Establishment profile
MERCURY TOOL & MACHINE, INC.
7420 KARL MAY DRIVE, WACO, TX, 76708
332710 — Machine Shops
Summary
MERCURY TOOL & MACHINE, INC. has accumulated 18 OSHA violations across 4 inspections over 50 years of recorded history, with $1,710 in total assessed penalties.
The establishment sits in the 94th percentile for violations within its industry-state peer group of 493 employers. Inspection frequency runs at the 93rd percentile. The most recent enforcement activity was recorded 12 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
MERCURY TOOL & MACHINE, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
25% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 18 distinct standards shown · 18 citations in this view · $1,710 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A03 II | 1 | 1 | $650 | May 1976 | May 1976 |
| 29 CFR 1910.0217 B01 | 1 | 1 | $650 | May 1976 | May 1976 |
| 29 CFR 1910.0219 D01 | 1 | 1 | $70 | May 1976 | May 1976 |
| 29 CFR 1910.0215 A04 | 1 | 1 | $70 | May 1976 | May 1976 |
| 29 CFR 1910.0215 B09 | 1 | 1 | $55 | May 1976 | May 1976 |
| 29 CFR 1910.0252 A02 IVC | 1 | 1 | $55 | May 1976 | May 1976 |
| 29 CFR 1910.0252 A02 IID | 1 | 1 | $55 | May 1976 | May 1976 |
| 29 CFR 1910.0215 A02 | 1 | 1 | $45 | May 1976 | May 1976 |
| 29 CFR 1910.0106 E02 IV | 1 | 1 | $30 | May 1976 | May 1976 |
| 29 CFR 1910.0242 B | 1 | 1 | $30 | May 1976 | May 1976 |
| 29 CFR 1910.0217 B08 V | 1 | 1 | — | May 1976 | May 1976 |
| 29 CFR 1910.0212 A01 | 1 | 1 | — | May 1976 | May 1976 |
| 29 CFR 1910.0217 B07 III | 1 | 1 | — | May 1976 | May 1976 |
| 29 CFR 1910.0022 D01 | 1 | 1 | — | May 1976 | May 1976 |
| 29 CFR 1910.0217 C01 I | 1 | 1 | — | May 1976 | May 1976 |
| 29 CFR 1910.0217 D09 II | 1 | 1 | — | May 1976 | May 1976 |
| 29 CFR 1910.0219 E01 | 1 | 1 | — | May 1976 | May 1976 |
| 29 CFR 1910.0219 E03 I | 1 | 1 | — | May 1976 | May 1976 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3327 within TX. Peer group: 493 employers. This establishment has 18 OSHA violations; peer median is 4.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 40 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for MERCURY TOOL & MACHINE, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 12+ years. Most recent activity: 12 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for MERCURY TOOL & MACHINE, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for MERCURY TOOL & MACHINE, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for MERCURY TOOL & MACHINE, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for MERCURY TOOL & MACHINE, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for MERCURY TOOL & MACHINE, INC.. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 3 facilities · 2 marked inactive.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
MERCURY TOOL & MACHINE 7420 KARL MAY DR · WACO, TX, 76708 | Water | No Violation Identified | 0 | 0 | — | — | View → |
MERCURY TOOL & MACHINE INC 1112 COLUMBUS AVE · WACO, TX, 76708 | RCRA | No Violation Identified | 0 | 0 | — | — | View → |
MERCURY TOOL & MACHINE INC AIRPORT & ZOO PARK DR · WACO, TX, 76708 | RCRA | No Violation Identified | 0 | 0 | — | — | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2014-01-22 | Complaint | 0 | — | $0 | |
| 2009-01-12 | Planned | 0 | — | $0 | |
| 1976-05-20 | Follow-up | 0 | — | $0 | |
| 1976-04-21 | Planned | 18 | 2 | $1,710 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within TX, ordered by federal enforcement volume:
- AUTOMATIC PRODUCTS CORP.GARLAND — 3 federal enforcement records
- CATERPILLAR, INC.SAN ANTONIO — 3 federal enforcement records
- P&N MACHINE CO., INC.HOUSTON — 2 federal enforcement records
- ARROW MANUFACTURED PRODUCTSWICHITA FALLS — 2 federal enforcement records
- COMMERCE GRINDINGDALLAS — 2 federal enforcement records
- TEAM INDUSTRIAL SERVICES, INC.HOUSTON — 2 federal enforcement records
- GREAT SOUTHWEST TOOL CO.EL PASO — 2 federal enforcement records
- QUALITY INDUSTRIAL FABRICATION INC.HOUSTON — 2 federal enforcement records
- NATIONAL OILWELL VARCO, L.P.HOUSTON — 2 federal enforcement records
- DOOLING MACHINE PRODUCTS, INC.FREEPORT — 2 federal enforcement records
Related searches
- Machine ShopsAll employers in this industry
- Employers in TXState-wide enforcement data
- Machine Shops in TXIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on MERCURY TOOL & MACHINE, INC. from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is MERCURY TOOL & MACHINE, INC.'s OSHA violation history?
- MERCURY TOOL & MACHINE, INC. has 4 OSHA inspections on record with 18 violations and $1,710 in total penalties.
- How does MERCURY TOOL & MACHINE, INC.'s safety record compare to its industry?
- MERCURY TOOL & MACHINE, INC. operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7. MERCURY TOOL & MACHINE, INC.'s self-reported DART rate is 7.21 compared to an industry average of 1.5.