What is MICROTECH MACHINE COMPANY, INC.'s OSHA violation history?

MICROTECH MACHINE COMPANY, INC. has 2 OSHA inspections on record with 9 violations and $3,900 in total penalties.

How does MICROTECH MACHINE COMPANY, INC.'s safety record compare to its industry?

MICROTECH MACHINE COMPANY, INC. operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7.

Establishment profile

MICROTECH MACHINE COMPANY, INC.

222 CAMP MCDONALD RD., WHEELING, IL, 60090
332710 — Machine Shops

Download as PDF →

OSHA inspections

over 23 years

Violations

$3,900 in penalties

Penalties

$3,900

$433 avg

Accident investigations on record

2 National Emphasis Program inspections

Summary

MICROTECH MACHINE COMPANY, INC. has accumulated 9 OSHA violations across 2 inspections over 23 years of recorded history, with $3,900 in total assessed penalties.

The establishment sits in the 74th percentile for violations within its industry-state peer group of 639 employers. Inspection frequency runs at the 53rd percentile. The most recent enforcement activity was recorded 14 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

MICROTECH MACHINE COMPANY, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections

0.1 / yr · last 23 yrs

Violations

0.4 / yr

Penalties

$3,900

$433 avg / violation

100% serious0% other

Inspection trigger · complaint

1 of 2

Inspection trigger · planned

1 of 2

100% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 9 distinct standards shown · 9 citations in this view · $3,900 in penalties.

CFR section	Citations	Inspections	Total penalty	First cited	Last cited
29 CFR 1910.1200 E01	1	1	$1,200	Feb 2012	Feb 2012
29 CFR 1910.0212 A01	1	1	$750	Mar 2003	Mar 2003
5A0001	1	1	$750	Mar 2003	Mar 2003
29 CFR 1910.0147 C01	1	1	$375	Mar 2003	Mar 2003
29 CFR 1910.0219 D01	1	1	$300	Mar 2003	Mar 2003
29 CFR 1910.0215 B09	1	1	$300	Mar 2003	Mar 2003
29 CFR 1910.0242 B	1	1	$225	Mar 2003	Mar 2003
29 CFR 1910.1200 H03 II	1	1	—	Feb 2012	Feb 2012
29 CFR 1910.0219 E03 I	1	1	—	Mar 2003	Mar 2003

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

74th

Above average violations in NAICS 3327 within IL. Peer group: 639 employers. This establishment has 9 OSHA violations; peer median is 3.

Fewer violationsMore violations

Penalty percentile

65th

peer median: $1,800

Inspection frequency

53rd

peer median: 1

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for MICROTECH MACHINE COMPANY, INC.. Verify directly with OSHA Injury Tracking Application →

Industry benchmark

Industry avg TRIR

2.7

BLS SOII 2024

Industry avg DART

1.5

BLS SOII 2024

Self-reported TRIR

—

Not in OSHA ITA

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned

Complaint

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for MICROTECH MACHINE COMPANY, INC.. Verify directly with Occupational Safety and Health Administration →

Activity timeline

Data refreshed

Weekly

First OSHA inspection

—

Most recent activity

14 years ago

No federal enforcement activity has been recorded against this establishment in 14+ years. Most recent activity: 14 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for MICROTECH MACHINE COMPANY, INC.. Verify directly with Wage and Hour Division →

Mine safety (MSHA)

No MSHA mine safety violations on file for MICROTECH MACHINE COMPANY, INC.. Verify directly with Mine Safety and Health Administration →

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for MICROTECH MACHINE COMPANY, INC.. Verify directly with National Labor Relations Board →

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for MICROTECH MACHINE COMPANY, INC.. Verify directly with Office of Foreign Labor Certification →

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for MICROTECH MACHINE COMPANY, INC.. Verify directly with Environmental Protection Agency →

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for MICROTECH MACHINE COMPANY, INC.. Verify directly with UVA Corporate Prosecution Registry →

Federal contracts

This location

Obligated (5-yr)

$612K

Obligated (all-time)

$3.1M

Awards

134

Top agency

National Aeronautics and Space Administration

$3.1M

Top agencies by obligation (this location)

