Skip to main content
FastDOL

Establishment profile

ILLINOIS TOOL WORKS, INC.

935 N. OAKLAWN AVENUE, ELMHURST, IL, 60126
Operated by Illinois Tool Works · 1 of 155 establishments

Download as PDF →

OSHA inspections
1
over 9 years
Violations
2
$9,500 in penalties
Penalties
$9,500
$4,750 avg
Violations across 2 federal agencies
Enforcement actions from multiple agencies may indicate systemic compliance issues across functions.
Accident investigations on record
1 hospitalizations · 1 National Emphasis Program inspections

Summary

ILLINOIS TOOL WORKS, INC. has accumulated 2 OSHA violations across 1 inspection over 9 years of recorded history, with $9,500 in total assessed penalties.

The establishment sits in the 38th percentile for violations within its industry-state peer group of 193 employers. The most recent enforcement activity was recorded 9 years ago.

Federal records were found in 2 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

ILLINOIS TOOL WORKS, INC. appears in OSHA workplace safety and NLRB labor relations records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.

OSHA workplace safety

Inspections
1
0.1 / yr · last 9 yrs
Violations
2
0.2 / yr
Penalties
$9,500
$4,750 avg / violation
100% serious0% other
Inspection trigger · referral
1 of 1

100% of inspections at this establishment produced violations,

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 2 distinct standards shown · 2 citations in this view · $9,500 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0147 C04 I11$9,500Apr 2017Apr 2017
29 CFR 1910.0147 D11—Apr 2017Apr 2017

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

38th

Below average violations in NAICS 3363 within IL. Peer group: 193 employers. This establishment has 2 OSHA violations; peer median is 3.

Fewer violationsMore violations
Penalty percentile
76th
peer median: $3,880
Inspection frequency
0th
peer median: 2

Safety self-report (OSHA 300A)

Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.

DART rate
5.8
vs industry
+4.0
TRIR
6.4
vs industry
+3.9

Reported for 139 average annual employees at this establishment.

Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.

Industry benchmark

Industry avg TRIR
2.5
BLS SOII 2024
Industry avg DART
1.8
BLS SOII 2024
Self-reported TRIR
6.4
OSHA ITA Form 300A (employer self-reported)

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Referral
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for ILLINOIS TOOL WORKS, INC.. Verify directly with Occupational Safety and Health Administration →

OSHA accident events

Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.

DateEventInjuriesHospitalizedFatalities
Jan 22, 2017Amputated,Amputation,Caught In,Finger,Lockout/Tagout,Machine Guarding11—

Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.

Activity timeline

Data refreshed
Weekly
First OSHA inspection
—
Most recent activity
9 years ago

No federal enforcement activity has been recorded against this establishment in 9+ years. Most recent activity: 9 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for ILLINOIS TOOL WORKS, INC.. Verify directly with Wage and Hour Division →

Mine safety (MSHA)

No MSHA mine safety violations on file for ILLINOIS TOOL WORKS, INC.. Verify directly with Mine Safety and Health Administration →

Labor relations (NLRB)

Company-level in IL — for Illinois Tool Works, not this location alone

Total cases
1
Unfair labor practice
1

National Labor Relations Board — unfair labor practice charges and union representation cases. The NLRB records cases at the company/regional level (no worksite address), so these are matched by company name and state and may span other Illinois Tool Works locations in the same state.

NLRB cases

National Labor Relations Board cases involving this employer. Includes unfair labor practice (ULP) filings and representation election proceedings. NLRB enforcement is process-driven; no per-case monetary penalty is assessed (remedies are case-by-case backpay orders, posting requirements, election re-runs, etc.). 1 case · 1 ULP

Case numberTypeFiledClosedStatusRegion
13-CA-041261Unfair labor practiceAug 2003Oct 2003ClosedRegion 13, Chicago, Illinois

Source: NLRB case files. Rows shown are those the agency has published. Region numbers (1–31) correspond to NLRB's geographic offices.

