Establishment profile
KENMODE TOOL AND ENGINEERING, INC.
820 W. ALGONQUIN ROAD, ALGONQUIN, IL, 60102
EIN 362426263
Summary
KENMODE TOOL AND ENGINEERING, INC. has accumulated 9 OSHA violations across 5 inspections over 44 years of recorded history, with $9,396 in total assessed penalties.
The establishment sits in the 50th percentile for violations within its industry-state peer group of 232 employers. Inspection frequency runs at the 69th percentile. The most recent enforcement activity was recorded 10 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
KENMODE TOOL AND ENGINEERING, INC. appears in OSHA workplace safety and EPA environmental compliance records only. No matching records were found in WHD wage enforcement, MSHA mine safety, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
60% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 9 distinct standards shown · 9 citations in this view · $9,396 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0147 C04 II | 1 | 1 | $3,465 | Dec 2015 | Dec 2015 |
| 29 CFR 1910.0217 C02 I A | 1 | 1 | $3,465 | Dec 2015 | Dec 2015 |
| 29 CFR 1910.0147 C07 I | 1 | 1 | $2,466 | Dec 2015 | Dec 2015 |
| 29 CFR 1910.0217 D09 IV | 1 | 1 | — | Dec 2015 | Dec 2015 |
| 29 CFR 1910.0147 D | 1 | 1 | — | Dec 2015 | Dec 2015 |
| 29 CFR 1910.0217 C02 IA | 1 | 1 | — | Sep 1981 | Sep 1981 |
| 29 CFR 1910.0217 C02 IB | 1 | 1 | — | Sep 1981 | Sep 1981 |
| 29 CFR 1910.0217 C02 III | 1 | 1 | — | Sep 1981 | Sep 1981 |
| 29 CFR 1904.0005 A | 1 | 1 | — | Sep 1981 | Sep 1981 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Above average violations in NAICS 3321 within IL. Peer group: 232 employers. This establishment has 9 OSHA violations; peer median is 9.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 135 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
Self-reported events under 29 CFR 1904.39 (24-hour notification of hospitalization, amputation, or loss of an eye) · Jun 2015 – Dec 2017
Most frequent event: Caught in running equipment or machinery during regular operation
Source: OSHA Severe Injury Reports (federal OSHA only; state-plan states like California, Oregon, and Washington maintain their own programs and do not consistently report into this feed).
Severe injury reports — events
Each row is a hospitalization, amputation, or eye-loss event the employer self-reported to OSHA under 29 CFR 1904.39. Narratives are written by the reporting employer.
| Date | Event | Body part | Outcome | |
|---|---|---|---|---|
| Dec 14, 2017 | Contact with objects and equipment, unspecified | Finger(s), fingernail(s), unspecified | Hospitalized | |
| Jun 30, 2015 | Caught in running equipment or machinery during regular operation | Finger(s), fingernail(s), n.e.c. | Amputation |
Source: OSHA Severe Injury Reports. Federal-OSHA jurisdiction only by default; some state-plan programs report voluntarily.
Activity timeline
No federal enforcement activity has been recorded against this establishment in 10+ years. Most recent activity: 10 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for KENMODE TOOL AND ENGINEERING, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for KENMODE TOOL AND ENGINEERING, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for KENMODE TOOL AND ENGINEERING, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for KENMODE TOOL AND ENGINEERING, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
EPA Enforcement and Compliance History — Clean Air Act, Clean Water Act, RCRA, Safe Drinking Water Act. Status: No Violation Identified.
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
KENMODE TOOL & ENGINEERING 820 W ALGONQUIN RD · ALGONQUIN, IL, 60102 | AirWaterRCRA | No Violation Identified | 2 | 0 | — | May 2026 | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for KENMODE TOOL AND ENGINEERING, INC.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2015-07-07 | Referral | 5 | 5 | $9,396 | |
| 1986-03-24 | Planned | 0 | — | $0 | |
| 1983-03-24 | Planned | 0 | — | $0 | |
| 1981-09-22 | Planned | 3 | — | $0 | |
| 1981-08-05 | Complaint | 1 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in this industry within IL, ordered by federal enforcement volume:
- SET ENTERPRISES, INC.SAUK VILLAGE — 4 federal enforcement records
- EATON ELECTRICAL INC.LINCOLN — 3 federal enforcement records
- ACCURATE PERFORATING COMPANYCHICAGO — 2 federal enforcement records
- PRINCIPAL MANUFACTURING CORP.BROADVIEW — 2 federal enforcement records
- MJ CELCO, INC.SCHILLER PARK — 2 federal enforcement records
- RTM TREND INC.FRANKLIN PARK — 2 federal enforcement records
- INTERPLEX DAYSTAR, INC.FRANKLIN PARK — 2 federal enforcement records
- ALPHA PRODUCTS, INC.CHICAGO — 2 federal enforcement records
- THE LINE GROUP, INC.ARLINGTON HTS — 2 federal enforcement records
- PETERSON MANUFACTURING CO., INC.PLAINFIELD — 2 federal enforcement records
Related searches
- NAICS 332All employers in this industry
- Employers in ILState-wide enforcement data
- Industry in ILIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on KENMODE TOOL AND ENGINEERING, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is KENMODE TOOL AND ENGINEERING, INC.'s OSHA violation history?
- KENMODE TOOL AND ENGINEERING, INC. has 5 OSHA inspections on record with 9 violations and $9,396 in total penalties.