National Aeronautics and Space Administration$3.1M

Department of Defense$28K

Largest awards (top 50 of 134)

National Aeronautics and Space Administration
SB SET-ASIDE, 42 OFFERS.BPA VENDORS SHALL PROVIDE FABRICATION SERVICES AT VENDORS SITE&SUPPLIES TO GSFC IN THEIR RESPECTIVE AREAS OF EXPERTISE FOR THE DEVELOPMENT OF INSTRUMENTS SPACE FLIGHT&NON-SPACEFLIGHT HARDWARE INTERCHANGEABLE PIECE PARTS. .
contract · Last action 2025-04-15
$477,488
National Aeronautics and Space Administration
IGF::OT::IGF SMALL BUSINESS SET-ASIDE, 84 OFFERS PLACE OF PERFORMANCE: VENDOR SITE FABRICATION OF COMMERCIAL SERVICES AND SUPPLIES FOR GODDARD SPACE FLIGHT CENTER THE ADVANCED MANUFACTURING BRANCH (AMB) IS RESPONSIBLE FOR MAINTAINING A COMPLETE MANUFACTURING FACILITY TO MEET THE CENTER'S RESEARCH AND DEVELOPMENT REQUIREMENTS AND ASSIST IN THE FABRICATION OF HARDWARE REQUIREMENTS FROM MULTIPLE NASA PROJECT MISSIONS. THIS FACILITY INCLUDES CONVENTIONAL MACHINING EQUIPMENT, NUMERICALLY CONTROLLED (NC) MACHINING CENTERS, SHEET METAL AND WELDING FABRICATION EQUIPMENT AND REMOTELY LOCATED STAFF SHOPS. VENDORS SHALL PROVIDE FABRICATION SERVICES AND SUPPLIES TO THE MANUFACTURING ENGINEERING GROUP IN THEIR RESPECTIVE AREAS OF EXPERTISE FOR THE DEVELOPMENT OF INSTRUMENTS AND SPACE FLIGHT AND NON-SPACEFLIGHT HARDWARE INTERCHANGEABLE PIECE PARTS. VENDORS WILL MANUFACTURE PER ENGINEERING DRAWINGS WITH AEROSPACE INDUSTRY TOLERANCES AND PROVIDE FABRICATION CAPABILITIES IN ACCORDANCE WITH THE STATEMENT OF WORK. TO FABRICATE CLOSE TOLERANCE AEROSPACE INSTRUMENTS AND SPACE FLIGHT GRADE PARTS, IN VARIOUS MATERIALS SUCH AS (BUT NOT LIMITED TO) ALUMINUM, TITANIUM, HIGH STRENGTH STEEL AND NICKEL ALLOY, ENGINEERING PLASTICS, AND COMPOSITES BASED ON INDUSTRY ENGINEERING DRAWINGS, PROVIDED IN ELECTRONIC FORMAT, TO INDUSTRY STANDARD TOLERANCES AND SPECIFICATIONS. PARTS MAY RANGE IN COMPLEXITY FROM VERY SIMPLE TO VERY COMPLEX, WITH QUANTITIES. EACH DISCIPLINE IS FURTHER DIVIDED INTO SUBCATEGORIES BASED ON THE EXPECTED SIZE OF FABRICATED PARTS. THE FABRICATIONS OF PRODUCTS OR SERVICES PROPOSED AS "SPACEFLIGHT" ARE REQUIRED TO BE, ISO 900I OR AS9100 COMPLAINT, ITEMS PROPOSED AS "NON-FLIGHT" WILL NOT REQUIRE RESPONDENTS TO BE ISO 9001 OR AS9100 COMPLIANT. OFFERS SHALL INDICATE IF THEY ARE ISO 9001 OR AS9100 COMPLAINT AND PROVIDE SUPPORTING DOCUMENTATION.
contract · Last action 2020-05-08
$469,530
National Aeronautics and Space Administration
FABRICATION OF PARTS TO BE USED FOR TESTING IN THE 1X1 WIND TUNNEL AT THE NASA GLENN RESEARCH CENTER
contract · Last action 2020-04-23
$109,325
National Aeronautics and Space Administration
SPACEX ERECTOR
contract · Last action 2017-06-22
$97,750
National Aeronautics and Space Administration
HEAT SHIELD PASS THRU
contract · Last action 2017-08-31
$78,230
National Aeronautics and Space Administration
IGF::OT::IGF SMALL BUSINESS SET-ASIDE, 84 OFFERS PLACE OF PERFORMANCE: VENDOR SITE FABRICATION OF COMMERCIAL SERVICES AND SUPPLIES FOR GODDARD SPACE FLIGHT CENTER THE ADVANCED MANUFACTURING BRANCH (AMB) IS RESPONSIBLE FOR MAINTAINING A COMPLETE MANUFACTURING FACILITY TO MEET THE CENTER'S RESEARCH AND DEVELOPMENT REQUIREMENTS AND ASSIST IN THE FABRICATION OF HARDWARE REQUIREMENTS FROM MULTIPLE NASA PROJECT MISSIONS. THIS FACILITY INCLUDES CONVENTIONAL MACHINING EQUIPMENT, NUMERICALLY CONTROLLED (NC) MACHINING CENTERS, SHEET METAL AND WELDING FABRICATION EQUIPMENT AND REMOTELY LOCATED STAFF SHOPS. VENDORS SHALL PROVIDE FABRICATION SERVICES AND SUPPLIES TO THE MANUFACTURING ENGINEERING GROUP IN THEIR RESPECTIVE AREAS OF EXPERTISE FOR THE DEVELOPMENT OF INSTRUMENTS AND SPACE FLIGHT AND