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for ILLINOIS TOOL WORKS, INC.. Verify directly with Office of Foreign Labor Certification →

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for ILLINOIS TOOL WORKS, INC.. Verify directly with Environmental Protection Agency →

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for ILLINOIS TOOL WORKS, INC.. Verify directly with UVA Corporate Prosecution Registry →

Federal contracts

This location

Obligated (5-yr)
$0
Obligated (all-time)
$33K
Awards
44
Top agency
General Services Administration
$18K
Company-wide — ILLINOIS TOOL WORKS INC. (across 71 entities)
Obligated (5-yr)
$65.9M
Obligated (all-time)
$216.0M
Awards (all-time)
5,604

Consolidated across all USAspending recipient entities under this corporate parent — not attributable to this single location.

Top agencies by obligation (this location)
General Services Administration$18K
Department of Defense$15K
Largest awards
  • Department of Defense
    SEAL
    contract · Last action 2009-06-11
    $5,250
  • Department of Defense
    STRAPPING
    contract · Last action 2011-02-16
    $4,950
  • Department of Defense
    STRAP BANDING KIT
    contract · Last action 2010-09-17
    $4,390
  • General Services Administration
    TENSIONER, STEEL STRAPPING: TYPE: PUSHER/WINDLESS WITH CUTTER. SZ: FOR USE WITH 3/8" TO 3/4" WIDE STRAPPING WITH THICKNESS UP TO 0.030" . FEATURE: SHORT HANDLES. ACME DISTRIBUTORS PN M1920. (PARTIAL DESCRIPTION) < < < < < < < < PLEASE EXPEDITE > > > > > > > >
    contract · Last action 2009-09-04
    $1,950
  • General Services Administration
    TENSIONER, STEEL STRAPPING: TYPE: PUSHER/WINDLES S WITH CUTTER. SZ: FOR USE WITH 3/8" TO 3/4
    contract · Last action 2008-08-27
    $1,755
  • General Services Administration
    TENSIONER, STEEL STRAPPING: TYPE: PUSHER/WINDLES S WITH CUTTER. SZ: FOR USE WITH 3/8" TO 3/4
    contract · Last action 2008-09-08
    $1,170
  • General Services Administration
    TAS::17 1804::TAS TENSIONER, STEEL STRAPPING: TYPE: PUSHER/WINDLESS WITH CUTTER. SZ: FOR USE WITH 3/8" TO 3/4" WIDE STRAPPING WITH THICKNESS UP TO 0.030" . FEATURE: SHORT HANDLES. ACME DISTRIBUTORS PN M1920. (PARTIAL DESCRIPTION)
    contract · Last action 2010-04-22
    $975
  • General Services Administration
    TENSIONER, STEEL STRAPPING: TYPE: PUSHER/WINDLES S WITH CUTTER. SZ: FOR USE WITH 3/8" TO 3/4" WID E STRAPPING WITH THICKNESS UP TO 0.030" . FEATURE : SHORT HANDLES. ACME DISTRIBUTORS PN M1920. (PA RTIAL DESCRIPTION)
    contract · Last action 2011-01-07
    $780
  • General Services Administration
    TENSIONER, STEEL STRAPPING: TYPE: PUSHER/WINDLES S WITH CUTTER. SZ: FOR USE WITH 3/8" TO 3/4
    contract · Last action 2008-09-19
    $780
  • General Services Administration
    TENSIONER, STEEL STRAPPING: TYPE: PUSHER/WINDLES S WITH CUTTER. SZ: FOR USE WITH 3/8" TO 3/4
    contract · Last action 2008-01-29
