
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for N C MACHINERY. Verify directly with Occupational Safety and Health Administration →
Activity timeline
Most recent federal enforcement activity recorded 0 days ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for N C MACHINERY. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
Company-level in WA — for N C MACHINERY, not this location alone
Mine Safety & Health Administration — citations issued at mining operations. MSHA records cases at the company/regional level (no worksite address), so these are matched by company name and state and may span other N C MACHINERY operations in the same state.
MSHA citations
Mine Safety and Health Administration citations. S&S (significant and substantial) marks violations that could reasonably contribute to a serious injury. Negligence rating is MSHA’s operator-culpability assessment (none, low, moderate, high, or reckless disregard). Proposed = assessed at issuance; Paid = post-settlement / appeal. 13 citations · 1S&S · 13 contractor · $1,427 proposed / $1,427 paid.
| Citation | Mine | Date | Section | S&S | Negligence | Proposed | Paid |
|---|---|---|---|---|---|---|---|
| 5107503 | Tenino Thurston, WA contractor: N C Machinery Co | Jan 2026 | — | No | ModNegligence | $168 | $168 |
| 9688282 | Quincy WA Mine Grant, WA contractor: N C Machinery Co | Apr 2024 | — | No | LowNegligence | $164 | $164 |
| 5107501 | Tenino Thurston, WA contractor: N C Machinery Co | Jan 2026 | — | No | ModNegligence | $151 | $151 |
| 5107500 | Tenino Thurston, WA contractor: N C Machinery Co | Jan 2026 | — | No | ModNegligence | $151 | $151 |
| 8881795 | Stilly Sand and Gravel Snohomish, WA contractor: N C Machinery Co | Jun 2016 | — | No | ModNegligence | $114 | $114 |
| 8786244 | Dupont Pit Pierce, WA contractor: N C Machinery Co | Mar 2015 | — | No | ModNegligence | $100 | $100 |
| 8611822 | Kapowsin Quarry Pierce, WA contractor: N C Machinery Co | May 2014 | — | No | ModNegligence | $100 | $100 |
| 8611821 | Kapowsin Quarry Pierce, WA contractor: N C Machinery Co | May 2014 | — | No | ModNegligence | $100 | $100 |
| 7291539 | Centralia Coal Mine Lewis, WA contractor: N C Machinery Co | Aug 2007 | — | No | ModNegligence | $100 | $100 |
| 7616778 | Centralia Coal Mine Lewis, WA contractor: N C Machinery Co | Nov 2004 | — | Yes | ModNegligence | $99 | $99 |
| 7606451 | Centralia Coal Mine Lewis, WA contractor: N C Machinery Co | Mar 2006 | — | No | ModNegligence | $60 | $60 |
| 7606449 | Centralia Coal Mine Lewis, WA contractor: N C Machinery Co | Mar 2006 | — | No | ModNegligence | $60 | $60 |
| 7282160 | Centralia Coal Mine Lewis, WA contractor: N C Machinery Co | May 2005 | — | No | ModNegligence | $60 | $60 |
Source: MSHA citation database. “Contractor” annotations indicate the cited party was on-site at the mine but not the mine’s operator -- responsibility attaches to the contractor LLC, not the mine’s owner. Section codes reference 30 CFR (the Mine Safety and Health regulations).
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for N C MACHINERY. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for N C MACHINERY. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for N C MACHINERY. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
N C MACHINERY 2020 FREEWAY DR · MOUNT VERNON, WA, 98273 | RCRA | No Violation Identified | 0 | 0 | — | — | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for N C MACHINERY. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
Consolidated across all USAspending recipient entities under this corporate parent — not attributable to this single location.
- Department of DefenseTRACKED DOZER 08D00338 REPLACEMENT ENGINEcontract · Last action 2024-09-06$77,083
- Department of DefenseTHIS IS FOR THE PURCHASE OF A CAT ENGINE PART NUMBER 20R9439 AND THE SUBSEQUENT REPLACEMENT OF THE EXISTING ENGINE FOR THE NEW ONE.contract · Last action 2023-01-30$53,933
- Department of Homeland SecurityNEW CYLINDER HEADS AND ALL GASKETS *** BACKLOG ITEM ***contract · Last action 2010-09-29$15,056
- Department of Homeland SecurityPARTS FOR TOP END OVERHAUL PMS M-H-2176contract · Last action 2010-08-17$9,413
Federal contract dollars to this establishment. Primary NAICS: 811310 - COMMERCIAL AND INDUSTRIAL MACHINERY AND EQUIPMENT (EXCEPT AUTOMOTIVE AND ELECTRONIC) REPAIR AND MAINTENANCE. Last action: 2024-09-06. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
In the news
Related searches
- Employers in WAState-wide enforcement data
About this data
This profile aggregates federal enforcement records on N C MACHINERY from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is N C MACHINERY's OSHA violation history?
- N C MACHINERY has no OSHA inspections on record.