Establishment profile
INTERMOUNTAIN STAMPING & TOOL CO.
7986 SOUTH 1530 WEST, WEST JORDAN, UT, 84084
Summary
INTERMOUNTAIN STAMPING & TOOL CO. has accumulated 22 OSHA violations across 8 inspections over 40 years of recorded history, with $800 in total assessed penalties.
The establishment sits in the 98th percentile for violations within its industry-state peer group of 17,829 employers. Inspection frequency runs at the 100th percentile. The most recent enforcement activity was recorded 36 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
INTERMOUNTAIN STAMPING & TOOL CO. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
50% of inspections at this establishment produced violations, with 4 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 19 distinct standards shown · 22 citations in this view · $800 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| GEN0217030100001 | 3 | 3 | $400 | Sep 1988 | Jan 1990 |
| GEN021703030000105 | 2 | 2 | $125 | Dec 1989 | Jan 1990 |
| GEN02120103 000 | 1 | 1 | $150 | Nov 1985 | Nov 1985 |
| GEN0217040100002 | 1 | 1 | $125 | Dec 1989 | Dec 1989 |
| GEN02170602 | 1 | 1 | — | Jan 1990 | Jan 1990 |
| GEN0217020700008 | 1 | 1 | — | Dec 1989 | Dec 1989 |
| GEN0217020800003 | 1 | 1 | — | Dec 1989 | Dec 1989 |
| GEN0108070600001 | 1 | 1 | — | Dec 1989 | Dec 1989 |
| GEN02120105 | 1 | 1 | — | Dec 1989 | Dec 1989 |
| GEN02131604 | 1 | 1 | — | Dec 1989 | Dec 1989 |
| GEN0217020400001 | 1 | 1 | — | Dec 1989 | Dec 1989 |
| GEN0217020400002 | 1 | 1 | — | Dec 1989 | Dec 1989 |
| GEN0217050100002 | 1 | 1 | — | Dec 1989 | Dec 1989 |
| GEN0219050100001 | 1 | 1 | — | Dec 1989 | Dec 1989 |
| GEN025201020000205 | 1 | 1 | — | Dec 1989 | Dec 1989 |
| GEN03030702 000 | 1 | 1 | — | Nov 1985 | Nov 1985 |
| GEN02150209 | 1 | 1 | — | Nov 1985 | Nov 1985 |
| GEN02430303 | 1 | 1 | — | Nov 1985 | Nov 1985 |
| GEN02120101 | 1 | 1 | — | Nov 1985 | Nov 1985 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer. Peer group: 17,829 employers. This establishment has 22 OSHA violations; peer median is 2.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for INTERMOUNTAIN STAMPING & TOOL CO.. Verify directly with OSHA Injury Tracking Application →
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for INTERMOUNTAIN STAMPING & TOOL CO.. Verify directly with Occupational Safety and Health Administration →
OSHA accident events
Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.
| Date | Event | Injuries | Hospitalized | Fatalities | |
|---|---|---|---|---|---|
| Dec 16, 1989 | AMPUTATED,PIN,WORK RULES,THUMB,TWO-HAND CONTROL,POINT OF OPERATION,PUNCH PRESS,HAND,MECH MALFUNCTION,UNGUARDED | 1 | 1 | — | |
| Nov 3, 1989 | AMPUTATED,POWER PRESS,FINGER,WORK RULES,FOOT CONTROL,LOCKOUT,POINT OF OPERATION,UNGUARDED,INATTENTION | 1 | 1 | — | |
| Sep 15, 1988 | AMPUTATED,FINGER,WORK RULES,INTERLOCK,PUNCH PRESS,UNGUARDED | 1 | 1 | — |
Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.
Activity timeline
No federal enforcement activity has been recorded against this establishment in 36+ years. Most recent activity: 36 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for INTERMOUNTAIN STAMPING & TOOL CO.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for INTERMOUNTAIN STAMPING & TOOL CO.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for INTERMOUNTAIN STAMPING & TOOL CO.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for INTERMOUNTAIN STAMPING & TOOL CO.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for INTERMOUNTAIN STAMPING & TOOL CO.. Verify directly with Environmental Protection Agency →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 1990-04-05 | Follow-up | 0 | — | $0 | |
| 1989-12-18 | Accident | 3 | 2 | $250 | |
| 1989-12-06 | Accident | 13 | 1 | $250 | |
| 1988-11-08 | Follow-up | 0 | — | $0 | |
| 1988-09-16 | Accident | 1 | 1 | $150 | |
| 1986-01-07 | Follow-up | 0 | — | $0 | |
| 1985-11-07 | Planned | 5 | 1 | $150 | |
| 1985-11-07 | Planned | 0 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Related searches
- Employers in UTState-wide enforcement data
About this data
This profile aggregates federal enforcement records on INTERMOUNTAIN STAMPING & TOOL CO. from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is INTERMOUNTAIN STAMPING & TOOL CO.'s OSHA violation history?
- INTERMOUNTAIN STAMPING & TOOL CO. has 8 OSHA inspections on record with 22 violations and $800 in total penalties.