NON-SPACEFLIGHT HARDWARE INTERCHANGEABLE PIECE PARTS. VENDORS WILL MANUFACTURE PER ENGINEERING DRAWINGS WITH AEROSPACE INDUSTRY TOLERANCES AND PROVIDE FABRICATION CAPABILITIES IN ACCORDANCE WITH THE STATEMENT OF WORK. TO FABRICATE CLOSE TOLERANCE AEROSPACE INSTRUMENTS AND SPACE FLIGHT GRADE PARTS, IN VARIOUS MATERIALS SUCH AS (BUT NOT LIMITED TO) ALUMINUM, TITANIUM, HIGH STRENGTH STEEL AND NICKEL ALLOY, ENGINEERING PLASTICS, AND COMPOSITES BASED ON INDUSTRY ENGINEERING DRAWINGS, PROVIDED IN ELECTRONIC FORMAT, TO INDUSTRY STANDARD TOLERANCES AND SPECIFICATIONS. PARTS MAY RANGE IN COMPLEXITY FROM VERY SIMPLE TO VERY COMPLEX, WITH QUANTITIES. EACH DISCIPLINE IS FURTHER DIVIDED INTO SUBCATEGORIES BASED ON THE EXPECTED SIZE OF FABRICATED PARTS. THE FABRICATIONS OF PRODUCTS OR SERVICES PROPOSED AS "SPACEFLIGHT" ARE REQUIRED TO BE, ISO 900I OR AS9100 COMPLAINT, ITEMS PROPOSED AS "NON-FLIGHT" WILL NOT REQUIRE RESPONDENTS TO BE ISO 9001 OR AS9100 COMPLIANT. OFFERS SHALL INDICATE IF THEY ARE ISO 9001 OR AS9100 COMPLAINT AND PROVIDE SUPPORTING DOCUMENTATION.
contract · Last action 2020-09-01
$70,768
National Aeronautics and Space Administration
CLIO NEW CHAMBER PARTS
contract · Last action 2022-09-06
$56,926
National Aeronautics and Space Administration
FABRICATION OF FLIGHT HARDWARE PARTS FOR USE IN TESTING AT THE NASA GLENN RESEARCH CENTER
contract · Last action 2020-01-24
$56,087
National Aeronautics and Space Administration
FABRICATION OF COMPONENTS FOR DRPS TESTBED PROJECT AND NASA GLENN RESEARCH CENTER.
contract · Last action 2022-01-04
$53,910
National Aeronautics and Space Administration
IGF::OT::IGF VFEN HARD HARDWARE
contract · Last action 2017-05-18
$53,860
National Aeronautics and Space Administration
INTERFACE BRACKETS COMMERCIAL HARDWARE
contract · Last action 2017-03-30
$52,710
National Aeronautics and Space Administration
IGF::OT::IGF HIGH PRESSURE TEST CELL, PIVOT ASSEMBLY, HARD MOUNT RAIL, SHEAR PIN, HARD MOUNT PLATE.
contract · Last action 2016-12-19
$51,928
National Aeronautics and Space Administration
FABRICATION OF KNUDSEN CELL TO BE USED IN TESTING AT NASA GLENN RESEARCH.
contract · Last action 2021-08-10
$50,240
National Aeronautics and Space Administration
IGF::OT::IGF
contract · Last action 2018-05-23
$48,990
National Aeronautics and Space Administration
E-FIELD LASER PROBE KIT.
contract · Last action 2011-03-28
$43,498
National Aeronautics and Space Administration
CHASSIS ELECTRONICS ENCLOSURE
contract · Last action 2017-05-15
$41,000
National Aeronautics and Space Administration
FABRICATION OF SE-2 MACHINE PARTS ASSEMBLY TO BE USED IN TESTING AT NASA GLENN RESEARCH
contract · Last action 2021-09-02
$38,600
National Aeronautics and Space Administration
WO 80990 PARACHUTE EXTRACTION CLEVIS AND BLOCKS
contract · Last action 2019-11-19
$34,239
National Aeronautics and Space Administration
LOW-EARTH ORBIT FLIGHT TEST OF AN INFLATABLE DECELERATOR (LOFTID) ADVANCED FILE TRANSFER (AFT) SEGMENT MAIN PARACHUTE HARNESS LEG INTERFACE COMPONENTS
contract · Last action 2021-05-27
$33,939
National Aeronautics and Space Administration
OCTAGONAL TEST SECTION
contract · Last action 2018-07-30
$33,260
National Aeronautics and Space Administration
HERMETIC CONNECTOR 38 PIN HERMETIC CONNECTOR 8 PIN HERMETIC CONNECTOR 128 PIN
contract · Last action 2011-03-03
$32,039
National Aeronautics and Space Administration
LOW-EARTH ORBIT FLIGHT TEST OF AN INFLATABLE DECELERATOR (LOFTID) TEST STANCHIONS
contract · Last action 2021-07-06
$30,929
National Aeronautics and Space Administration
LOW-EARTH ORBIT FLIGHT TEST OF AN INFLATABLE DECELERATOR (LOFTID)TEST STANCHIONS
contract · Last action 2021-05-03
