Establishment profile
MICRO TOOL COMPANY, INC.
284 BRODHEAD ROAD, BETHLEHEM, PA, 18017
332710 — Machine Shops
EIN 232679747
Summary
MICRO TOOL COMPANY, INC. has accumulated 10 OSHA violations across 5 inspections over 22 years of recorded history, with $3,037 in total assessed penalties.
The establishment sits in the 79th percentile for violations within its industry-state peer group of 778 employers. Inspection frequency runs at the 88th percentile. The most recent enforcement activity was recorded 1 year ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
MICRO TOOL COMPANY, INC. appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
80% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 10 distinct standards shown · 10 citations in this view · $3,037 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A01 | 1 | 1 | $2,137 | Feb 2025 | Feb 2025 |
| 29 CFR 1910.0219 D01 | 1 | 1 | $450 | May 2004 | May 2004 |
| 29 CFR 1910.0213 B03 | 1 | 1 | $450 | May 2004 | May 2004 |
| 29 CFR 1910.1200 F06 | 1 | 1 | — | Jun 2014 | Jun 2014 |
| 29 CFR 1910.0147 C05 II B | 1 | 1 | — | Jun 2014 | Jun 2014 |
| 29 CFR 1910.0303 B02 | 1 | 1 | — | Apr 2011 | Apr 2011 |
| 29 CFR 1910.0179 J02 III | 1 | 1 | — | May 2004 | May 2004 |
| 29 CFR 1910.0219 E01 I | 1 | 1 | — | May 2004 | May 2004 |
| 29 CFR 1910.0219 E03 I | 1 | 1 | — | May 2004 | May 2004 |
| 29 CFR 1910.0179 J02 IV | 1 | 1 | — | May 2004 | May 2004 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Above average violations in NAICS 3327 within PA. Peer group: 778 employers. This establishment has 10 OSHA violations; peer median is 3.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 56 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for MICRO TOOL COMPANY, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
Most recent federal enforcement activity recorded 1 year ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for MICRO TOOL COMPANY, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for MICRO TOOL COMPANY, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for MICRO TOOL COMPANY, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for MICRO TOOL COMPANY, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for MICRO TOOL COMPANY, INC.. Verify directly with Environmental Protection Agency →
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for MICRO TOOL COMPANY, INC.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2025-01-07 | Planned | 1 | 1 | $2,137 | |
| 2014-04-29 | Planned | 2 | — | $0 | |
| 2011-03-10 | Planned | 1 | — | $0 | |
| 2009-03-18 | Planned | 0 | — | $0 | |
| 2004-04-22 | Planned | 6 | 4 | $900 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within PA, ordered by federal enforcement volume:
- HAMILL MANUFACTURING COMPANYTRAFFORD — 3 federal enforcement records
- MARK MILLWRIGHT & RIGGING, INCORPORATEDEMIGSVILLE — 3 federal enforcement records
- ORBEL CORPORATIONEASTON — 3 federal enforcement records
- ACME MACHINE AND WELDING LLCPUNXSUTAWNEY — 3 federal enforcement records
- ERISCO INDUSTRIES, INC.ERIE — 2 federal enforcement records
- OLYMPIC STEEL, INC.CHAMBERSBURG — 2 federal enforcement records
- RSJ TECHNOLOGIES LLCCANTON — 2 federal enforcement records
- PENN STAINLESS PRODUCTS, INC.JACKSON CENTER — 2 federal enforcement records
- CHALMERS & KUBECK, INC.ASTON — 2 federal enforcement records
- THE YOUNG INDUSTRIES, INC.MUNCY — 2 federal enforcement records
Related searches
- Machine ShopsAll employers in this industry
- Employers in PAState-wide enforcement data
- Machine Shops in PAIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on MICRO TOOL COMPANY, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is MICRO TOOL COMPANY, INC.'s OSHA violation history?
- MICRO TOOL COMPANY, INC. has 5 OSHA inspections on record with 10 violations and $3,036.75 in total penalties.
- How does MICRO TOOL COMPANY, INC.'s safety record compare to its industry?
- MICRO TOOL COMPANY, INC. operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7. MICRO TOOL COMPANY, INC.'s self-reported DART rate is 1.93 compared to an industry average of 1.5.