Establishment profile
J K TOOL AND DIE, INC.
321 N. WASHINGTON ROAD, APOLLO, PA, 15613
333514 — Special Die and Tool, Die Set, Jig, and Fixture Manufacturing
Summary
J K TOOL AND DIE, INC. has accumulated 25 OSHA violations across 2 inspections over 23 years of recorded history, with $4,560 in total assessed penalties.
The establishment sits in the 95th percentile for violations within its industry-state peer group of 225 employers. Inspection frequency runs at the 45th percentile. The most recent enforcement activity was recorded 17 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
J K TOOL AND DIE, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 22 citations in this view · $4,560 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0151 C | 2 | 2 | $743 | Feb 2003 | Mar 2009 |
| 29 CFR 1910.0215 B09 | 2 | 2 | $368 | Feb 2003 | Mar 2009 |
| 29 CFR 1910.0147 C01 | 1 | 1 | $700 | Feb 2003 | Feb 2003 |
| 29 CFR 1910.0219 D01 | 1 | 1 | $490 | Feb 2003 | Feb 2003 |
| 29 CFR 1910.0212 A03 II | 1 | 1 | $490 | Feb 2003 | Feb 2003 |
| 29 CFR 1910.0133 A01 | 1 | 1 | $368 | Mar 2009 | Mar 2009 |
| 29 CFR 1910.0178 P01 | 1 | 1 | $368 | Mar 2009 | Mar 2009 |
| 29 CFR 1910.0215 B02 | 1 | 1 | $345 | Feb 2003 | Feb 2003 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $345 | Feb 2003 | Feb 2003 |
| 29 CFR 1910.0178 L01 II | 1 | 1 | $345 | Feb 2003 | Feb 2003 |
| 29 CFR 1910.0108 C05 | 1 | 1 | — | Mar 2009 | Mar 2009 |
| 29 CFR 1910.0132 F02 | 1 | 1 | — | Mar 2009 | Mar 2009 |
| 29 CFR 1910.0147 C06 IA | 1 | 1 | — | Mar 2009 | Mar 2009 |
| 29 CFR 1910.0178 L03 IM | 1 | 1 | — | Mar 2009 | Mar 2009 |
| 29 CFR 1910.0215 A02 | 1 | 1 | — | Mar 2009 | Mar 2009 |
| 29 CFR 1910.0215 D01 | 1 | 1 | — | Mar 2009 | Mar 2009 |
| 29 CFR 1910.0147 C07 I | 1 | 1 | — | Feb 2003 | Feb 2003 |
| 29 CFR 1910.0147 C04 I | 1 | 1 | — | Feb 2003 | Feb 2003 |
| 29 CFR 1910.1200 H01 I | 1 | 1 | — | Feb 2003 | Feb 2003 |
| 29 CFR 1910.0125 F03 | 1 | 1 | — | Feb 2003 | Feb 2003 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer in NAICS 3335 within PA. Peer group: 225 employers. This establishment has 25 OSHA violations; peer median is 4.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for J K TOOL AND DIE, INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for J K TOOL AND DIE, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 17+ years. Most recent activity: 17 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for J K TOOL AND DIE, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for J K TOOL AND DIE, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for J K TOOL AND DIE, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for J K TOOL AND DIE, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for J K TOOL AND DIE, INC.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for J K TOOL AND DIE, INC.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2009-02-24 | Planned | 10 | 8 | $1,500 | |
| 2003-02-03 | Planned | 15 | 10 | $3,060 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in special die and tool, die set, jig, and fixture manufacturing within PA, ordered by federal enforcement volume:
- SHAW INDUSTRIES INC.FRANKLIN — 2 federal enforcement records
- LANEKO ENGINEERING COMPANYFORT WASHINGTON — 2 federal enforcement records
- TOTTSER TOOL & DIE SHOP, INC.HUNTINGDON VALLEY — 2 federal enforcement records
- PHB INC.FAIRVIEW — 2 federal enforcement records
- KEY DIES, INCORPORATEDANNVILLE — 1 federal enforcement record
- TOOL ALL, INC.ERIE — 1 federal enforcement record
- SIPCO, INC.MEADVILLE — 1 federal enforcement record
- SEYMOUR TOOL & DIE, INC.NORTH EAST — 1 federal enforcement record
- MET-PRO TECHNOLOGIES, LLCTELFORD — 1 federal enforcement record
- ANTARES INSTRUMENTS. INC.HORSHAM — 1 federal enforcement record
Related searches
- Special Die and Tool, Die Set, Jig, and Fixture ManufacturingAll employers in this industry
- Employers in PAState-wide enforcement data
- Special Die and in PAIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on J K TOOL AND DIE, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is J K TOOL AND DIE, INC.'s OSHA violation history?
- J K TOOL AND DIE, INC. has 2 OSHA inspections on record with 25 violations and $4,560 in total penalties.
- How does J K TOOL AND DIE, INC.'s safety record compare to its industry?
- J K TOOL AND DIE, INC. operates in the special die and tool, die set, jig, and fixture manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.8.