Establishment profile
JIT INDUSTRIES, INC.
2201 HIGHWAY 31 SOUTHWEST, HARTSELLE, AL, 35640
333995 — Fluid Power Cylinder and Actuator Manufacturing
Summary
JIT INDUSTRIES, INC. has accumulated 3 OSHA violations across 1 inspection over 2 years of recorded history, with $1,036 in total assessed penalties.
The establishment sits in the 36th percentile for violations within its industry-state peer group of 51 employers. The most recent enforcement activity was recorded 2 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
JIT INDUSTRIES, INC. appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
100% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 3 distinct standards shown · 3 citations in this view · $1,036 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0132 D01 | 1 | 1 | $518 | Oct 2024 | Oct 2024 |
| 29 CFR 1910.0178 L02 II | 1 | 1 | $518 | Oct 2024 | Oct 2024 |
| 29 CFR 1904.0032 A02 | 1 | 1 | — | Oct 2024 | Oct 2024 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Below average violations in NAICS 3339 within AL. Peer group: 51 employers. This establishment has 3 OSHA violations; peer median is 6.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for JIT INDUSTRIES, INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for JIT INDUSTRIES, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 2+ years. Most recent activity: 2 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for JIT INDUSTRIES, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for JIT INDUSTRIES, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for JIT INDUSTRIES, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for JIT INDUSTRIES, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for JIT INDUSTRIES, INC.. Verify directly with Environmental Protection Agency →
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for JIT INDUSTRIES, INC.. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
Consolidated across all USAspending recipient entities under this corporate parent — not attributable to this single location.
- Department of DefenseMANUFACTURE OF ACCUMULATOR CYLINDERScontract · Last action 2009-03-23$493,000
- Department of DefenseNSN:5420 00 050 8734;PART# 13214E0080; NOUN: CYLINDER,HYDRAULIC; QUANTITY 35.contract · Last action 2009-07-15$358,750
- Department of DefenseCYLINDER ASSEMBLYcontract · Last action 2013-11-19$246,979
- Department of DefenseCULVERT VALVES HYDRAULIC ASSEMBLYcontract · Last action 2025-09-24$226,250
- Department of Defense4514043744!CYLINDER ASSEMBLY,Acontract · Last action 2010-04-20$180,756
- Department of Defense4507824051!CYLINDERcontract · Last action 2012-08-07$171,708
- Department of DefenseB4R0540 FURNISH AND DELIVER FOUR HYDRAULIC CYLINDERS.contract · Last action 2008-09-29$163,840
- Department of DefenseCOMPONENTScontract · Last action 2010-02-02$155,195
- Department of DefenseREPAIR OF HYDRAULIC ACCUMULATORcontract · Last action 2016-04-26$125,640
- Department of DefenseHYDRAULIC CYLINDERcontract · Last action 2013-10-07$117,587
- Department of DefenseNSN: 5420-00-050-8733; PART NUMBER: 13214E0070-1; PART NAME: CYLINDER, HYDRAULIC; QUANTITY: 10; OPTION: 100%.contract · Last action 2009-03-01$106,000
- Department of DefenseREFURBISH ONE HYDRAULIC ACTUATOR FOR THEcontract · Last action 2008-08-30$97,898