    $675
  • General Services Administration
    TENSIONER, STEEL STRAPPING: TYPE: PUSHER/WINDLES S WITH CUTTER SZ: FOR USE WITH 3/8 INCH TO 3/4 I NCH WIDE STRAPPING WITH THICKNESS UP TO 0.030 IN CH FEATURE: SHORT HANDLES ACME DISTRIBUTORS PN M 1920. (PARTIAL DESCRIPTION) SHIP TO: SFWP AND HABITABILITY WAREHOUSE COMM 619 545 1524 DSN 735 1524 BLDG 271 DR 2 COMNAVBASE CORONADO SAN DIEGO CA 92135-7130
    contract · Last action 2011-08-19
    $620
  • General Services Administration
    TENSIONER, STEEL STRAPPING: TYPE: PUSHER/WINDLES S WITH CUTTER. SZ: FOR USE WITH 3/8" TO 3/4
    contract · Last action 2008-09-16
    $585
  • General Services Administration
    TAS::17 1804::TAS TENSIONER, STEEL STRAPPING: TYPE: PUSHER/WINDLES S WITH CUTTER. SZ: FOR USE WITH 3/8" TO 3/4" WID E STRAPPING WITH THICKNESS UP TO 0.030" . FEATURE : SHORT HANDLES. ACME DISTRIBUTORS PN M1920. (PA RTIAL DESCRIPTION)
    contract · Last action 2010-10-29
    $390
  • General Services Administration
    TAS::17 1804::TAS TENSIONER, STEEL STRAPPING: TYPE: PUSHER/WINDLES S WITH CUTTER. SZ: FOR USE WITH 3/8" TO 3/4" WID E STRAPPING WITH THICKNESS UP TO 0.030" . FEATURE : SHORT HANDLES. ACME DISTRIBUTORS PN M1920. (PA RTIAL DESCRIPTION)
    contract · Last action 2010-10-08
    $390
  • General Services Administration
    TAS::17 1804::TAS TENSIONER, STEEL STRAPPING: TYPE: PUSHER/WINDLES S WITH CUTTER. SZ: FOR USE WITH 3/8" TO 3/4" WID E STRAPPING WITH THICKNESS UP TO 0.030" . FEATURE : SHORT HANDLES. ACME DISTRIBUTORS PN M1920. (PA RTIAL DESCRIPTION)
    contract · Last action 2010-10-08
    $390
  • General Services Administration
    TAS::17 1804::TAS TENSIONER, STEEL STRAPPING: TYPE: PUSHER/WINDLES S WITH CUTTER. SZ: FOR USE WITH 3/8" TO 3/4" WID E STRAPPING WITH THICKNESS UP TO 0.030" . FEATURE : SHORT HANDLES. ACME DISTRIBUTORS PN M1920. (PA RTIAL DESCRIPTION)
    contract · Last action 2010-10-08
    $390
  • General Services Administration
    TAS::17 1804::TAS TENSIONER, STEEL STRAPPING: TYPE: PUSHER/WINDLES S WITH CUTTER. SZ: FOR USE WITH 3/8" TO 3/4" WID E STRAPPING WITH THICKNESS UP TO 0.030" . FEATURE : SHORT HANDLES. ACME DISTRIBUTORS PN M1920. (PA RTIAL DESCRIPTION)
    contract · Last action 2010-10-08
    $390
  • General Services Administration
    TAS::17 1804::TAS TENSIONER, STEEL STRAPPING: TYPE: PUSHER/WINDLES S WITH CUTTER. SZ: FOR USE WITH 3/8" TO 3/4" WID E STRAPPING WITH THICKNESS UP TO 0.030" . FEATURE : SHORT HANDLES. ACME DISTRIBUTORS PN M1920. (PA RTIAL DESCRIPTION)
    contract · Last action 2010-10-06
    $390
  • General Services Administration
    TAS::17 1804::TAS TENSIONER, STEEL STRAPPING: TYPE: PUSHER/WINDLES S WITH CUTTER. SZ: FOR USE WITH 3/8" TO 3/4" WID E STRAPPING WITH THICKNESS UP TO 0.030" . FEATURE : SHORT HANDLES. ACME DISTRIBUTORS PN M1920. (PA RTIAL DESCRIPTION)
    contract · Last action 2010-10-06
    $390
  • General Services Administration