$30,929
National Aeronautics and Space Administration
ELECTABLE DATA RECORDS
contract · Last action 2020-02-14
$29,484
National Aeronautics and Space Administration
AXISYMMETRIC AFTERBODY
contract · Last action 2017-04-12
$29,275
National Aeronautics and Space Administration
LOAD FRAME TEST GRIPS
contract · Last action 2014-09-18
$29,100
National Aeronautics and Space Administration
LONG LOW-EARTH FLIGHT TEST OF AN INFLATABLE DECELERATOR PROGRAM RECOVERY SHIP STAND ASSEMBLY.
contract · Last action 2022-08-17
$28,170
National Aeronautics and Space Administration
DEPLOYABLE COMPOSITE BOOM MINI SAIL COMPONENTS
contract · Last action 2020-09-18
$24,176
National Aeronautics and Space Administration
FABRICATION HIGH TEMPERATURE WEAR PLATES NEEDED FOR TESTING AT THE NASA GLENN RESEARCH CENTER
contract · Last action 2019-06-03
$23,870
National Aeronautics and Space Administration
FORWARD SEGMENT ASSY COMPONENTS
contract · Last action 2020-02-19
$23,350
National Aeronautics and Space Administration
HARTMANN NOISE GENERATOR ASSEMBLY
contract · Last action 2015-04-27
$22,645
National Aeronautics and Space Administration
PARACHUTE EXTRACTION MOLD LINE ADAPTERS
contract · Last action 2019-11-19
$21,778
Department of Defense
4521365706!BOA
contract · Last action 2012-09-26
$21,750
National Aeronautics and Space Administration
ACS 3 HUB ASSEMBLY
contract · Last action 2020-04-23
$20,790
National Aeronautics and Space Administration
HATCH COVER WINDOW ASSEMBLY
contract · Last action 2017-12-20
$19,982
National Aeronautics and Space Administration
ACS3 DEPLOYER PLATES FOR FLIGHT EXPERIMENT
contract · Last action 2020-08-28
$19,218
National Aeronautics and Space Administration
FABRICATION OF FARADAY PROBE PARTS FOR USE IN RESEARCH AT THE NASA GLENN RESEARCH CENTER
contract · Last action 2019-05-16
$18,600
National Aeronautics and Space Administration
ENVIRONMENTAL CONTROL SYSTEMS (ECS) DUCT ASSEMBLY COMPONENTS
contract · Last action 2018-01-16
$17,662
National Aeronautics and Space Administration
HATCH SPACERS
contract · Last action 2017-04-17
$17,600
National Aeronautics and Space Administration
ELEVATOR SHAFT & COLLAR ASSEMBLY
contract · Last action 2021-05-14
$16,491
National Aeronautics and Space Administration
NICKLE TITANIUM ROD FABRICATION
contract · Last action 2019-07-31
$15,696
National Aeronautics and Space Administration
CONSTANT FORCE SPRING ASSEMBLY
contract · Last action 2021-03-16
$15,300
National Aeronautics and Space Administration
PLUME IMPINGEMENT PANEL TEST HARDWARE
contract · Last action 2011-12-08
$15,180
National Aeronautics and Space Administration
FABRICATION OF CLIPS TO BE USED IN TTOS TESTING AT THE NASA GLENN RESEARCH CENTER
contract · Last action 2020-01-06
$15,128
National Aeronautics and Space Administration
ACS3 TAPE SPOOL, SUPPORTS AND BRACKET
contract · Last action 2020-08-13
$14,684
National Aeronautics and Space Administration
FABRICATION OF THE FIRST SET OF PARTS NEEDED FOR THE TFCDVE PROJECT AT THE NASA GLENN RESEARCH CENTER
contract · Last action 2021-04-21
$14,551
National Aeronautics and Space Administration
FABRICATION OF INCONEL ROD HARDWARE TO BE USED AT NASA GLENN RESEARCH.
contract · Last action 2020-04-17
$14,480
National Aeronautics and Space Administration
LOWER SOCKET PLATES, LOWER BALL RETAINERS, UPPER SOCKET PLATES AND UPPER SOCKET PLATES OPPOSITE HAND
contract · Last action 2014-02-18
$14,413
National Aeronautics and Space Administration
SHIVER INSTRUMENTATION STRUCTURE
contract · Last action 2018-09-05
$14,254
National Aeronautics and Space Administration
PLATFORM BALLAST WEIGHTS AND PLATES
contract · Last action 2016-09-01
$14,248

