Skip to main content

Establishment profile

MICRON POWDER SYSTEMS

10 CHATHAM RD., SUMMIT, NJ, 07901

Download as PDF →

OSHA inspections
2
over 35 years
Violations
22
$11,820 in penalties
Penalties
$11,820
$537 avg

Summary

MICRON POWDER SYSTEMS has accumulated 22 OSHA violations across 2 inspections over 35 years of recorded history, with $11,820 in total assessed penalties.

The establishment sits in the 98th percentile for violations within its industry-state peer group of 69,404 employers. Inspection frequency runs at the 73rd percentile. The most recent enforcement activity was recorded 33 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

MICRON POWDER SYSTEMS appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls.

OSHA workplace safety

Inspections
2
0.1 / yr · last 35 yrs
Violations
22
0.6 / yr
Penalties
$11,820
$537 avg / violation
73% serious27% other
Inspection trigger · complaint
1 of 2
Inspection trigger · referral
1 of 2

100% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 20 citations in this view · $11,820 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.1200 E01 II11$1,500May 1993May 1993
29 CFR 1910.1200 G0811$1,500May 1993May 1993
29 CFR 1910.1200 H11$1,200May 1993May 1993
29 CFR 1910.0106 E02 IVD11$1,000May 1993May 1993
29 CFR 1910.0095 C0111$950May 1993May 1993
29 CFR 1910.0215 A0411$950May 1993May 1993
29 CFR 1910.0157 G0211$750May 1993May 1993
29 CFR 1910.0134 F0111$630Jan 1991Jan 1991
29 CFR 1910.1030 C01 I11$600May 1993May 1993
29 CFR 1910.1030 F02 I11$600May 1993May 1993
29 CFR 1910.1030 G02 I11$600May 1993May 1993
29 CFR 1910.0213 H0111$540Jan 1991Jan 1991
29 CFR 1910.0147 E0311$200May 1993May 1993
29 CFR 1910.0037 Q0111$200May 1993May 1993
29 CFR 1910.0147 C06 II11$200May 1993May 1993
29 CFR 1910.0147 C04 II11$200May 1993May 1993
29 CFR 1910.0333 B02 I11$200May 1993May 1993
29 CFR 1910.1200 H02 II11May 1993May 1993
29 CFR 1910.0215 B0911May 1993May 1993
29 CFR 1910.1200 F05 I11May 1993May 1993

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

98th

Worse on violations than nearly every other employer. Peer group: 69,404 employers. This establishment has 22 OSHA violations; peer median is 1.

Fewer violationsMore violations
Penalty percentile
99th
peer median: $0
Inspection frequency
73rd
peer median: 1

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for MICRON POWDER SYSTEMS. Verify directly with OSHA Injury Tracking Application

Inspection breakdown

Complaint
1
Referral
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for MICRON POWDER SYSTEMS. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
33 years ago

No federal enforcement activity has been recorded against this establishment in 33+ years. Most recent activity: 33 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for MICRON POWDER SYSTEMS. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for MICRON POWDER SYSTEMS. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for MICRON POWDER SYSTEMS. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for MICRON POWDER SYSTEMS. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for MICRON POWDER SYSTEMS. Verify directly with Environmental Protection Agency

Motor carrier safety (FMCSA)

DOT number
31608
Operation
A

Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.

Inspection history

DateTriggerViolationsSeriousPenalty
1993-02-11Referral1914$10,650
1990-12-03Complaint32$1,170

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Related searches

About this data

This profile aggregates federal enforcement records on MICRON POWDER SYSTEMS from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is MICRON POWDER SYSTEMS's OSHA violation history?
MICRON POWDER SYSTEMS has 2 OSHA inspections on record with 22 violations and $11,820 in total penalties.