Establishment profile
MASTER MACHINE WORKS INC
300 UTILITIES ROAD, SPARTANBURG, SC, 29302
332813 — Electroplating, Plating, Polishing, Anodizing, and Coloring
EIN 570739326
Summary
MASTER MACHINE WORKS INC has accumulated 6 OSHA violations across 4 inspections over 25 years of recorded history, with $3,250 in total assessed penalties.
The establishment sits in the 55th percentile for violations within its industry-state peer group of 50 employers. Inspection frequency runs at the 63rd percentile. The most recent enforcement activity was recorded 7 years ago.
Federal records were found in 2 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
MASTER MACHINE WORKS INC appears in OSHA workplace safety, MSHA mine safety, and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
50% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 6 distinct standards shown · 6 citations in this view · $3,250 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.1026 C | 1 | 1 | $1,250 | Nov 2018 | Nov 2018 |
| 29 CFR 1910.1026 E01 | 1 | 1 | $1,250 | Nov 2018 | Nov 2018 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $750 | Nov 2018 | Nov 2018 |
| 29 CFR 1910.1026 F01 I | 1 | 1 | — | Nov 2018 | Nov 2018 |
| 29 CFR 1910.1026 H01 | 1 | 1 | — | Nov 2018 | Nov 2018 |
| 29 CFR 1910.1026 I01 | 1 | 1 | — | Nov 2018 | Nov 2018 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Above average violations in NAICS 3328 within SC. Peer group: 50 employers. This establishment has 6 OSHA violations; peer median is 4.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 34 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for MASTER MACHINE WORKS INC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 7+ years. Most recent activity: 7 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for MASTER MACHINE WORKS INC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
Company-level in SC — for MASTER MACHINE WORKS INC, not this location alone
Mine Safety & Health Administration — citations issued at mining operations. MSHA records cases at the company/regional level (no worksite address), so these are matched by company name and state and may span other MASTER MACHINE WORKS INC operations in the same state.
MSHA citations
Mine Safety and Health Administration citations. S&S (significant and substantial) marks violations that could reasonably contribute to a serious injury. Negligence rating is MSHA’s operator-culpability assessment (none, low, moderate, high, or reckless disregard). Proposed = assessed at issuance; Paid = post-settlement / appeal. 2 citations · 1S&S · 2 contractor · $368 proposed / $368 paid.
| Citation | Mine | Date | Section | S&S | Negligence | Proposed | Paid |
|---|---|---|---|---|---|---|---|
| 6116490 | LIBERTY QUARRY Pickens, SC contractor: Master Machine Works Inc | Aug 2008 | — | Yes | ModNegligence | $243 | $243 |
| 9630330 | Black Creek Sand Mine Chesterfield, SC contractor: Master Machine Works Inc | Jun 2021 | — | No | ModNegligence | $125 | $125 |
Source: MSHA citation database. “Contractor” annotations indicate the cited party was on-site at the mine but not the mine’s operator -- responsibility attaches to the contractor LLC, not the mine’s owner. Section codes reference 30 CFR (the Mine Safety and Health regulations).
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for MASTER MACHINE WORKS INC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for MASTER MACHINE WORKS INC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for MASTER MACHINE WORKS INC. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
MASTER MACHINE WORKS 300 UTILITY RD · SPARTANBURG, SC, 29302 | AirRCRA | No Violation Identified | 0 | 0 | — | Aug 2019 | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for MASTER MACHINE WORKS INC. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2019-05-14 | Follow-up | 0 | — | $0 | |
| 2018-08-08 | Referral | 1 | 1 | $750 | |
| 2018-08-01 | Planned | 5 | 5 | $2,500 | |
| 2001-03-15 | Planned | 0 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in electroplating, plating, polishing, anodizing, and coloring within SC, ordered by federal enforcement volume:
- ADC FINISHING CO., INC.YORK — 2 federal enforcement records
- PALMETTO PLATING COMPANY, INC.EASLEY — 2 federal enforcement records
- HI-TEC PLATING, INC.SENECA — 2 federal enforcement records
- CAPSCO INCGREENVILLE — 2 federal enforcement records
- GREENWOOD FABRICATING & PLATING, INC.GREENWOOD — 2 federal enforcement records
- SPARTAN INDUSTRIES, INC.PACOLET — 1 federal enforcement record
- B & B PLATING SOUTH, INC.BELTON — 1 federal enforcement record
- B-B PLATING OF BELTON LLCBELTON — 1 federal enforcement record
- BOOTH ELECTRO SYSTEMS, INC.GREENVILLE — 1 federal enforcement record
- ARMOLOY SOUTHEAST, INC.SUMTER — 1 federal enforcement record
Related searches
- Electroplating, Plating, Polishing, Anodizing, and ColoringAll employers in this industry
- Employers in SCState-wide enforcement data
- Electroplating, Plating, Polishing, in SCIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on MASTER MACHINE WORKS INC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is MASTER MACHINE WORKS INC's OSHA violation history?
- MASTER MACHINE WORKS INC has 4 OSHA inspections on record with 6 violations and $3,250 in total penalties.
- How does MASTER MACHINE WORKS INC's safety record compare to its industry?
- MASTER MACHINE WORKS INC operates in the electroplating, plating, polishing, anodizing, and coloring industry. The industry average Total Recordable Incident Rate (TRIR) is 4.1. MASTER MACHINE WORKS INC's self-reported DART rate is 0 compared to an industry average of 2.3.