Establishment profile
MAY TOOL & MOLD COMPANY, INC.
2922 WHEELING, KANSAS CITY, MO, 64129
332710 — Machine Shops
Summary
MAY TOOL & MOLD COMPANY, INC. has accumulated 14 OSHA violations across 5 inspections over 51 years of recorded history, with $8,100 in total assessed penalties.
The establishment sits in the 88th percentile for violations within its industry-state peer group of 259 employers. Inspection frequency runs at the 88th percentile. The most recent enforcement activity was recorded 12 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
MAY TOOL & MOLD COMPANY, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 13 distinct standards shown · 14 citations in this view · $8,100 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0242 B | 2 | 2 | $1,575 | Mar 1975 | Feb 2011 |
| 29 CFR 1910.0147 C04 II | 1 | 1 | $2,205 | Feb 2011 | Feb 2011 |
| 29 CFR 1910.0333 B02 IIB | 1 | 1 | $1,500 | Feb 2011 | Feb 2011 |
| 29 CFR 1910.0305 B01 II | 1 | 1 | $1,148 | Aug 2013 | Aug 2013 |
| 29 CFR 1910.0303 B02 | 1 | 1 | $1,148 | Aug 2013 | Aug 2013 |
| 29 CFR 1910.0303 G01 II | 1 | 1 | $500 | Feb 2011 | Feb 2011 |
| 29 CFR 1910.0157 A01 | 1 | 1 | $25 | Mar 1975 | Mar 1975 |
| 29 CFR 1910.0305 G02 III | 1 | 1 | — | Aug 2013 | Aug 2013 |
| 29 CFR 1904.0029 A | 1 | 1 | — | Feb 2011 | Feb 2011 |
| 29 CFR 1910.0157 G02 | 1 | 1 | — | Mar 1984 | Mar 1984 |
| 29 CFR 1904.0002 A | 1 | 1 | — | Aug 1982 | Aug 1982 |
| 29 CFR 1910.0215 A04 | 1 | 1 | — | Mar 1975 | Mar 1975 |
| 29 CFR 1910.0157 D03 I | 1 | 1 | — | Mar 1975 | Mar 1975 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3327 within MO. Peer group: 259 employers. This establishment has 14 OSHA violations; peer median is 3.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for MAY TOOL & MOLD COMPANY, INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for MAY TOOL & MOLD COMPANY, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 12+ years. Most recent activity: 12 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for MAY TOOL & MOLD COMPANY, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for MAY TOOL & MOLD COMPANY, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for MAY TOOL & MOLD COMPANY, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for MAY TOOL & MOLD COMPANY, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for MAY TOOL & MOLD COMPANY, INC.. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility · 1 marked inactive.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
MAY TOOL & MOLD CO INC 2922 WHEELING · KANSAS CITY, MO, 64129 | RCRA | No Violation Identified | 0 | 0 | — | — | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for MAY TOOL & MOLD COMPANY, INC.. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of DefenseHOLDER,MAINTENANCEcontract · Last action 2008-09-30$53,984
- Department of DefenseTOOL KIT,AIRCRAFT Mcontract · Last action 2010-04-05$33,794
- Department of DefenseMANUFACTURE OF DUCT ASSEMBLY, CABIN AIR (2 EA).contract · Last action 2014-05-14$21,338
- Department of DefenseDUCT ASSEMBLY,AIR Ccontract · Last action 2010-02-22$21,338
- Department of DefenseGROUND ADAPTER SET; INTERFACES AIRCRAFT WITH TRIPOD JACKS.contract · Last action 2011-08-15$19,250
- Department of DefenseADAPTER SET,GROUNDcontract · Last action 2008-09-26$18,292
- Department of DefenseLOCK,AIRCRAFT GROUNcontract · Last action 2008-09-12$14,812
- Department of DefenseTOOL KIT,AIRCRAFT Mcontract · Last action 2009-12-22$14,385
- Department of DefenseAIRCRAFT JACK PADcontract · Last action 2008-07-16$13,100
- Department of DefenseSIMULATOR VERIFIER COMPcontract · Last action 2008-12-09$11,649
