Establishment profile
MACHINE TOOL RESEARCH INC
405 BLOSSOM ROAD, ROCHESTER, NY, 14610
333517 — Machine Tool Manufacturing
Summary
MACHINE TOOL RESEARCH INC has accumulated 10 OSHA violations across 3 inspections over 16 years of recorded history, with $11,412 in total assessed penalties.
The establishment sits in the 75th percentile for violations within its industry-state peer group of 105 employers. Inspection frequency runs at the 74th percentile. The most recent enforcement activity was recorded 3 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
MACHINE TOOL RESEARCH INC appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
67% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 10 distinct standards shown · 10 citations in this view · $11,412 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0147 C06 I | 1 | 1 | $2,657 | Jun 2023 | Jun 2023 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $2,657 | Jun 2023 | Jun 2023 |
| 29 CFR 1910.0147 C07 I A | 1 | 1 | $2,657 | Jun 2023 | Jun 2023 |
| 29 CFR 1910.0215 B09 | 1 | 1 | $1,992 | Jun 2023 | Jun 2023 |
| 29 CFR 1910.0106 E06 I | 1 | 1 | $810 | Mar 2010 | Mar 2010 |
| 29 CFR 1910.0134 C01 | 1 | 1 | $640 | Mar 2010 | Mar 2010 |
| 29 CFR 1910.0134 K01 | 1 | 1 | — | Mar 2010 | Mar 2010 |
| 29 CFR 1910.0134 F02 | 1 | 1 | — | Mar 2010 | Mar 2010 |
| 29 CFR 1910.0134 E01 | 1 | 1 | — | Mar 2010 | Mar 2010 |
| 29 CFR 1910.0106 E06 II | 1 | 1 | — | Mar 2010 | Mar 2010 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Above average violations in NAICS 3335 within NY. Peer group: 105 employers. This establishment has 10 OSHA violations; peer median is 5.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 45 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for MACHINE TOOL RESEARCH INC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 3+ years. Most recent activity: 3 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for MACHINE TOOL RESEARCH INC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for MACHINE TOOL RESEARCH INC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for MACHINE TOOL RESEARCH INC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for MACHINE TOOL RESEARCH INC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for MACHINE TOOL RESEARCH INC. Verify directly with Environmental Protection Agency →
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for MACHINE TOOL RESEARCH INC. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of Defense8508549786!IPE - TURNING EQUIPMENTcontract · Last action 2026-01-23$66,744,834
- Department of DefenseSHAFT LATHE FOR PORTSMOUTH NAVAL SHIPYARDcontract · Last action 2014-12-09$10,219,639
- Department of DefenseIGF:OT::IGF CONTRACT IS TO PROVIDE LABOR, EQUIPMENT AND MATERIAL FOR THE REBUILD OF ONE (1) RAVENSBURG HOLLOW SPINDLE LATHE IN CAIRO, EGYPT PER SCOPE OF WORKcontract · Last action 2015-03-25$1,677,758
- Department of DefenseFANUC SPARE PARTS KITcontract · Last action 2026-01-15$1,597,185
- Department of DefenseCINCINNATI HYPRO VERTICAL TURRET REPAIRcontract · Last action 2020-09-18$946,544
- Department of DefenseMATTISON SURFACE GRINDER REBUILDcontract · Last action 2013-01-18$825,357
- Department of DefenseREPAIR OF BETTS BRIDGEFORD LATHE TAILSTOCKcontract · Last action 2022-04-18$568,576
- Department of DefenseREFURBISHMENT OF BETTS-BRIDGEFORD LATHEcontract · Last action 2021-01-14$567,720
- Department of DefenseREBUILD OF 42" KING TURRET LATHEcontract · Last action 2023-11-30$550,898
- Department of DefenseIGF::OT::IGF TO COVER THE COST OF LABOR, MATERIAL AND EQUIPMENT FOR REBUILD/RETROFIT MATTISON ROTARY GRINDER FOR THE WATERVLIET ARSENAL, NY 12189-4000.contract · Last action 2017-03-02$465,000
- Department of DefenseUNIVERSAL BORING MACHINE ALPHA ABG MNTcontract · Last action 2021-09-26$389,895
- Department of Defense8510785210!IPE - COMPONENTScontract · Last action 2025-04-28$385,660
- Department of DefenseTAILSTOCKcontract · Last action 2021-06-09$334,500
- Department of DefenseTAILSTOCKcontract · Last action 2020-11-30$321,751
- Department of the Interior3-AXIS UPGRADE KIT FOR CINCINNATI VERTICAL TURNING LATHE AT HOOVER DAMcontract · Last action 2017-12-28$318,640
- Department of DefenseORDER TO COVER THE COST OF LABOR, MATERIAL AND EQUIPMENT FOR THE REBUILD FIVE EACH REVOLVING RESTS, FOR FMS-100, IN CAIRO, EGY.contract · Last action 2018-07-30$296,000
- Department of Defense8510776753!IPE - COMPONENTS (2)contract · Last action 2025-04-04$279,991
- Department of DefenseMANUAL LATHEcontract · Last action 2022-05-11$278,462
