Establishment profile
KEMCO TOOL & MACHINE INC.
615 RUDDER ROAD, FENTON, MO, 63026
332710 — Machine Shops
Summary
KEMCO TOOL & MACHINE INC. has accumulated 29 OSHA violations across 9 inspections over 51 years of recorded history, with $695 in total assessed penalties.
The establishment sits in the 97th percentile for violations within its industry-state peer group of 259 employers. Inspection frequency runs at the 99th percentile. The most recent enforcement activity was recorded 23 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
KEMCO TOOL & MACHINE INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
44% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 22 citations in this view · $695 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0219 D01 | 3 | 3 | $200 | Feb 1975 | Feb 1985 |
| 29 CFR 1910.1000 A02 | 1 | 1 | $270 | Feb 1985 | Feb 1985 |
| 29 CFR 1910.0178 L | 1 | 1 | $180 | Feb 1985 | Feb 1985 |
| 29 CFR 1910.0212 A03 II | 1 | 1 | $45 | Feb 1975 | Feb 1975 |
| 29 CFR 1910.0106 E02 II | 1 | 1 | — | Feb 1985 | Feb 1985 |
| 29 CFR 1910.0151 B | 1 | 1 | — | Feb 1985 | Feb 1985 |
| 29 CFR 1910.0157 G01 | 1 | 1 | — | Feb 1985 | Feb 1985 |
| 29 CFR 1910.0178 P01 | 1 | 1 | — | Feb 1985 | Feb 1985 |
| 29 CFR 1910.0178 Q07 | 1 | 1 | — | Feb 1985 | Feb 1985 |
| 29 CFR 1910.0184 E01 | 1 | 1 | — | Feb 1985 | Feb 1985 |
| 29 CFR 1910.0184 E03 I | 1 | 1 | — | Feb 1985 | Feb 1985 |
| 29 CFR 1910.0212 A01 | 1 | 1 | — | Feb 1985 | Feb 1985 |
| 29 CFR 1910.0022 B01 | 1 | 1 | — | Feb 1985 | Feb 1985 |
| 29 CFR 1910.0037 K02 | 1 | 1 | — | Feb 1985 | Feb 1985 |
| 29 CFR 1910.0037 Q01 | 1 | 1 | — | Feb 1985 | Feb 1985 |
| 29 CFR 1910.0038 A01 | 1 | 1 | — | Feb 1985 | Feb 1985 |
| 29 CFR 1910.0252 A02 IVC | 1 | 1 | — | Feb 1985 | Feb 1985 |
| 29 CFR 1910.0305 A02 IIIB | 1 | 1 | — | Feb 1985 | Feb 1985 |
| 29 CFR 1910.0305 E01 | 1 | 1 | — | Feb 1985 | Feb 1985 |
| 29 CFR 1910.0305 G01 III | 1 | 1 | — | Feb 1985 | Feb 1985 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer in NAICS 3327 within MO. Peer group: 259 employers. This establishment has 29 OSHA violations; peer median is 3.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for KEMCO TOOL & MACHINE INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for KEMCO TOOL & MACHINE INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 23+ years. Most recent activity: 23 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for KEMCO TOOL & MACHINE INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for KEMCO TOOL & MACHINE INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for KEMCO TOOL & MACHINE INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for KEMCO TOOL & MACHINE INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for KEMCO TOOL & MACHINE INC.. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
KEMCO TOOL & MACHINE CO 615 RUDDER RD · FENTON, MO, 63026 | RCRA | No Violation Identified | 0 | 0 | — | — | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for KEMCO TOOL & MACHINE INC.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2003-03-20 | Planned | 0 | — | $0 | |
| 1985-11-19 | Follow-up | 0 | — | $0 | |
| 1985-06-12 | Follow-up | 0 | — | $0 | |
| 1985-01-22 | Complaint | 2 | 2 | $270 | |
| 1985-01-22 | Complaint | 20 | 3 | $180 | |
| 1982-09-23 | Planned | 0 | — | $0 | |
| 1980-12-03 | Follow-up | 1 | 1 | $200 | |
| 1975-03-07 | Follow-up | 0 | — | $0 | |
| 1975-02-07 | Planned | 6 | — | $45 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within MO, ordered by federal enforcement volume:
- LMI AEROSPACE INC.WASHINGTON — 2 federal enforcement records
- O & F MACHINE PRODUCTS COMPANYJOPLIN — 2 federal enforcement records
- TUELL TOOL COMPANY INC.FERGUSON — 2 federal enforcement records
- PAVYER PRINTING MACHINE WORKSST. LOUIS — 2 federal enforcement records
- SOUTH SIDE MACHINE WORKS INC.SAINT LOUIS — 2 federal enforcement records
- KUHAR METALLIZING COMPANY, INC.KANSAS CITY — 2 federal enforcement records
- ENVISION TECH, INC.SAINT JOSEPH — 2 federal enforcement records
- HEITZ MACHINE & MANUFACTURINGMARYLAND HEIGHTS — 2 federal enforcement records
- R.M. INDUSTRIES, INC.PURDY — 1 federal enforcement record
- M G MACHINE INCBELTON — 1 federal enforcement record
Related searches
- Machine ShopsAll employers in this industry
- Employers in MOState-wide enforcement data
- Machine Shops in MOIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on KEMCO TOOL & MACHINE INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is KEMCO TOOL & MACHINE INC.'s OSHA violation history?
- KEMCO TOOL & MACHINE INC. has 9 OSHA inspections on record with 29 violations and $695 in total penalties.
- How does KEMCO TOOL & MACHINE INC.'s safety record compare to its industry?
- KEMCO TOOL & MACHINE INC. operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7.