    TAS::17 1804::TAS TENSIONER, STEEL STRAPPING: TYPE: PUSHER/WINDLES S WITH CUTTER. SZ: FOR USE WITH 3/8" TO 3/4" WID E STRAPPING WITH THICKNESS UP TO 0.030" . FEATURE : SHORT HANDLES. ACME DISTRIBUTORS PN M1920. (PA RTIAL DESCRIPTION)
    contract · Last action 2010-09-15
    $390
  • General Services Administration
    TENSIONER, STEEL STRAPPING: TYPE: PUSHER/WINDLESS WITH CUTTER. SZ: FOR USE WITH 3/8" TO 3/4" WIDE STRAPPING WITH THICKNESS UP TO 0.030" . FEATURE: SHORT HANDLES. ACME DISTRIBUTORS PN M1920. (PARTIAL DESCRIPTION) < < < < < < < < PLEASE EXPEDITE > > > > > > > >
    contract · Last action 2010-02-03
    $390
  • General Services Administration
    TENSIONER, STEEL STRAPPING: TYPE: PUSHER/WINDLESS WITH CUTTER. SZ: FOR USE WITH 3/8" TO 3/4" WIDE STRAPPING WITH THICKNESS UP TO 0.030" . FEATURE: SHORT HANDLES. ACME DISTRIBUTORS PN M1920. (PARTIAL DESCRIPTION) < < < < < < < < PLEASE EXPEDITE > > > > > > > >
    contract · Last action 2009-07-08
    $390
  • General Services Administration
    TENSIONER, STEEL STRAPPING: TYPE: PUSHER/WINDLES S WITH CUTTER. SZ: FOR USE WITH 3/8" TO 3/4" WID E STRAPPING WITH THICKNESS UP TO 0.030" . FEATURE : SHORT HANDLES. ACME DISTRIBUTORS PN M1920. (PA RTIAL DESCRIPTION)
    contract · Last action 2009-06-08
    $390
  • General Services Administration
    TENSIONER, STEEL STRAPPING: TYPE: PUSHER/WINDLES S WITH CUTTER. SZ: FOR USE WITH 3/8" TO 3/4
    contract · Last action 2009-03-10
    $390
  • General Services Administration
    TENSIONER, STEEL STRAPPING: TYPE: PUSHER/WINDLES S WITH CUTTER. SZ: FOR USE WITH 3/8" TO 3/4
    contract · Last action 2009-02-03
    $390
  • General Services Administration
    TENSIONER, STEEL STRAPPING: TYPE: PUSHER/WINDLES S WITH CUTTER. SZ: FOR USE WITH 3/8" TO 3/4
    contract · Last action 2008-11-10
    $390
  • General Services Administration
    TENSIONER, STEEL STRAPPING: TYPE: PUSHER/WINDLES S WITH CUTTER. SZ: FOR USE WITH 3/8" TO 3/4
    contract · Last action 2008-06-11
    $390
  • General Services Administration
    TAS::97 4930::TAS STRAP,DISPENSER AWARD MADE IAW RFQ#3540-01-211-9572 DATED10/12/2010 INCORPORATED AND MADE PART OF THIS AWARD-L2
    contract · Last action 2010-10-18
    $248
  • General Services Administration
    TAS::97 4930::TAS STRAP,DISPENSER
    contract · Last action 2010-04-08
    $248
  • General Services Administration
    TAS::97 4930::TAS STRAP,DISPENSER ATTN:ROBERTA
    contract · Last action 2010-04-08
    $248
  • General Services Administration
    TAS::97 4930::TAS STRAP,DISPENSER
    contract · Last action 2010-04-08
    $248
  • General Services Administration
    TAS::97 4930::TAS STRAP,DISPENSER
    contract · Last action 2010-04-08
    $248
  • General Services Administration
    TENSIONER, STEEL STRAPPING: TYPE: PUSHER/WINDLES S WITH CUTTER SZ: FOR USE WITH 3/8 INCH TO 3/4 I NCH WIDE STRAPPING WITH THICKNESS UP TO 0.030 IN CH FEATURE: SHORT HANDLES ACME DISTRIBUTORS PN M 1920. (PARTIAL DESCRIPTION)