- Department of DefenseNEW MANUFACTURE OF 1 EACH DUCT ASSEMBLY NSN: 1660-01-287-6123contract · Last action 2014-08-13$10,950
- Department of DefenseDUCT ASSEMBLY,AIR Ccontract · Last action 2010-02-22$10,860
- Department of DefenseTOOL KIT, AIRCRAFTcontract · Last action 2009-04-29$9,736
- Department of DefenseSLING,AIRCRAFT MAINcontract · Last action 2008-09-19$9,420
- Department of DefenseLOCK,AIRCRAFT GROUNcontract · Last action 2009-11-30$8,582
- Department of DefenseLOCK, AIRCRAFT GROUNDcontract · Last action 2008-10-31$8,497
- Department of DefenseADAPTER SOCKETcontract · Last action 2009-05-28$7,524
- Department of DefenseOTHER AIRCRAFT PART AND AUXILIARY EQUIPMENT MANUFACTURINGcontract · Last action 2011-02-28$5,205
- Department of DefenseOPEN & INSPECTcontract · Last action 2021-07-21$5,005
- Department of DefensePLUGcontract · Last action 2025-01-08$2,150
- Department of DefensePLUGcontract · Last action 2024-07-11$2,150
- Department of DefenseAILERON FREE PLAY, P/N B003310M05087-000contract · Last action 2018-07-03$0
- Department of DefenseCIRCLE SHEARcontract · Last action 2014-08-21$0
- Department of DefensePIN ASSEMBLY,DRAG BRACE APEXcontract · Last action 2009-09-24$0
- Department of DefenseCOLLAR,UPPER,TORQUE ARM,LANDINGcontract · Last action 2009-01-28$0
- Department of Defense200606!000364!5700!FA8203!OO-ALC/PKI/LGJL !FA820306M0196 !A!N! !N! ! !20060309!20080220!007168685!007168685!007168685!N!MAY TOOL & MOLD CO INC !2922 WHEELING AVE !KANSAS CITY !MO!64129!38000!095!29!KANSAS CITY !JACKSON !MISSOURI !+000000050630!Y!N!000000000000!1620!AIRCRAFT LANDING GEAR COMPONENTS !A1A!AIRFRAMES AND SPARES !000 !NOT DISCERNABLE !336413!E! !9! ! ! ! ! !99990909!C! ! !A! !A!N!J!2!004! ! !A!N!Z! ! !N!B!N!N! ! !A! !B!A!000!A!B!N! ! ! ! ! ! !0001! !contract · Last action 2010-10-12$-4,652
Federal contract dollars to this establishment. Primary NAICS: 336413 - OTHER AIRCRAFT PARTS AND AUXILIARY EQUIPMENT MANUFACTURING. Last action: 2025-01-08. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2013-08-13 | Planned | 3 | — | $2,295 | |
| 2011-01-20 | Planned | 5 | 2 | $5,780 | |
| 1984-03-28 | Planned | 1 | — | $0 | |
| 1982-08-18 | Complaint | 1 | — | $0 | |
| 1975-03-03 | Planned | 4 | — | $25 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within MO, ordered by federal enforcement volume:
- LMI AEROSPACE INC.WASHINGTON — 2 federal enforcement records
- O & F MACHINE PRODUCTS COMPANYJOPLIN — 2 federal enforcement records
- TUELL TOOL COMPANY INC.FERGUSON — 2 federal enforcement records
- PAVYER PRINTING MACHINE WORKSST. LOUIS — 2 federal enforcement records
- SOUTH SIDE MACHINE WORKS INC.SAINT LOUIS — 2 federal enforcement records
- KUHAR METALLIZING COMPANY, INC.KANSAS CITY — 2 federal enforcement records
- ENVISION TECH, INC.SAINT JOSEPH — 2 federal enforcement records
- HEITZ MACHINE & MANUFACTURINGMARYLAND HEIGHTS — 2 federal enforcement records
- R.M. INDUSTRIES, INC.PURDY — 1 federal enforcement record
- M G MACHINE INCBELTON — 1 federal enforcement record
Related searches
- Machine ShopsAll employers in this industry
- Employers in MOState-wide enforcement data
- Machine Shops in MOIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on MAY TOOL & MOLD COMPANY, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is MAY TOOL & MOLD COMPANY, INC.'s OSHA violation history?
- MAY TOOL & MOLD COMPANY, INC. has 5 OSHA inspections on record with 14 violations and $8,100 in total penalties.
- How does MAY TOOL & MOLD COMPANY, INC.'s safety record compare to its industry?
- MAY TOOL & MOLD COMPANY, INC. operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7.