Skip to main content
FastDOL

Establishment profile

MAGTROL, INC.

70 GARDENVILLE PARKWAY, BUFFALO, NY, 14224
334519 — Other Measuring and Controlling Device Manufacturing
EIN 160779417

Download as PDF →

OSHA inspections
4
over 50 years
Violations
14
$7,080 in penalties
Penalties
$7,080
$506 avg
Violations across 2 federal agencies
Enforcement actions from multiple agencies may indicate systemic compliance issues across functions.
Accident investigations on record
1 National Emphasis Program inspections

Summary

MAGTROL, INC. has accumulated 14 OSHA violations across 4 inspections over 50 years of recorded history, with $7,080 in total assessed penalties.

The establishment sits in the 96th percentile for violations within its industry-state peer group of 79 employers. Inspection frequency runs at the 94th percentile. The most recent enforcement activity was recorded 10 years ago.

Federal records were found in 2 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

MAGTROL, INC. appears in OSHA workplace safety and NLRB labor relations records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.

OSHA workplace safety

Inspections
4
0.1 / yr · last 50 yrs
Violations
14
0.3 / yr
Penalties
$7,080
$506 avg / violation
64% serious36% other
Inspection trigger · planned
3 of 4
Inspection trigger · follow-up
1 of 4

75% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 14 distinct standards shown · 14 citations in this view · $7,080 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0147 C0811$2,600Feb 2016Feb 2016
29 CFR 1910.0147 C04 I11$2,600Feb 2016Feb 2016
29 CFR 1910.0147 C04 II11$420May 1992May 1992
29 CFR 1910.0212 A0111$420May 1992May 1992
29 CFR 1910.1200 F05 I11$315May 1992May 1992
29 CFR 1910.0094 D09 IV11$315May 1992May 1992
29 CFR 1910.0094 D09 III11$315May 1992May 1992
29 CFR 1910.0309 A 02504511$50Sep 1975Sep 1975
29 CFR 1910.0107 C0711$45Sep 1975Sep 1975
29 CFR 1910.0147 C07 I A11—Feb 2016Feb 2016
29 CFR 1910.1200 F05 II11—May 1992May 1992
29 CFR 1910.0157 G0111—May 1992May 1992
29 CFR 1910.0219 E01 I11—Sep 1975Sep 1975
29 CFR 1910.0219 B0111—Sep 1975Sep 1975

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

96th

Worse on violations than nearly every other employer in NAICS 3345 within NY. Peer group: 79 employers. This establishment has 14 OSHA violations; peer median is 3.

Fewer violationsMore violations
Penalty percentile
81st
peer median: $2,000
Inspection frequency
94th
peer median: 1

Safety self-report (OSHA 300A)

Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.

DART rate
0.0
vs industry
−0.9
TRIR
0.0
vs industry
−1.2

Reported for 48 average annual employees at this establishment.

Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.

Industry benchmark

Industry avg TRIR
1.2
BLS SOII 2024
Industry avg DART
0.9
BLS SOII 2024
Self-reported TRIR
0.0
OSHA ITA Form 300A (employer self-reported)

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
3
Follow-up
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for MAGTROL, INC.. Verify directly with Occupational Safety and Health Administration →

Activity timeline

Data refreshed
Weekly
First OSHA inspection
—
Most recent activity
10 years ago

No federal enforcement activity has been recorded against this establishment in 10+ years. Most recent activity: 10 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for MAGTROL, INC.. Verify directly with Wage and Hour Division →

Mine safety (MSHA)

No MSHA mine safety violations on file for MAGTROL, INC.. Verify directly with Mine Safety and Health Administration →

Labor relations (NLRB)

Company-level in NY — for MAGTROL, INC., not this location alone

Total cases
3
Unfair labor practice
3

National Labor Relations Board — unfair labor practice charges and union representation cases. The NLRB records cases at the company/regional level (no worksite address), so these are matched by company name and state and may span other MAGTROL, INC. locations in the same state.

NLRB cases

National Labor Relations Board cases involving this employer. Includes unfair labor practice (ULP) filings and representation election proceedings. NLRB enforcement is process-driven; no per-case monetary penalty is assessed (remedies are case-by-case backpay orders, posting requirements, election re-runs, etc.). 3 cases · 3 ULP

Case numberTypeFiledClosedStatusRegion
03-CA-023800Unfair labor practiceSep 2002Jan 2003ClosedRegion 03, Buffalo, New York
03-CA-023673Unfair labor practiceJun 2002Jan 2003ClosedRegion 03, Buffalo, New York
03-CA-023629Unfair labor practiceMay 2002Jan 2003ClosedRegion 03, Buffalo, New York

Source: NLRB case files. Rows shown are those the agency has published. Region numbers (1–31) correspond to NLRB's geographic offices.

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for MAGTROL, INC.. Verify directly with Office of Foreign Labor Certification →

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for MAGTROL, INC.. Verify directly with Environmental Protection Agency →

EPA-registered facilities

Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.