Federal contract dollars to this establishment. Primary NAICS: 332999 - ALL OTHER MISCELLANEOUS FABRICATED METAL PRODUCT MANUFACTURING. Last action: 2025-06-10. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.

Inspection history

Date	Trigger	Violations	Serious	Penalty
2011-11-09	Complaint	2	2	$1,200
2003-03-06	Planned	7	7	$2,700

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in machine shops within IL, ordered by federal enforcement volume:

MECHANICAL DEVICES COMPANYBLOOMINGTON — 3 federal enforcement records
RIVERSTONE GROUP, INC.ROCK ISLAND — 3 federal enforcement records
AMTEC PRECISION PRODUCTS, INC.ELGIN — 3 federal enforcement records
ALPHA MACHINE CORPORATIONTINLEY PARK — 2 federal enforcement records
A.M. PRECISION MACHINING, INC.ELK GROVE VILLAGE — 2 federal enforcement records
ACCURATE METAL FABRICATING, INC.CICERO — 2 federal enforcement records
ABRASIVE-FORM, LLCBLOOMINGDALE — 2 federal enforcement records
SERRA LASER PRECISION, LLCLIBERTYVILLE — 2 federal enforcement records
MIDSTATE MANUFACTURING COMPANYGALESBURG — 2 federal enforcement records
FASTENAL COMPANYLOVES PARK — 2 federal enforcement records