Establishment profile
LAMAR TOOL & DIE CASTING, INC.
4230 TECHNOLOGY DRIVE, MODESTO, CA, 95356
333514 — Special Die and Tool, Die Set, Jig, and Fixture Manufacturing
EIN 770562972
Summary
LAMAR TOOL & DIE CASTING, INC. has accumulated 16 OSHA violations across 7 inspections over 31 years of recorded history, with $26,360 in total assessed penalties.
The establishment sits in the 95th percentile for violations within its industry-state peer group of 168 employers. Inspection frequency runs at the 99th percentile. The most recent enforcement activity was recorded 3 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
LAMAR TOOL & DIE CASTING, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
71% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Peer comparison
Worse on violations than nearly every other employer in NAICS 3335 within CA. Peer group: 168 employers. This establishment has 16 OSHA violations; peer median is 3.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 45 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for LAMAR TOOL & DIE CASTING, INC.. Verify directly with Occupational Safety and Health Administration →
OSHA accident events
Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.
| Date | Event | Injuries | Hospitalized | Fatalities | |
|---|---|---|---|---|---|
| Sep 5, 1995 | DIE,THUMB,CRUSHED,DIE CASTING MACHINE,MECH MALFUNCTION | 1 | — | — |
Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.
Activity timeline
No federal enforcement activity has been recorded against this establishment in 3+ years. Most recent activity: 3 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for LAMAR TOOL & DIE CASTING, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for LAMAR TOOL & DIE CASTING, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for LAMAR TOOL & DIE CASTING, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for LAMAR TOOL & DIE CASTING, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for LAMAR TOOL & DIE CASTING, INC.. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
LAMAR TOOL & DIE CASTING INC 4230 TECHNOLOGY DR. · MODESTO, CA, 95356 | WaterRCRA | No Violation Identified | 0 | 0 | — | — | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for LAMAR TOOL & DIE CASTING, INC.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2023-03-15 | Planned | 8 | 4 | $20,685 | |
| 2021-12-22 | Complaint | 4 | — | $1,225 | |
| 2014-07-17 | Unprogrammed Related | 0 | — | $0 | |
| 1995-09-13 | Accident | 1 | 1 | $4,000 | |
| 1995-04-11 | Complaint | 1 | — | $0 | |
| 1994-10-18 | Complaint | 0 | — | $0 | |
| 1994-08-09 | Complaint | 2 | — | $450 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in special die and tool, die set, jig, and fixture manufacturing within CA, ordered by federal enforcement volume:
- EDRO ENGINEERING, INC.WALNUT — 2 federal enforcement records
- SAN DIEGO DIE CUTTING, INC.SAN DIEGO — 1 federal enforcement record
- PACIFIC DIE CUT INDUSTRIESHAYWARD — 1 federal enforcement record
- HARRINGTON ASSOCIATED IND INC DBA HARRINGTON MOLDONTARIO — 1 federal enforcement record
- LAMAR TOOLS & DIE CASTING INC.MODESTO — 1 federal enforcement record
- PRECISION DIE CUTTING, INC.SAN LEANDRO — 1 federal enforcement record
- PACIFIC WEST COAST DIES INC.TURLOCK — 1 federal enforcement record
- JENKOR, LLCCERES — 1 federal enforcement record
Related searches
- Special Die and Tool, Die Set, Jig, and Fixture ManufacturingAll employers in this industry
- Employers in CAState-wide enforcement data
- Special Die and in CAIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on LAMAR TOOL & DIE CASTING, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is LAMAR TOOL & DIE CASTING, INC.'s OSHA violation history?
- LAMAR TOOL & DIE CASTING, INC. has 7 OSHA inspections on record with 16 violations and $26,360 in total penalties.
- How does LAMAR TOOL & DIE CASTING, INC.'s safety record compare to its industry?
- LAMAR TOOL & DIE CASTING, INC. operates in the special die and tool, die set, jig, and fixture manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.8. LAMAR TOOL & DIE CASTING, INC.'s self-reported DART rate is 0.02 compared to an industry average of 1.4.