Establishment profile
MESA CUSTOM MACHINING CORP.
1640 W. SUNRISE BLVD, GILBERT, AZ, 85233
332710 — Machine Shops
EIN 860609282
Summary
MESA CUSTOM MACHINING CORP. has accumulated 16 OSHA violations across 2 inspections over 17 years of recorded history, with $1,000 in total assessed penalties.
The establishment sits in the 85th percentile for violations within its industry-state peer group of 80 employers. Inspection frequency runs at the 71st percentile. The most recent enforcement activity was recorded 2 years ago.
Federal records were found in 2 of 16 sources. Sources without matching records returned empty for this establishment.
Agency coverage
MESA CUSTOM MACHINING CORP. appears in OSHA workplace safety, WHD wage enforcement, and FMCSA motor carrier registration records only. No matching records were found in MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
50% of inspections at this establishment produced violations,
Peer comparison
Worse on violations than most other employers in NAICS 3327 within AZ. Peer group: 80 employers. This establishment has 16 OSHA violations; peer median is 7.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 30 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for MESA CUSTOM MACHINING CORP.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 2+ years. Most recent activity: 2 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
Department of Labor Wage & Hour Division — minimum-wage, overtime, child-labor, FMLA, and prevailing-wage enforcement.
Wage and hour breakdown by law
Per-statute totals across all closed DOL Wage & Hour cases against this employer. Backwages reflect amounts the agency assessed; civil penalty is the separate fine where applicable. Some acts (Davis-Bacon, SCA, CWHSSA, H-2B, CCPA) don't carry a civil penalty field in DOL's data. 1 statute · 15 violations · $9,835 in backwages · $800 in civil penalties
| Statute | Period | Cases | Violations | Workers | Backwages | Civil penalty |
|---|---|---|---|---|---|---|
| FLSA — minimum wage & overtime | Mar 2024 | 1 | 15 | 15 | $9,835 | $800 |
Source: DOL WHD enforcement database, aggregated per statute. Lifetime totals. A case can cite multiple statutes — so the total here may exceed the case count in the table above.
Wage and hour cases
Closed DOL Wage & Hour Division cases (FLSA, FMLA, H-2B, MSPA, and related statutes). Backwages reflect amounts the agency assessed; final payment may differ. 1 case · $9,835 in backwages · 15 workers affected
| Case period | Industry | Backwages | Workers |
|---|---|---|---|
| Mar 2021 – Mar 2024 | Machine Shops | $9,835 | 15 |
Source: DOL WHD enforcement database. Cases shown reflect those the agency has closed and made public.
Mine safety (MSHA)
No MSHA mine safety violations on file for MESA CUSTOM MACHINING CORP.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for MESA CUSTOM MACHINING CORP.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC)
No H-1B, H-2A, or H-2B labor condition applications on file for MESA CUSTOM MACHINING CORP.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for MESA CUSTOM MACHINING CORP.. Verify directly with Environmental Protection Agency →
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for MESA CUSTOM MACHINING CORP.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2019-02-28 | Complaint | 0 | — | $0 | |
| 2008-11-18 | Planned | 16 | 2 | $1,000 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within AZ, ordered by federal enforcement volume:
- WHITE EAGLE MACHINE SHOPTUCSON — 2 federal enforcement records
- ARCAL PRECISION COMPONENTS, INCORPORATEDTUCSON — 2 federal enforcement records
- PRECISION MACHINING SHEET METAL, INC.TUCSON — 1 federal enforcement record
- BLAKE MACHINEPHOENIX — 1 federal enforcement record
- METAL WORKS PRECISION MACHINE & TOOL, INC.TUCSON — 1 federal enforcement record
- VULCAN INDUSTRIES INCPHOENIX — 1 federal enforcement record
- WATERLOO HEALTHCARE, L.L.C.PHOENIX — 1 federal enforcement record
- WEINELL MACHINE INC.TUCSON — 1 federal enforcement record
- JRT HUNT, INC.TEMPE — 1 federal enforcement record
- DESERT ENGINEERING GROUP, INC.TUCSON — 1 federal enforcement record
Related searches
- Machine ShopsAll employers in this industry
- Employers in AZState-wide enforcement data
- Machine Shops in AZIndustry × state cross-filter
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →About this data
This profile aggregates federal enforcement records on MESA CUSTOM MACHINING CORP. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Frequently asked
- What is MESA CUSTOM MACHINING CORP.'s OSHA violation history?
- MESA CUSTOM MACHINING CORP. has 2 OSHA inspections on record with 16 violations and $1,000 in total penalties.
- How does MESA CUSTOM MACHINING CORP.'s safety record compare to its industry?
- MESA CUSTOM MACHINING CORP. operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7. MESA CUSTOM MACHINING CORP.'s self-reported DART rate is 0 compared to an industry average of 1.5.