- Department of Homeland SecurityIGF::OT::IGF NSN: 3040 99-4929 OIR HYDRAULIC ACCUMULATOR NSN: 3040 01-103-6565 OIR CYLINDERcontract · Last action 2018-08-16$86,439
- Department of DefensePPU15 PERSONAL POWER UNIT COREcontract · Last action 2008-08-25$79,998
- Department of DefensePURCHASE OF TWO HYDRAULIC CYLINDERS CAPABLE OF LOAD BEARING OF 500,000 POUNDS.contract · Last action 2023-09-25$75,710
- Department of Defense4507744319!CYLINDERcontract · Last action 2008-05-31$68,517
- Department of DefenseCHENA HYDRAULIC FLOOD GATE HOIST CYLINDER FOR MOOSE CREEK DAMcontract · Last action 2017-03-13$66,923
- Department of DefenseBEARINGS IN ACCORDANCE WITH (IAW) NSN 3110-01-442-6725 AND NSN 3110-01-442-5623contract · Last action 2009-05-04$63,684
- Department of DefenseHYDRAULIC CYLINDERScontract · Last action 2022-02-25$62,000
- Department of Homeland SecurityFOR THE OPEN/INSPECT/REPORT/REPAIR OF 10 CYLINDER, ACTUATING, LINEAR (NSN: 3040-01-441-3721).contract · Last action 2022-01-25$61,099
- Department of Homeland SecurityNSN 3040 01-464-5357, CYLINDER, ACTUATING, LINEAR, 7 EACH, P/N N5C-8X48X4, MFG: HYDRO LINE MANUFACTURING COMPANY. FUNDS FOR THE REPAIR HAVE BEEN PREVIOUSLY FUNDED IN THE AMOUNT OF $56,500.01. OPEN, INSPECT AND REPORT ONLY. IGF::OT::IGFcontract · Last action 2014-07-24$56,675
- Department of DefenseAIR CYLINDERScontract · Last action 2014-08-20$56,219
- Department of Homeland SecurityFOR THE OPEN/INSPECT/REPORT/OVERHAUL OF 12 CYLINDERS (CLIN 1008- 2 EA CLIN 1012- 2 EA CLIN 1015- 2 EA CLIN 1016- 1 EA CLIN 1009- 1 EA CLIN 1020- 4 EA).contract · Last action 2025-01-29$55,196
- Department of Defense4508116101!CYLINDERcontract · Last action 2008-07-16$52,529
- Department of Veterans AffairsELECTRIC VEHICLEcontract · Last action 2018-08-23$43,481
- Department of Defense4506454662!CLEANINGcontract · Last action 2008-01-04$41,612
- Department of DefenseHYDRAULIC CYLINDERS FOR EMSWORTH LOCK AND DAM PITTSBURGH, PAcontract · Last action 2009-12-21$39,960
- Department of Homeland SecurityIGF::OT::IGF NSN: 3040-01-103-6565 OPEN, INSPECT AND REPORTcontract · Last action 2016-02-24$39,896
- Department of DefenseCYLINDER, DOLLY LIFTcontract · Last action 2019-02-27$37,832
- Department of Homeland SecurityNSN: 3040-01-496-9424 ITEM: CYLINDER ASSY, ACTUATINGcontract · Last action 2018-08-09$37,050
- Department of Defense4505931123!CYLINDERcontract · Last action 2007-10-25$35,175
- Department of Defense8500154700!SHAFT ASSEMBLY,FLEXcontract · Last action 2013-03-06$33,573
- Department of DefenseIGF::OT::IGF MPLD CYLINDER REHABcontract · Last action 2019-07-02$33,548
- Department of DefenseCYLINDER USED ON MEDIUM TRUCK ENGINEcontract · Last action 2008-03-07$33,456
- Department of Homeland SecurityOIR "IGF::OT::IGF" 3040-014226785 CYLINDER ASSY 175' WLMcontract · Last action 2016-04-22$33,418
- Department of DefenseDOLLY LIFT CYLINDERcontract · Last action 2011-09-27$30,820
- Department of Homeland SecurityOPEN, INSPECT AND REPAIR CYLINDER ACTUATING LINEARcontract · Last action 2011-11-07$28,500
