Skip to main content

Establishment profile

MANUFACTURING SYSTEMS & EQUIPMENT, INC.

2812 CHAMBERS DR, STE E, MONROE, NC, 28110
339999All Other Miscellaneous Manufacturing

Download as PDF →

OSHA inspections
7
over 31 years
Violations
37
$4,925 in penalties
Penalties
$4,925
$133 avg
Accident investigations on record
1 hospitalizations · 1 National Emphasis Program inspections · 1 OSHA follow-up

Summary

MANUFACTURING SYSTEMS & EQUIPMENT, INC. has accumulated 37 OSHA violations across 7 inspections over 31 years of recorded history, with $4,925 in total assessed penalties.

The establishment sits in the 92nd percentile for violations within its industry-state peer group of 334 employers. Inspection frequency runs at the 98th percentile. The most recent enforcement activity was recorded 13 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

MANUFACTURING SYSTEMS & EQUIPMENT, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
7
0.2 / yr · last 31 yrs
Violations
37
1.2 / yr
Penalties
$4,925
$133 avg / violation
57% serious43% other
Inspection trigger · planned
3 of 7
Inspection trigger · complaint
2 of 7

86% of inspections at this establishment produced violations, with 6 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 23 citations in this view · $4,925 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0215 B0922$250Mar 2002Dec 2005
29 CFR 1910.0212 A0122$250Sep 1997Mar 2002
29 CFR 1910.0215 A0422$100Mar 2002Dec 2005
29 CFR 1910.0178 L02 II11$1,050Oct 2007Oct 2007
29 CFR 1910.0147 C0111$1,050Mar 1995Mar 1995
29 CFR 1910.0147 C07 IB11$925Dec 2012Dec 2012
29 CFR 1910.0178 L04 III11$325Dec 2012Dec 2012
29 CFR 1910.0022 C11$250Sep 1997Sep 1997
29 CFR 1910.0133 A0111$200Dec 2012Dec 2012
29 CFR 1910.0213 I0111$175Mar 2002Mar 2002
29 CFR 1910.0184 D11$150Sep 1997Sep 1997
29 CFR 1910.1200 E01 I11$100Dec 2012Dec 2012
29 CFR 1910.0023 C0111$100Mar 2002Mar 2002
29 CFR 1910.0157 G0111Dec 2012Dec 2012
29 CFR 1910.1200 G0811Dec 2012Dec 2012
29 CFR 1910.1200 H0111Dec 2012Dec 2012
29 CFR 1910.0242 B11Dec 2012Dec 2012
29 CFR 1910.0132 D0111Dec 2012Dec 2012
29 CFR 1910.0157 C0411Dec 2012Dec 2012
29 CFR 1910.0305 B0211Dec 2005Dec 2005

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

92nd

Worse on violations than most other employers in NAICS 3399 within NC. Peer group: 334 employers. This establishment has 37 OSHA violations; peer median is 5.

Fewer violationsMore violations
Penalty percentile
88th
peer median: $588
Inspection frequency
98th
peer median: 1

Safety self-report (OSHA 300A)

Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.

DART rate
5.0
vs industry
+3.4
TRIR
5.0
vs industry
+2.5

Reported for 19 average annual employees at this establishment.

Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.

Industry benchmark

Industry avg TRIR
2.4
BLS SOII 2024
Industry avg DART
1.5
BLS SOII 2024
Self-reported TRIR
5.0
OSHA ITA Form 300A (employer self-reported)

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
3
Complaint
2
Accident
1
Follow-up
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for MANUFACTURING SYSTEMS & EQUIPMENT, INC.. Verify directly with Occupational Safety and Health Administration

OSHA accident events

Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.

DateEventInjuriesHospitalizedFatalities
Aug 20, 2007FRACTURE,MANUAL MAT HANDLING,MECH MAT HANDLING,SLING,LEG,UNSTABLE LOAD11

Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
13 years ago

No federal enforcement activity has been recorded against this establishment in 13+ years. Most recent activity: 13 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for MANUFACTURING SYSTEMS & EQUIPMENT, INC.. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for MANUFACTURING SYSTEMS & EQUIPMENT, INC.. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for MANUFACTURING SYSTEMS & EQUIPMENT, INC.. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for MANUFACTURING SYSTEMS & EQUIPMENT, INC.. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for MANUFACTURING SYSTEMS & EQUIPMENT, INC.. Verify directly with Environmental Protection Agency

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for MANUFACTURING SYSTEMS & EQUIPMENT, INC.. Verify directly with UVA Corporate Prosecution Registry

Inspection history

DateTriggerViolationsSeriousPenalty
2013-03-11Follow-up0$0
2012-09-28Planned105$1,550
2007-09-13Accident11$1,050
2005-12-08Planned42$250
2002-03-08Planned75$475
1997-09-04Complaint44$550
1994-11-09Complaint114$1,050

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in all other miscellaneous manufacturing within NC, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on MANUFACTURING SYSTEMS & EQUIPMENT, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is MANUFACTURING SYSTEMS & EQUIPMENT, INC.'s OSHA violation history?
MANUFACTURING SYSTEMS & EQUIPMENT, INC. has 7 OSHA inspections on record with 37 violations and $4,925 in total penalties.
How does MANUFACTURING SYSTEMS & EQUIPMENT, INC.'s safety record compare to its industry?
MANUFACTURING SYSTEMS & EQUIPMENT, INC. operates in the all other miscellaneous manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.4. MANUFACTURING SYSTEMS & EQUIPMENT, INC.'s self-reported DART rate is 4.95 compared to an industry average of 1.5.