Establishment profile
INJECTION MOLDING CORPORATION
1600 RT. 315, WILKES-BARRE, PA, 18702
Summary
INJECTION MOLDING CORPORATION has accumulated 23 OSHA violations across 4 inspections over 42 years of recorded history, with $4,200 in total assessed penalties.
The establishment sits in the 97th percentile for violations within its industry-state peer group of 72,990 employers. Inspection frequency runs at the 96th percentile. The most recent enforcement activity was recorded 34 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
INJECTION MOLDING CORPORATION appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
75% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 23 citations in this view · $4,200 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.1200 E01 | 2 | 2 | — | Sep 1986 | Apr 1987 |
| 29 CFR 1910.1200 F04 I | 2 | 2 | — | Sep 1986 | Apr 1987 |
| 29 CFR 1910.1200 H | 2 | 2 | — | Sep 1986 | Apr 1987 |
| 29 CFR 1910.0132 A | 1 | 1 | $875 | Oct 1991 | Oct 1991 |
| 29 CFR 1910.0332 B01 | 1 | 1 | $875 | Oct 1991 | Oct 1991 |
| 29 CFR 1910.0147 C01 | 1 | 1 | $700 | Oct 1991 | Oct 1991 |
| 29 CFR 1910.0213 D01 | 1 | 1 | $700 | Oct 1991 | Oct 1991 |
| 29 CFR 1910.0219 D01 | 1 | 1 | $525 | Oct 1991 | Oct 1991 |
| 29 CFR 1910.0151 C | 1 | 1 | $525 | Oct 1991 | Oct 1991 |
| 29 CFR 1910.0212 A05 | 1 | 1 | — | Oct 1991 | Oct 1991 |
| 29 CFR 1910.0219 E03 I | 1 | 1 | — | Oct 1991 | Oct 1991 |
| 29 CFR 1910.0305 G02 III | 1 | 1 | — | Oct 1991 | Oct 1991 |
| 29 CFR 1910.0133 A01 | 1 | 1 | — | Oct 1991 | Oct 1991 |
| 29 CFR 1910.0333 B02 I | 1 | 1 | — | Oct 1991 | Oct 1991 |
| 29 CFR 1910.1200 F04 II | 1 | 1 | — | Apr 1987 | Apr 1987 |
| 29 CFR 1910.0020 G01 II | 1 | 1 | — | Sep 1986 | Sep 1986 |
| 29 CFR 1910.0020 G02 | 1 | 1 | — | Sep 1986 | Sep 1986 |
| 29 CFR 1910.0020 G01 I | 1 | 1 | — | Sep 1986 | Sep 1986 |
| 29 CFR 1910.0020 G01 III | 1 | 1 | — | Sep 1986 | Sep 1986 |
| 29 CFR 1910.1200 G01 | 1 | 1 | — | Sep 1986 | Sep 1986 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer. Peer group: 72,990 employers. This establishment has 23 OSHA violations; peer median is 2.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for INJECTION MOLDING CORPORATION. Verify directly with OSHA Injury Tracking Application →
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for INJECTION MOLDING CORPORATION. Verify directly with Occupational Safety and Health Administration →
OSHA accident events
Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.
| Date | Event | Injuries | Hospitalized | Fatalities | |
|---|---|---|---|---|---|
| Oct 8, 1991 | BURN,PPE,MOLDING MACHINE,TRAP GAS,WORK RULES,FACE,ACCIDENTAL DISCHARGE,HAND,HIGH TEMPERATURE | 1 | 1 | — |
Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.
Activity timeline
No federal enforcement activity has been recorded against this establishment in 34+ years. Most recent activity: 34 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for INJECTION MOLDING CORPORATION. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for INJECTION MOLDING CORPORATION. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for INJECTION MOLDING CORPORATION. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for INJECTION MOLDING CORPORATION. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for INJECTION MOLDING CORPORATION. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for INJECTION MOLDING CORPORATION. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 1991-10-08 | Referral | 11 | 9 | $4,200 | |
| 1987-02-05 | Follow-up | 4 | — | $0 | |
| 1986-08-07 | Complaint | 8 | — | $0 | |
| 1984-03-09 | Planned | 0 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Related searches
- Employers in PAState-wide enforcement data
About this data
This profile aggregates federal enforcement records on INJECTION MOLDING CORPORATION from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is INJECTION MOLDING CORPORATION's OSHA violation history?
- INJECTION MOLDING CORPORATION has 4 OSHA inspections on record with 23 violations and $4,200 in total penalties.