Skip to main content

Establishment profile

M&M METALS

103 BRANIFF DRIVE, SAN ANTONIO, TX, 78216
332999All Other Miscellaneous Fabricated Metal Product Manufacturing

Download as PDF →

OSHA inspections
4
over 45 years
Violations
9
$23,201 in penalties
Penalties
$23,201
$2,578 avg
Accident investigations on record
1 National Emphasis Program inspections · 2 OSHA follow-ups

Summary

M&M METALS has accumulated 9 OSHA violations across 4 inspections over 45 years of recorded history, with $23,201 in total assessed penalties.

The establishment sits in the 77th percentile for violations within its industry-state peer group of 619 employers. Inspection frequency runs at the 92nd percentile. The most recent enforcement activity was recorded 11 months ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

M&M METALS appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
4
0.1 / yr · last 45 yrs
Violations
9
0.2 / yr
Penalties
$23,201
$2,578 avg / violation
Inspection trigger · referral
2 of 4
Inspection trigger · planned
2 of 4

75% of inspections at this establishment produced violations,

Peer comparison

77th

Above average violations in NAICS 3329 within TX. Peer group: 619 employers. This establishment has 9 OSHA violations; peer median is 3.

Fewer violationsMore violations
Penalty percentile
91st
peer median: $3,699
Inspection frequency
92nd
peer median: 1

Safety self-report (OSHA 300A)

Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.

DART rate
6.1
vs industry
+4.7
TRIR
9.1
vs industry
+6.5

Reported for 69 average annual employees at this establishment.

Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.

Industry benchmark

Industry avg TRIR
2.6
BLS SOII 2024
Industry avg DART
1.4
BLS SOII 2024
Self-reported TRIR
9.1
OSHA ITA Form 300A (employer self-reported)

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
2
Referral
2

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for M&M METALS. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
11 months ago

Most recent federal enforcement activity recorded 11 months ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for M&M METALS. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for M&M METALS. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for M&M METALS. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for M&M METALS. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for M&M METALS. Verify directly with Environmental Protection Agency

EPA-registered facilities

Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 3 facilities.

FacilityPermitsStatusInspectionsFormal actionsPenaltiesLast inspectedECHO
M&M METALS
103 BRANIFF DR · SAN ANTONIO, TX, 78216
WaterNo Violation Identified00View →
M&M METALS
107 BRANIFF DR · SAN ANTONIO, TX, 78216
WaterNo Violation Identified00View →
M&M METALS
114 W TURBO DR · SAN ANTONIO, TX, 78216
WaterNo Violation Identified00View →

Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for M&M METALS. Verify directly with UVA Corporate Prosecution Registry

Federal contracts

This location

Obligated (5-yr)
$0
Obligated (all-time)
$24K
Awards
4
Top agency
Department of Justice
$19K
Top agencies by obligation (this location)
Department of Justice$19K
Department of Defense$3K
Department of Veterans Affairs$1K
Largest awards
  • Department of Justice
    STAINLESS STEEL SHOWER INSERTS
    contract · Last action 2009-03-19
    $19,040
  • Department of Defense
    INSTALLATION OF DOWNDRAFT TABLES
    contract · Last action 2013-05-10
    $3,358
  • Department of Veterans Affairs
    FABRICATE IRONER FOLD TUBE, FROM STAINLESS STEEL,
    contract · Last action 2008-07-23
    $700
  • Department of Veterans Affairs
    FABRICATE IRONER FOLD TUBE, FROM STAINLESS STEEL,
    contract · Last action 2008-06-27
    $700

Federal contract dollars to this establishment. Primary NAICS: 332322 - SHEET METAL WORK MANUFACTURING. Last action: 2013-05-10. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.

Inspection history

DateTriggerViolationsSeriousPenalty
2025-07-23Referral2$1,000
2025-07-11Planned6$21,201
2010-05-17Referral1$1,000
1980-09-18Planned0$0

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in all other miscellaneous fabricated metal product manufacturing within TX, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on M&M METALS from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is M&M METALS's OSHA violation history?
M&M METALS has 4 OSHA inspections on record with 9 violations and $23,201 in total penalties.
How does M&M METALS's safety record compare to its industry?
M&M METALS operates in the all other miscellaneous fabricated metal product manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.6. M&M METALS's self-reported DART rate is 6.07 compared to an industry average of 1.4.