Establishment profile
INDUSTRIAL TOOL SERVICE, INC.
109 WILLIAMS STREET, BRISTOL, VA, 24201
333514 — Special Die and Tool, Die Set, Jig, and Fixture Manufacturing
Summary
INDUSTRIAL TOOL SERVICE, INC. has accumulated 14 OSHA violations across 3 inspections over 31 years of recorded history, with $2,900 in total assessed penalties.
The establishment sits in the 78th percentile for violations within its industry-state peer group of 42 employers. Inspection frequency runs at the 66th percentile. The most recent enforcement activity was recorded 19 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
INDUSTRIAL TOOL SERVICE, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
67% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 14 distinct standards shown · 14 citations in this view · $2,900 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0136 A | 1 | 1 | $875 | Mar 1995 | Mar 1995 |
| 29 CFR 1910.0242 B | 1 | 1 | $625 | Mar 1995 | Mar 1995 |
| 29 CFR 1910.0037 Q01 | 1 | 1 | $500 | Mar 1995 | Mar 1995 |
| 29 CFR 1910.0178 L06 | 1 | 1 | $225 | Jan 2007 | Jan 2007 |
| 29 CFR 1910.0253 B04 I | 1 | 1 | $225 | Jan 2007 | Jan 2007 |
| 29 CFR 1910.0147 C04 I | 1 | 1 | $225 | Jan 2007 | Jan 2007 |
| 29 CFR 1910.0157 G01 | 1 | 1 | $225 | Jan 2007 | Jan 2007 |
| 29 CFR 1904.0035 B01 II | 1 | 1 | — | Jan 2007 | Jan 2007 |
| 29 CFR 1910.0132 D02 | 1 | 1 | — | Jan 2007 | Jan 2007 |
| 29 CFR 1910.0134 E02 I | 1 | 1 | — | Jan 2007 | Jan 2007 |
| 29 CFR 1910.0178 Q07 | 1 | 1 | — | Jan 2007 | Jan 2007 |
| 29 CFR 1910.0215 B09 | 1 | 1 | — | Jan 2007 | Jan 2007 |
| 29 CFR 1910.1200 E01 | 1 | 1 | — | Mar 1995 | Mar 1995 |
| 29 CFR 1910.1200 H | 1 | 1 | — | Mar 1995 | Mar 1995 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Above average violations in NAICS 3335 within VA. Peer group: 42 employers. This establishment has 14 OSHA violations; peer median is 7.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for INDUSTRIAL TOOL SERVICE, INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for INDUSTRIAL TOOL SERVICE, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 19+ years. Most recent activity: 19 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for INDUSTRIAL TOOL SERVICE, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for INDUSTRIAL TOOL SERVICE, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for INDUSTRIAL TOOL SERVICE, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for INDUSTRIAL TOOL SERVICE, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for INDUSTRIAL TOOL SERVICE, INC.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for INDUSTRIAL TOOL SERVICE, INC.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2006-11-21 | Planned | 9 | 5 | $900 | |
| 1995-04-03 | Referral | 0 | — | $0 | |
| 1995-02-17 | Planned | 5 | 3 | $2,000 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in special die and tool, die set, jig, and fixture manufacturing within VA, ordered by federal enforcement volume:
- PARKWAY STEEL RULE CUTTING DIES, INC.BEDFORD — 1 federal enforcement record
- ELECTRONIC DEVELOPMENT LABSDANVILLE — 1 federal enforcement record
- OBJECTIVE INDUSTRIESFISHERSVILLE — 1 federal enforcement record
- MOUNTAIN PRECISION TOOL COMPANYBLACKSBURG — 1 federal enforcement record
- FINISH LINE DIE CUTTING LLCRICHMOND — 1 federal enforcement record
- MACO TOOLCHRISTIANSBURG — 1 federal enforcement record
- TRITON INDUSTRIES, INC.NEWPORT NEWS — 1 federal enforcement record
- SUTTON-CLARKRICHMOND — 1 federal enforcement record
- ROTOMETRICSMEADOWS OF DAN — 1 federal enforcement record
Related searches
- Special Die and Tool, Die Set, Jig, and Fixture ManufacturingAll employers in this industry
- Employers in VAState-wide enforcement data
- Special Die and in VAIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on INDUSTRIAL TOOL SERVICE, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is INDUSTRIAL TOOL SERVICE, INC.'s OSHA violation history?
- INDUSTRIAL TOOL SERVICE, INC. has 3 OSHA inspections on record with 14 violations and $2,900 in total penalties.
- How does INDUSTRIAL TOOL SERVICE, INC.'s safety record compare to its industry?
- INDUSTRIAL TOOL SERVICE, INC. operates in the special die and tool, die set, jig, and fixture manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.8.