Skip to main content

Establishment profile

L&R MANUFACTURING COMPANY

577 ELM STREET, KEARNY, NJ, 07032
335999All Other Miscellaneous Electrical Equipment and Component Manufacturing

Download as PDF →

OSHA inspections
4
over 42 years
Violations
21
$12,075 in penalties
Penalties
$12,075
$575 avg
Accident investigations on record
1 National Emphasis Program inspections · 1 OSHA follow-up

Summary

L&R MANUFACTURING COMPANY has accumulated 21 OSHA violations across 4 inspections over 42 years of recorded history, with $12,075 in total assessed penalties.

The establishment sits in the 89th percentile for violations within its industry-state peer group of 39 employers. Inspection frequency runs at the 87th percentile. The most recent enforcement activity was recorded 3 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

L&R MANUFACTURING COMPANY appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls.

OSHA workplace safety

Inspections
4
0.1 / yr · last 42 yrs
Violations
21
0.5 / yr
Penalties
$12,075
$575 avg / violation
62% serious38% other
Inspection trigger · complaint
1 of 4
Inspection trigger · referral
1 of 4

50% of inspections at this establishment produced violations,

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 20 citations in this view · $12,075 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0134 C0111$3,150Mar 2016Mar 2016
29 CFR 1910.1026 I04 I11$2,625Mar 2016Mar 2016
29 CFR 1910.1200 E0111$2,100Mar 2016Mar 2016
29 CFR 1910.0305 G02 III11$2,100Mar 2016Mar 2016
29 CFR 1910.0303 B0211$2,100Mar 2016Mar 2016
29 CFR 1910.1200 H0111Mar 2016Mar 2016
29 CFR 1910.0134 E0111Mar 2016Mar 2016
29 CFR 1910.0134 F0211Mar 2016Mar 2016
29 CFR 1910.0134 K0111Mar 2016Mar 2016
29 CFR 1910.0134 K0611Mar 2016Mar 2016
29 CFR 1910.1026 D0111Mar 2016Mar 2016
29 CFR 1910.1026 J01 I11Mar 2016Mar 2016
29 CFR 1910.1200 G0111Mar 2016Mar 2016
29 CFR 1910.0134 C02 II11Mar 2016Mar 2016
29 CFR 1910.0133 A0111Aug 1984Aug 1984
29 CFR 1910.0037 Q0511Aug 1984Aug 1984
29 CFR 1910.0037 Q0111Aug 1984Aug 1984
29 CFR 1910.0037 K0211Aug 1984Aug 1984
29 CFR 1910.0023 C0111Aug 1984Aug 1984
29 CFR 1910.0025 D02 I11Aug 1984Aug 1984

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

89th

Worse on violations than most other employers in NAICS 3359 within NJ. Peer group: 39 employers. This establishment has 21 OSHA violations; peer median is 3.

Fewer violationsMore violations
Penalty percentile
84th
peer median: $2,200
Inspection frequency
87th
peer median: 1

Safety self-report (OSHA 300A)

Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.

DART rate
1.4
vs industry
+0.7
TRIR
5.4
vs industry
+4.0

Reported for 73 average annual employees at this establishment.

Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.

Industry benchmark

Industry avg TRIR
1.4
BLS SOII 2024
Industry avg DART
0.7
BLS SOII 2024
Self-reported TRIR
5.4
OSHA ITA Form 300A (employer self-reported)

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
1
Complaint
1
Referral
1
Follow-up
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for L&R MANUFACTURING COMPANY. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
3 years ago

No federal enforcement activity has been recorded against this establishment in 3+ years. Most recent activity: 3 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for L&R MANUFACTURING COMPANY. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for L&R MANUFACTURING COMPANY. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for L&R MANUFACTURING COMPANY. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for L&R MANUFACTURING COMPANY. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for L&R MANUFACTURING COMPANY. Verify directly with Environmental Protection Agency

Motor carrier safety (FMCSA)

DOT number
135414
Operation
B

Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.

Federal contracts

This location

Obligated (5-yr)
$11K
Obligated (all-time)
$823K
Awards
109
Top agency
Department of Defense
$621K
Top agencies by obligation (this location)
Department of Defense$621K
Department of Justice$70K
Department of Homeland Security$59K
Department of Transportation$40K
General Services Administration$12K

Federal contract dollars to this establishment. Primary NAICS: 337215 - SHOWCASE, PARTITION, SHELVING, AND LOCKER MANUFACTURING. Last action: 2025-11-26. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.

Inspection history

DateTriggerViolationsSeriousPenalty
2023-01-04Referral0$0
2017-09-08Follow-up0$0
2015-11-24Complaint1413$12,075
1984-08-03Planned7$0

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in all other miscellaneous electrical equipment and component manufacturing within NJ, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on L&R MANUFACTURING COMPANY from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is L&R MANUFACTURING COMPANY's OSHA violation history?
L&R MANUFACTURING COMPANY has 4 OSHA inspections on record with 21 violations and $12,075 in total penalties.
How does L&R MANUFACTURING COMPANY's safety record compare to its industry?
L&R MANUFACTURING COMPANY operates in the all other miscellaneous electrical equipment and component manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 1.4. L&R MANUFACTURING COMPANY's self-reported DART rate is 1.36 compared to an industry average of 0.7.