Skip to main content

Establishment profile

JEFFREY TURNER AND CURTIS MILLER

9540 SW TIGARD ST, TIGARD, OR, 97223
337110Wood Kitchen Cabinet and Countertop Manufacturing

Download as PDF →

OSHA inspections
3
over 14 years
Violations
7
$1,507 in penalties
Penalties
$1,507
$215 avg
Accident investigations on record
2 National Emphasis Program inspections · 2 OSHA follow-ups

Summary

JEFFREY TURNER AND CURTIS MILLER has accumulated 7 OSHA violations across 3 inspections over 14 years of recorded history, with $1,507 in total assessed penalties.

The establishment sits in the 61st percentile for violations within its industry-state peer group of 439 employers. Inspection frequency runs at the 70th percentile. The most recent enforcement activity was recorded 1 year ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

JEFFREY TURNER AND CURTIS MILLER appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
3
0.2 / yr · last 14 yrs
Violations
7
0.5 / yr
Penalties
$1,507
$215 avg / violation
71% serious29% other
Inspection trigger · complaint
1 of 3
Inspection trigger · planned
1 of 3

67% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 7 distinct standards shown · 7 citations in this view · $1,507 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0178 L0611$1,177Nov 2025Nov 2025
29 CFR 1910.0147 C0111$165Nov 2011Nov 2011
29 CFR 1910.0213 C0111$165Nov 2011Nov 2011
29 CFR 1910.0178 Q0711Nov 2025Nov 2025
29 CFR 1910.0178 P0111Nov 2025Nov 2025
OAR 437-001-0765(13)-111Nov 2025Nov 2025
29 CFR 7010.7651311Nov 2011Nov 2011

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

61st

Above average violations in NAICS 3371 within OR. Peer group: 439 employers. This establishment has 7 OSHA violations; peer median is 5.

Fewer violationsMore violations
Penalty percentile
85th
peer median: $200
Inspection frequency
70th
peer median: 1

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for JEFFREY TURNER AND CURTIS MILLER. Verify directly with OSHA Injury Tracking Application

Industry benchmark

Industry avg TRIR
3.5
BLS SOII 2024
Industry avg DART
2.2
BLS SOII 2024
Self-reported TRIR
Not in OSHA ITA

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
1
Complaint
1
Follow-up
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for JEFFREY TURNER AND CURTIS MILLER. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
1 year ago

Most recent federal enforcement activity recorded 1 year ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for JEFFREY TURNER AND CURTIS MILLER. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for JEFFREY TURNER AND CURTIS MILLER. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for JEFFREY TURNER AND CURTIS MILLER. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for JEFFREY TURNER AND CURTIS MILLER. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for JEFFREY TURNER AND CURTIS MILLER. Verify directly with Environmental Protection Agency

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for JEFFREY TURNER AND CURTIS MILLER. Verify directly with UVA Corporate Prosecution Registry

Inspection history

DateTriggerViolationsSeriousPenalty
2025-06-26Complaint43$1,177
2012-02-08Follow-up0$0
2011-07-19Planned32$330

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in wood kitchen cabinet and countertop manufacturing within OR, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on JEFFREY TURNER AND CURTIS MILLER from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is JEFFREY TURNER AND CURTIS MILLER's OSHA violation history?
JEFFREY TURNER AND CURTIS MILLER has 3 OSHA inspections on record with 7 violations and $1,507 in total penalties.
How does JEFFREY TURNER AND CURTIS MILLER's safety record compare to its industry?
JEFFREY TURNER AND CURTIS MILLER operates in the wood kitchen cabinet and countertop manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.5.