- National Aeronautics and Space AdministrationMILLER PARKER 2.5 INCH BORE 18 INCH STROKE HYDRAULIC ACTUATOR; 3.25 INCH BORE 12 INCH STROKE HYDRAULIC ACTUATOR; CERTIFIED DRAWING 2.5 INCH BORE 18 INCH STROKE HYDRAULIC ACTUATOR; CERTIFIED DRAWING 3.25 INCH BORE 12 INCH STROKE HYDRAULIC ACTUATORcontract · Last action 2014-12-30$27,173
- Department of DefenseHYDRAULIC CYLINDERS AND ROD EYEScontract · Last action 2017-08-31$25,474
- Department of DefenseNSN: 3040-01-207-1850; ACTUATING LINEAR CYLINDERcontract · Last action 2014-11-13$23,940
- Department of Homeland SecurityNSN 3040 01-472-5943, CYLINDER ASSEMBLY, ACTUATING LN, 2 EACH, P/N CY-6746, MFG: HSI CORPORATION. FUNDS FOR THE REPAIR HAVE BEEN PREVIOUSLY FUNDED IN THE AMOUNT OF $22,571.30. OPEN, INSPECT AND REPORT ONLY. IGF::OT::IGFcontract · Last action 2014-07-28$22,621
- Department of Defense4508505296!PARTS KITcontract · Last action 2012-08-07$20,210
- Department of Homeland SecurityFOR THE CYLINDER, ACTUATING, LINEAR A QTY (4) (NSN: 3040 01-099-2893 CLIN:0015F).contract · Last action 2022-04-27$19,569
- Department of Defense4514677193!ROD,PISTON,LINEAR Acontract · Last action 2010-06-21$19,331
- Department of Homeland SecurityFOR THE OPEN, INSPECT, REPORT, AND OVERHAUL OF THREE (3) CYLINDER, ACTUATING, LINEAR (NSN: 3040-01-464-5357 CLIN: 1016A AND 1016B).contract · Last action 2022-02-22$19,190
- National Aeronautics and Space Administration2 EACH - HV2-84BXN-03.25-006.00-0138-S44T-9 - ACTUATOR, 3.25 INCH BORE 6 INCH STROKE, HV2 - SERIES POSITION SENSING CYLINDER SPECIFICATIONS ARE: NASA DRYDEN FLL E6 HYDRAULIC ACTUATOR SPECIFICATIONS 3.25 INCH BORE 6 INCH STROKE, 6/18/10 PARAMETERS E6 SPECS. (3.25 INCHES BORE 6 INCHES STROKE) ACTUATOR: BORE DIAMETER (INCHES) 3.25 ROD DIAMETER (INCHES) 1.375 ROD END (STYLE 5) 1-14 UNF-3A X 2.00 INCHES EFFECTIVE STROKE (INCHES) 6.0 STOP TUBE - HEAD END (INCHES) NONE MOUNTING STYLE FIXED CLEVIS (EQUIV. TO MILLER MODEL 84-B) MOUNTING PIN (INCHES, +0/-.003) 1.0 CUSHIONS NONE PISTON RING LOW FRICTION, PROPORTIONAL CONTROL PORT TYPE #8 SAE ( INCH-16 FEMALE THREADS) PORT LOCATION HEAD & CAP, POSITION 4 QUICK DISCONNECT TYPE AEROQUIP 5608-8-10S HEAD, 5610-8-10S CAP, OR PARKER EQUIVALENT HYDRAULIC OPERATING PRESSURE (MAX. PSI) 3000 COMPRESSION FORCE* (PUSH; MIN. LBS) 20,400 TENSION FORCE* (PULL; MIN. LBS) 18,400 FLUID TYPE MIL-H-83282C (RED OIL) FLUID TEMP. (NOMINAL) 97 F FLUID TEMP. RANGE 70 F TO 120 F ACTUATOR OPERATING TEMP. RANGE 40 F TO 130 F MANUFACTURER BEST AVAILABLE MODEL EQUIV. TO MILLER SERIES HV2, MODEL 84B PRESSURE TEST CERT. YES LRT: REPEATABILITY (INCHES) 0.001 MAX. NON-LINEARITY (% FS) 0.1 MAX. STROKE (INCHES) 6.0 PRESSURE RATING (PSI; MIN.) 3000 EXCITATION VOLTAGE (DC; MAX.) 10 CONNECTOR LOCATION CAP POSITION 3 (90 FROM PORT) * INCLUDES A MINIMUM FACTOR OF SAFETY OF 3 FOR STRENGTH AND BUCKLING AT FULL STROKE. 4 EACH - HV2-84BXN-06.00-08.00-0250-S44T-9 - 6 INCH BORE X 8 INCH STROKE X 2 1/2 INCH ROD DIAMETER. 