FacilityPermitsStatusInspectionsFormal actionsPenaltiesLast inspectedECHO
MAGTROL INC
70 GARDENVILLE PARKWAY · WEST SENECA, NY, 14224
AirRCRANo Violation Identified00—Nov 2004View →

Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for MAGTROL, INC.. Verify directly with UVA Corporate Prosecution Registry →

Federal contracts

This location

Obligated (5-yr)
$31K
Obligated (all-time)
$931K
Awards
56
Top agency
Department of Defense
$611K
Top agencies by obligation (this location)
Department of Defense$611K
National Aeronautics and Space Administration$311K
Department of Commerce$9K
Largest awards (top 50 of 56)
  • Department of Defense
    EDDY CURRENT DYNAMOMETER, POWER SUPPLY, AND TRAINING
    contract · Last action 2017-07-14
    $155,285
  • Department of Defense
    DYNAMOMETER, SHORT, 5VDC 3 EA LESS T-SLOT BASE, 3 EA TAB 1457S - DYNAMOMETER TABLE EA
    contract · Last action 2018-09-24
    $79,860
  • National Aeronautics and Space Administration
    MAGTROL 3WB15 EDDY CURRENT DYNAMOMETER WITH CONTROLLER AND INSTRUMENTATION
    contract · Last action 2014-08-26
    $62,470
  • National Aeronautics and Space Administration
    DYNAMOMETER TESTING SYSTEM
    contract · Last action 2014-06-17
    $37,786
  • National Aeronautics and Space Administration
    DYNAMOMETER
    contract · Last action 2009-07-21
    $37,150
  • Department of Defense
    MOTOR TEST SYSTEM
    contract · Last action 2009-04-06
    $32,707
  • National Aeronautics and Space Administration
    DYNAMOMETER, DYNO BASE AND CONTROLLER ASSEMBLY
    contract · Last action 2017-05-31
    $31,907
  • National Aeronautics and Space Administration
    SIMPLE HIGH-SPEED DYNAMOMETER
    contract · Last action 2023-05-24
    $30,950
  • National Aeronautics and Space Administration
    DYNAMOMETER
    contract · Last action 2017-08-18
    $27,738
  • Department of Defense
    MARINE ENGINE DYNOMOMETER TEST SYSTEM
    contract · Last action 2017-06-30
    $27,080
  • Department of Defense
    HYSTERESIS DYNAMOMETER/LONG BASE
    contract · Last action 2015-09-18
    $24,120
  • National Aeronautics and Space Administration
    HYSTERESIS DYAMOMETER/FIXTURE WITH PT25 T-SLOT BASE/OPEN LOOP CONTROLLER WITH DISPLAY
    contract · Last action 2010-09-13
    $23,740
  • Department of Defense
    MICRODYNE; PART NO. 005784; MICRO DYNAMO
    contract · Last action 2010-06-04
    $23,215
  • Department of Defense
    DYNAMOMETER, REMOTE
    contract · Last action 2019-06-20
    $23,025
  • Department of Defense
    EDDY CURRENT DYNAMOMETER
    contract · Last action 2021-03-24
    $22,260
  • Department of Defense
    HIGH SPEED THREE-PHASE POWER ANALYZER. M
    contract · Last action 2012-09-17
    $15,890
  • Department of Defense
    POWER SUPPLY REGULATORS, COUPLINGS, TORQUE TRANSDUCERS.
    contract · Last action 2013-09-10
    $15,758
  • Department of Defense
    DYNAMOMETER
    contract · Last action 2008-04-03
    $15,500
  • National Aeronautics and Space Administration
    OT 1 - HD-715-5N-0100 006719 DYNAMOMETER, SHORT, 5VDC AND 1 - PT-0800, BASE PLATE, T-SLOT 204227 WITH MOUNTING HOLES.
    contract · Last action 2019-10-07
    $14,760
  • Department of Defense
    ELECTRO DYNAMOMETER
    contract · Last action 2013-06-28
    $14,660
  • Department of Defense
    TF 312 WITH 70 PPR SPEED PU P/N TF212/02
    contract · Last action 2014-03-05
    $14,158
  • Department of Defense
    POWER ANALYZER PART NUMBER: 6530
    contract · Last action 2013-08-15
    $14,020
  • National Aeronautics and Space Administration
    TORQUE TRANSDUCER
    contract · Last action 2010-05-28
    $13,960
  • National Aeronautics and Space Administration
    MAGTROL DYNAMOMETER
    contract · Last action 2012-02-28
    $12,820
  • Department of Defense
    DYNAMOMETER
    contract · Last action 2012-02-23
    $12,000
  • Department of Defense
    DYNAMOMETER,HYSTERE
    contract · Last action 2017-08-08
    $10,840
  • Department of Defense
    DYNAMOMETER/120 OZ. IN. 1000W
    contract · Last action 2013-06-28
    $10,395
  • Department of Defense
    HYSTERESIS DYNAMOMETER
    contract · Last action 2007-12-19
    $10,378
  • Department of Defense