- Department of DefenseSHAFT LATHE RACK REPLACEMENTcontract · Last action 2025-02-12$274,011
- Department of DefenseOPW SHAFT LATHE CENTERcontract · Last action 2025-08-06$223,440
- Department of DefenseLATHE RESTORATIONcontract · Last action 2019-06-11$190,917
- Department of DefenseBETTS LATHE HEADSTOCK REPAIRcontract · Last action 2019-03-15$175,044
- Department of DefenseSHAFT LATHE GEARBOX REBUILD & TUNINGcontract · Last action 2023-04-11$140,097
- Department of DefenseREPAIR SERVICES: LATHEcontract · Last action 2010-10-12$129,690
- Department of DefenseIGF::OT::IGF HEADSTOCK REPAIR ON LATHEcontract · Last action 2016-11-08$128,301
- Department of DefenseLATHE EVALUATIONcontract · Last action 2018-10-22$119,190
- Department of DefenseREPAIR OF BETTS SHAFT LATHEcontract · Last action 2024-01-23$100,640
- Department of Defense8511298519!IPE - COMPONENTScontract · Last action 2025-12-22$97,950
- Department of DefenseBETTS SHAFT LATHE EVALUATIONcontract · Last action 2020-07-02$71,871
- Department of DefenseMOTORcontract · Last action 2019-10-30$56,493
- Department of DefenseMTR SHAFT LATHE AND MILLING HEADcontract · Last action 2023-09-07$52,820
- Department of DefenseSHAFT LATHE REPAIRcontract · Last action 2022-07-12$48,240
- Department of DefenseUPGRADE/REBUILD BETTS STEADY REST LATHEcontract · Last action 2023-06-16$44,912
- Department of DefenseIGF::OT::IGF LATHE SERVICEScontract · Last action 2015-01-29$38,022
- Department of Defense8510432502!IPE - COMPONENTScontract · Last action 2024-02-23$35,884
- Department of DefenseIGF::OT::IGF MAINTENANCE SHAFT LATHEcontract · Last action 2015-08-25$34,668
- Department of DefensePARTS FOR DRAG BRAKE SYSTEMcontract · Last action 2012-08-06$31,373
- Department of DefenseSERIVCE TO SAND 3 BED WAY SECTIONS FOR A LATHE.contract · Last action 2011-07-08$29,400
- Department of DefenseBETTS SHAFT LATHEcontract · Last action 2024-09-27$26,694
- Department of DefenseBETTES SHAFT LATHE EVALUATIONcontract · Last action 2019-04-13$22,641
- Department of DefenseBETTS SHAFT LATHE REPAIRcontract · Last action 2024-02-29$20,350
- Department of DefenseLATHE CENTERScontract · Last action 2021-04-22$19,048
- Department of DefenseLATHE SAFETY GATEScontract · Last action 2025-07-09$17,317
- Department of DefenseIGF::OT::IGF REPAIR TAILSTOCK QUILLcontract · Last action 2015-01-30$14,482
- Department of DefenseCONTRACTOR TO INVESTIGATE LATHE DRIVE IN EGYPT TO DETERMINE FUTURE COSTS FOR REBUILD.contract · Last action 2012-01-30$13,745
- Department of DefenseONSITE REPAIR OF RD&D INDUSTRIAL EQUIPMENT.contract · Last action 2012-07-31$13,086
- Department of DefenseLATHE TAILSTOCKcontract · Last action 2017-09-11$11,614
- Department of DefenseN4215842740054 BEARINGS, RADIAL&THRUSTcontract · Last action 2014-10-10$8,565
- Department of DefenseLATHE LEVELING ANALYSIS AND CORRECTIONScontract · Last action 2023-05-22$8,540
- Department of DefenseIGF::OT::IGF OPEN AND INSPECT OF THE BETTS TAILSTOCK QUILL FOR FARREL LATTE; MODEL 60contract · Last action 2014-09-24$7,875
Federal contract dollars to this establishment. Primary NAICS: 333517 - MACHINE TOOL MANUFACTURING. Last action: 2026-01-23. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2023-05-01 | Planned | 4 | 4 | $9,962 | |
| 2010-08-27 | Follow-up | 0 | — | $0 | |
| 2010-03-25 | Complaint | 6 | 6 | $1,450 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine tool manufacturing within NY, ordered by federal enforcement volume:
- CUSTOM LASER, INCLOCKPORT — 1 federal enforcement record
- FIVE STAR TOOL CO., INC.ROCHESTER — 1 federal enforcement record
- VOSS MANUFACTURING, INC.SANBORN — 1 federal enforcement record
- NEW ROCHELLE PRECISION GRINDING CORP.PELHAM — 1 federal enforcement record
- ADVANCED MACHINE DESIGN CO.BUFFALO — 1 federal enforcement record
Related searches
- Machine Tool ManufacturingAll employers in this industry
- Employers in NYState-wide enforcement data
- Machine Tool Manufacturing in NYIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on MACHINE TOOL RESEARCH INC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is MACHINE TOOL RESEARCH INC's OSHA violation history?
- MACHINE TOOL RESEARCH INC has 3 OSHA inspections on record with 10 violations and $11,411.5 in total penalties.
- How does MACHINE TOOL RESEARCH INC's safety record compare to its industry?
- MACHINE TOOL RESEARCH INC operates in the machine tool manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.3. MACHINE TOOL RESEARCH INC's self-reported DART rate is 0 compared to an industry average of 1.2.