6 INCH EFFECTIVE STROKE, HV2-SERIES POSITION SENSING CYLINDER. SPECIFICATIONS ARE: NASA DRYDEN FLL H6 HYDRAULIC ACTUATOR SPECIFICATIONS 6 INCH BORE 6 INCH STROKE, 6/18/09 PARAMETERS H6 SPECS. (6 INCH BORE 6 INCH STROKE) ACTUATOR: BORE DIAMETER (INCHES)6 INCH ROD DIAMETER (INCHES) 2.5 INCH ROD END (STYLE 2) 2.00-12NF-3A X 2.50 EFFECTIVE STROKE (INCHES) 6.0 STOP TUBE - HEAD END (INCHES) 2.0 MOUNTING STYLE FIXED CLEVIS (EQUIV. TO MILLER MODEL 84-B) MOUNTING PIN (INCHES, +0/-.003) 2.00 CUSHIONS NONE PISTON RING LOW FRICTION, PROPORTIONAL CONTROL PORT TYPE #8 SAE ( INCH-16 FEMALE THREADS) PORT LOCATION HEAD & CAP, POSITION 4 QUICK DISCONNECT TYPE AEROQUIP 5608-8-10S HEAD, 5610-8-10S CAP, OR PARKER EQUIVALENT HYDRAULIC OPERATING PRESSURE (MAX. PSI)3000 COMPRESSION FORCE* (PUSH; MIN. LBS) 84,800 TENSION FORCE* (PULL; MIN. LBS) 70,000 FLUID TYPE MIL-H-83282C (RED OIL) FLUID TEMP. (NOMINAL) 97 F FLUID TEMP. RANGE 70 F TO 120 F ACTUATOR OPERATING TEMP. RANGE 40 F TO 130 F MANUFACTURER BEST AVAILABLE MODEL EQUIV. TO MILLER SERIES HV2, MODEL 84B PRESSURE TEST CERT. YES LRT: REPEATABILITY (INCHES) 0.001 MAX. NON-LINEARITY (% FS) 0.1 MAX. STROKE (INCHES) 6.0 PRESSURE RATING (PSI; MIN.) 3000 EXCITATION VOLTAGE (DC; MAX.) 10 CONNECTOR LOCATION CAP POSITION 3 (90 FROM PORT) * INCLUDES A MINIMUM FACTOR OF SAFETY OF 3 FOR STRENGTH AND BUCKLING AT FULL STROKE ITEMS 1 AND 2 ALSO INCLUDE: LOW FRICTION GLAND (ROD BEARING), 30 FOOT ELECTRICAL TRANSDUCER CABLE. CERTIFIED CYLINDER DRAWINGS WILL BE REQUIRED TO BE APPROVED PRIOR TO MANUFACTURING. CYLINDERS SHALL BE STATIC AND DYNAMIC TESTED. STATIC TESTING SHALL BE TO SYSTEM PRESSURE AND DYNAMIC TESTING SHALL BE A MINIMUM OF 10 CYCLES. CYLINDERS SHALL BE SHIPPED FULLY CHARGED AND SHALL INCLUDE A METAL TAG IDENTIFYING PART NUMBER. SPECIFIC TEST REPORTS, PROCEDURES AND WORK INSTRUCTIONS SHALL BE INCLUDED. LRTS TO BE INTERNALLY MOUNTED.contract · Last action 2011-06-02$18,900
- Department of DefenseDOLLY LIFT CYLINDERcontract · Last action 2014-11-26$18,666
- Department of DefenseHYDRAULICS REPAIRcontract · Last action 2009-07-28$18,140
- Department of DefensePROVIDE 6 ITT FABRI-VALVES C37 KNIFE GATE VALVES WITH GV ACTUATORS FOR THE FLOATTING CAISSON, TENNESSEE RIVER OPERATIONS CENTER, FLORENCE, ALcontract · Last action 2013-02-08$17,340
- Department of Defense4510142823!CYLINDER ASSEMBLY,Acontract · Last action 2009-03-06$16,760
Federal contract dollars to this establishment. Primary NAICS: 333995 - FLUID POWER CYLINDER AND ACTUATOR MANUFACTURING. Last action: 2025-10-15. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2024-04-11 | Complaint | 3 | — | $1,036 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in fluid power cylinder and actuator manufacturing within AL, ordered by federal enforcement volume:
- HYCO ALABAMA LLCARAB — 2 federal enforcement records
- R & D ELECTRONICS, INC.BROWNSBORO — 1 federal enforcement record
- HYDRATECH INDUSTRIES FLUID POWER, INC.ROBERTSDALE — 1 federal enforcement record
- ALABAMA HYDRAULIC SERVICES, LLCBIRMINGHAM — 1 federal enforcement record
Related searches
- Fluid Power Cylinder and Actuator ManufacturingAll employers in this industry
- Employers in ALState-wide enforcement data
- Fluid Power Cylinder in ALIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on JIT INDUSTRIES, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is JIT INDUSTRIES, INC.'s OSHA violation history?
- JIT INDUSTRIES, INC. has 1 OSHA inspection on record with 3 violations and $1,036 in total penalties.
- How does JIT INDUSTRIES, INC.'s safety record compare to its industry?
- JIT INDUSTRIES, INC. operates in the fluid power cylinder and actuator manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.2.