    MODIFICATION OF TWO (2) EACH MAGTROL
    contract · Last action 2008-04-02
    $9,924
  • Department of Commerce
    PURCHASE THE FOLLOWING EQUIPMENT: DIAL WEIGHT DYNAMOMETER IN ENGLISH TORQUE MEASUREMENT UNITS, RATED TORQUE 200, 400 AND 800 OZ.IN, MAX BRAKING POWER 1400 W, MAX SPEED 8,000 RPM. SHORT BASE PLATE, MODEL #HD-705-1-0100, PN: 00XXXX AND TORQUE, SPEED, POWER DISPLAY. INCLUDES FREE TM SOFTWARE FOR WINDOWS, MODEL #3410, PN: 006072 AND CURRENT REGULATED POWER SUPPLY (24V COIL), MODEL #5210-2, PN: 003313
    contract · Last action 2008-03-14
    $8,751
  • National Aeronautics and Space Administration
    HYSTERESIS DYNAMOMETER HEAD
    contract · Last action 2015-07-28
    $7,120
  • Department of Defense
    POWER ANALYZER PART NUMBER: 6530
    contract · Last action 2011-03-13
    $7,010
  • Department of Defense
    DYNAMOMETER
    contract · Last action 2018-06-12
    $6,212
  • National Aeronautics and Space Administration
    HYSTERESIS BRAKE DYNAMOMETER
    contract · Last action 2009-09-21
    $6,165
  • Department of Defense
    HYSTERESIS DYNAMOMETER
    contract · Last action 2009-08-10
    $6,085
  • Department of Defense
    INSTR'S&RELATED PROD'S MFG FOR MSRING, DSPLYING,&CNTRLING IND PRCS VARIABLES
    contract · Last action 2011-07-25
    $5,980
  • Department of Defense
    HYSTERESIS DYNAMOMETER
    contract · Last action 2013-04-19
    $5,710
  • Department of Defense
    ICBM CUSTOMIZABLE MOTOR TEST STAND DYNAMOMETER
    contract · Last action 2021-07-12
    $5,700
  • Department of Defense
    OTHER MEASURING AND CONTROLLING DEVICE MANUFACTURING TAS: 97 8242 000
    contract · Last action 2011-03-01
    $5,680
  • Department of Defense
    DYNAMOMETER
    contract · Last action 2010-11-02
    $5,600
  • Department of Defense
    DYNO TABLE
    contract · Last action 2013-01-25
    $5,330
  • Department of Defense
    CONTROLLER, DYNAMOM
    contract · Last action 2017-11-15
    $4,971
  • National Aeronautics and Space Administration
    MAGTROL CONTROLLER
    contract · Last action 2009-08-12
    $4,820
  • Department of Defense
    HB-21-3525 HYSTERESIS BRAKE
    contract · Last action 2011-09-21
    $4,400
  • Department of Defense
    IGF::OT::IGF REPAIR/CALIBRATION OF DYNAMOMETOR. THE SERVICE CONTRACT ACT DOES NOT APPLY TO THIS ACQUISITION BASED ON THE LABOR PORTION OF THIS REPAIR IS ONLY $870.00 AND DOES NOT EXCEED $2,500 NEEDED FOR THIS ACT TO APPLY.
    contract · Last action 2015-12-03
    $3,752
  • Department of Defense
    OPEN LOOP CONTROLLER WITH DISPLAY
    contract · Last action 2008-10-06
    $3,633
  • Department of Defense
    FACTORY REPAIR OF A DYNAMOMETER
    contract · Last action 2012-02-24
    $3,000
  • Department of Defense
    DYNAMOMETER TESTING AND REPAIR.
    contract · Last action 2019-04-18
    $2,952
  • Department of Defense
    DYNAMOMETER REPAIR SERVICE
    contract · Last action 2014-01-17
    $2,844
  • Department of Defense
    DYNAMOMETER TORQUE CONVERTER FOR THE ICBM WEAPON SYSTEM.
    contract · Last action 2017-07-18
    $1,380

Federal contract dollars to this establishment. Primary NAICS: 334513 - INSTRUMENTS AND RELATED PRODUCTS MANUFACTURING FOR MEASURING, DISPLAYING, AND CONTROLLING INDUSTRIAL PROCESS VARIABLES. Last action: 2023-05-24. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.

Inspection history

DateTriggerViolationsSeriousPenalty
2015-12-02Planned33$5,200
1992-04-13Programmed Other76$1,785
1975-10-17Follow-up0—$0
1975-08-29Planned4—$95

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in other measuring and controlling device manufacturing within NY, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on MAGTROL, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is MAGTROL, INC.'s OSHA violation history?
MAGTROL, INC. has 4 OSHA inspections on record with 14 violations and $7,080 in total penalties.
How does MAGTROL, INC.'s safety record compare to its industry?
MAGTROL, INC. operates in the other measuring and controlling device manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 1.2. MAGTROL, INC.'s self-reported DART rate is 0 compared to an industry average of 0.9.