Establishment profile
Kanawha Scales and Systems, Inc.
111 Jacobson Drive, POCA, WV, 25159
333997 — Scale and Balance Manufacturing
Summary
Kanawha Scales and Systems, Inc. has no OSHA inspection history on file. Federal records covering wage, environmental, labor relations, and other agencies are noted below where present.
The most recent federal enforcement activity was recorded 0 days ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
Kanawha Scales and Systems, Inc. appears in MSHA mine safety, EPA environmental compliance, and FMCSA motor carrier registration records only. No matching records were found in OSHA workplace safety, WHD wage enforcement, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
No OSHA inspections, citations, or accidents on file for Kanawha Scales and Systems, Inc.. Verify directly with Occupational Safety and Health Administration →
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 87 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
OSHA severe injury reports
Self-reported events under 29 CFR 1904.39 (24-hour notification of hospitalization, amputation, or loss of an eye) · Aug 2023
Most frequent event: Pedestrian struck by vehicle backing up in nonroadway area
Source: OSHA Severe Injury Reports (federal OSHA only; state-plan states like California, Oregon, and Washington maintain their own programs and do not consistently report into this feed).
Severe injury reports — events
Each row is a hospitalization, amputation, or eye-loss event the employer self-reported to OSHA under 29 CFR 1904.39. Narratives are written by the reporting employer.
| Date | Event | Body part | Outcome | |
|---|---|---|---|---|
| Aug 25, 2023 | Pedestrian struck by vehicle backing up in nonroadway area | Thigh(s) | Hospitalized |
Source: OSHA Severe Injury Reports. Federal-OSHA jurisdiction only by default; some state-plan programs report voluntarily.
Activity timeline
Most recent federal enforcement activity recorded 0 days ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for Kanawha Scales and Systems, Inc.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
Company-level in WV — for Kanawha Scales and Systems, Inc., not this location alone
Mine Safety & Health Administration — citations issued at mining operations. MSHA records cases at the company/regional level (no worksite address), so these are matched by company name and state and may span other Kanawha Scales and Systems, Inc. operations in the same state.
MSHA citations
Mine Safety and Health Administration citations. S&S (significant and substantial) marks violations that could reasonably contribute to a serious injury. Negligence rating is MSHA’s operator-culpability assessment (none, low, moderate, high, or reckless disregard). Proposed = assessed at issuance; Paid = post-settlement / appeal. 4 citations · 3S&S · 4 contractor · $470 proposed / $470 paid.
| Citation | Mine | Date | Section | S&S | Negligence | Proposed | Paid |
|---|---|---|---|---|---|---|---|
| 8106925 | Minway No. 1 Mingo, WV contractor: Kanawha Scales & Systems, Inc. | Jul 2010 | — | Yes | ModNegligence | $243 | $243 |
| 8106924 | Minway No. 1 Mingo, WV contractor: Kanawha Scales & Systems, Inc. | Jul 2010 | — | Yes | ModNegligence | $100 | $100 |
| 7262505 | Odell Processing Laurel Loadout Logan, WV contractor: Kanawha Scales & Systems, Inc. | Mar 2007 | — | Yes | ModNegligence | $72 | $72 |
| 7204060 | Chess Processing Boone, WV contractor: Kanawha Scales & Systems, Inc. | May 2002 | — | No | HighNegligence | $55 | $55 |
Source: MSHA citation database. “Contractor” annotations indicate the cited party was on-site at the mine but not the mine’s operator -- responsibility attaches to the contractor LLC, not the mine’s owner. Section codes reference 30 CFR (the Mine Safety and Health regulations).
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for Kanawha Scales and Systems, Inc.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for Kanawha Scales and Systems, Inc.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
EPA Enforcement and Compliance History — Clean Air Act, Clean Water Act, RCRA, Safe Drinking Water Act. Status: No Violation Identified.
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
KANAWHA SCALES AND SYSTEMS 111 JACOBSON DR · POCA, WV, 25159 | RCRA | No Violation Identified | 1 | 0 | — | May 2025 | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for Kanawha Scales and Systems, Inc.. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of DefenseEMERGENCY GATE LOAD INDICATING AND ALARM SYSTEM FOR WINFIELD LOCKS AND DAM, WV.contract · Last action 2010-09-30$65,400
- Department of DefenseSCALE LABELER AND WRAPPER FOR THE MITCHEL FIELD COMMISSARYcontract · Last action 2021-08-26$38,000
- Department of Defense1M28 SCALE LABELER WRAPPER, AUTO CONUScontract · Last action 2021-08-03$35,500
- Department of Defense1M28 SCALE LABELER WRAPPER, AUTO CONUScontract · Last action 2021-08-03$28,000
- Department of the TreasuryHIGH PRECISION SCALEcontract · Last action 2012-05-16$10,076
- Department of DefenseQUOTE # DAY-4853contract · Last action 2010-11-10$9,875
- Department of DefenseREPAIRS OF WEIGHT SCALES AT CAJMTCcontract · Last action 2018-09-11$8,325
- Department of Defense1M30 SCALE LABELER WRAPPER STATIONcontract · Last action 2021-12-29$7,837
- Department of Veterans AffairsWAREHOUSE DOCK SCALEcontract · Last action 2013-10-02$7,075
- Department of DefenseREPAIRS NEEDED ON THE ISHIDA WRAPPER EQUIPMENT OUT-OF-SCOPEcontract · Last action 2022-12-21$6,877
- Department of DefenseTHE CONTRACTOR SHALL PROVIDE AND INSTALL DIGITAL CONTROLLER FOR WINFIELD LOCK AND DAM, WINFIELD, WV.contract · Last action 2015-06-26$6,775
- Department of the InteriorWIPFRAG SOFTWARE REQ 40005784contract · Last action 2011-04-27$6,000
- Department of Defense4SPPM SCALE/PRINTER STAND-ALONE CONUScontract · Last action 2022-07-14$5,446
- Department of DefenseWRAPPER SCALE/PRINTER STAND-ALONEcontract · Last action 2021-08-24$5,446
- Department of Veterans AffairsTEST WEIGHTS FOR PATIENT SCALEScontract · Last action 2011-07-20$4,350
- Department of Veterans AffairsADJUST SCALES ON 8142 DIGITAL SCALES IN LAUNDRYcontract · Last action 2008-07-22$375
- Department of DefenseSCALE LABELER WRAPPER AUTOcontract · Last action 2022-09-16$0
- Department of Veterans AffairsNX EQ - ANALYTICAL BALANCEScontract · Last action 2021-09-27$0
Federal contract dollars to this establishment. Primary NAICS: 333997 - SCALE AND BALANCE MANUFACTURING (2007), SCALE AND BALANCE (EXCEPT LABORATORY) MANUFACTURING (2002). Last action: 2022-12-21. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
In the news
Other employers in this industry and state
Other employers in scale and balance manufacturing within WV, ordered by federal enforcement volume:
- AMERICAN EQUIPMENT SYSTEMS, LLCPOCA — 1 federal enforcement record
Related searches
- Scale and Balance ManufacturingAll employers in this industry
- Employers in WVState-wide enforcement data
- Scale and Balance in WVIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on Kanawha Scales and Systems, Inc. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is Kanawha Scales and Systems, Inc.'s OSHA violation history?
- Kanawha Scales and Systems, Inc. has no OSHA inspections on record.
- How does Kanawha Scales and Systems, Inc.'s safety record compare to its industry?
- Kanawha Scales and Systems, Inc. operates in the scale and balance manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 1.7. Kanawha Scales and Systems, Inc.'s self-reported DART rate is 0 compared to an industry average of 1.1.