Establishment profile
KAEMPF & HARRIS CUSTOM SHEETMETAL
217-A MONROE AVENUE, FREDERICK, MD, 21701
Summary
KAEMPF & HARRIS CUSTOM SHEETMETAL has accumulated 21 OSHA violations across 2 inspections over 23 years of recorded history, with $2,000 in total assessed penalties.
The establishment sits in the 98th percentile for violations within its industry-state peer group of 38,271 employers. Inspection frequency runs at the 81st percentile. The most recent enforcement activity was recorded 23 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
KAEMPF & HARRIS CUSTOM SHEETMETAL appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 20 citations in this view · $2,000 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0147 C04 I | 1 | 1 | $600 | Nov 2002 | Nov 2002 |
| 29 CFR 1910.0212 A03 II | 1 | 1 | $500 | Nov 2002 | Nov 2002 |
| 29 CFR 1910.0215 B09 | 1 | 1 | $300 | Nov 2002 | Nov 2002 |
| 29 CFR 1910.0179 J02 III | 1 | 1 | $300 | Nov 2002 | Nov 2002 |
| 29 CFR 1910.0132 F01 I | 1 | 1 | $300 | Nov 2002 | Nov 2002 |
| 29 CFR 1910.0095 K01 | 1 | 1 | — | Jan 2003 | Jan 2003 |
| 29 CFR 1910.0095 D01 | 1 | 1 | — | Jan 2003 | Jan 2003 |
| 29 CFR 1910.0095 G01 | 1 | 1 | — | Jan 2003 | Jan 2003 |
| 29 CFR 1910.0095 C01 | 1 | 1 | — | Jan 2003 | Jan 2003 |
| 29 CFR 1910.0179 M01 | 1 | 1 | — | Nov 2002 | Nov 2002 |
| 29 CFR 1910.0215 A04 | 1 | 1 | — | Nov 2002 | Nov 2002 |
| 29 CFR 1904.0032 B02 I | 1 | 1 | — | Nov 2002 | Nov 2002 |
| 29 CFR 1910.0303 G01 II | 1 | 1 | — | Nov 2002 | Nov 2002 |
| 29 CFR 1910.0022 D01 | 1 | 1 | — | Nov 2002 | Nov 2002 |
| 29 CFR 1910.0132 D02 | 1 | 1 | — | Nov 2002 | Nov 2002 |
| 29 CFR 1910.0132 F04 | 1 | 1 | — | Nov 2002 | Nov 2002 |
| 29 CFR 1910.0138 A | 1 | 1 | — | Nov 2002 | Nov 2002 |
| 29 CFR 1910.0147 C06 IA | 1 | 1 | — | Nov 2002 | Nov 2002 |
| 29 CFR 1910.0147 C06 II | 1 | 1 | — | Nov 2002 | Nov 2002 |
| 29 CFR 1910.0147 C07 I | 1 | 1 | — | Nov 2002 | Nov 2002 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer. Peer group: 38,271 employers. This establishment has 21 OSHA violations; peer median is 2.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for KAEMPF & HARRIS CUSTOM SHEETMETAL. Verify directly with OSHA Injury Tracking Application →
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for KAEMPF & HARRIS CUSTOM SHEETMETAL. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 23+ years. Most recent activity: 23 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for KAEMPF & HARRIS CUSTOM SHEETMETAL. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for KAEMPF & HARRIS CUSTOM SHEETMETAL. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for KAEMPF & HARRIS CUSTOM SHEETMETAL. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for KAEMPF & HARRIS CUSTOM SHEETMETAL. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for KAEMPF & HARRIS CUSTOM SHEETMETAL. Verify directly with Environmental Protection Agency →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2002-10-21 | Referral | 4 | — | $0 | |
| 2002-10-10 | Planned | 17 | 9 | $2,000 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Related searches
- Employers in MDState-wide enforcement data
About this data
This profile aggregates federal enforcement records on KAEMPF & HARRIS CUSTOM SHEETMETAL from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is KAEMPF & HARRIS CUSTOM SHEETMETAL's OSHA violation history?
- KAEMPF & HARRIS CUSTOM SHEETMETAL has 2 OSHA inspections on record with 21 violations and $2,000 in total penalties.