    contract · Last action 2011-08-19
    $207
  • General Services Administration
    TENSIONER, STEEL STRAPPING: TYPE: PUSHER/WINDLES S WITH CUTTER SZ: FOR USE WITH 3/8 INCH TO 3/4 I NCH WIDE STRAPPING WITH THICKNESS UP TO 0.030 IN CH FEATURE: SHORT HANDLES ACME DISTRIBUTORS PN M 1920. (PARTIAL DESCRIPTION)
    contract · Last action 2011-08-19
    $207
  • General Services Administration
    TENSIONER, STEEL STRAPPING: TYPE: PUSHER/WINDLES S WITH CUTTER. SZ: FOR USE WITH 3/8" TO 3/4" WID E STRAPPING WITH THICKNESS UP TO 0.030" . FEATURE : SHORT HANDLES. ACME DISTRIBUTORS PN M1920. (PA RTIAL DESCRIPTION)
    contract · Last action 2011-06-17
    $207
  • General Services Administration
    TAS::17 1804::TAS TENSIONER, STEEL STRAPPING: TYPE: PUSHER/WINDLES S WITH CUTTER. SZ: FOR USE WITH 3/8" TO 3/4" WID E STRAPPING WITH THICKNESS UP TO 0.030" . FEATURE : SHORT HANDLES. ACME DISTRIBUTORS PN M1920. (PA RTIAL DESCRIPTION) SHIP TO: SFWP AND HABITABILITY WAREHOUSE COMM 619 545 1524 DSN 735 1524 BLDG 271 DR 2 COMNAVBASE CORONADO SAN DIEGO CA 92135-7130
    contract · Last action 2010-10-29
    $195
  • General Services Administration
    TENSIONER, STEEL STRAPPING: TYPE: PUSHER/WINDLESS WITH CUTTER. SZ: FOR USE WITH 3/8" TO 3/4" WIDE STRAPPING WITH THICKNESS UP TO 0.030" . FEATURE: SHORT HANDLES. ACME DISTRIBUTORS PN M1920. (PARTIAL DESCRIPTION) < < < < < < < < PLEASE EXPEDITE > > > > > > > >
    contract · Last action 2010-01-05
    $195
  • General Services Administration
    TENSIONER, STEEL STRAPPING: TYPE: PUSHER/WINDLES S WITH CUTTER. SZ: FOR USE WITH 3/8" TO 3/4
    contract · Last action 2009-02-20
    $195
  • General Services Administration
    TENSIONER, STEEL STRAPPING: TYPE: PUSHER/WINDLES S WITH CUTTER. SZ: FOR USE WITH 3/8" TO 3/4
    contract · Last action 2008-08-27
    $195
  • General Services Administration
    TENSIONER, STEEL STRAPPING: TYPE: PUSHER/WINDLES S WITH CUTTER. SZ: FOR USE WITH 3/8" TO 3/4
    contract · Last action 2008-07-18
    $195
  • General Services Administration
    TENSIONER, STEEL STRAPPING: TYPE: PUSHER/WINDLES S WITH CUTTER. SZ: FOR USE WITH 3/8" TO 3/4
    contract · Last action 2008-06-11
    $195
  • Department of Defense
    STRAP, FLAT BANDING
    contract · Last action 2011-04-29
    $195
  • Department of Defense
    111 TENSIONER
    contract · Last action 2010-07-16
    $0
  • General Services Administration
    TENSIONER, STEEL STRAPPING: TYPE: PUSHER/WINDLES S WITH CUTTER. SZ: FOR USE WITH 3/8" TO 3/4
    contract · Last action 2008-06-09
    $0

Federal contract dollars to this establishment. Primary NAICS: 333993 - PACKAGING MACHINERY MANUFACTURING. Last action: 2011-08-19. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.

Inspection history

DateTriggerViolationsSeriousPenalty
2017-02-02Referral22$9,500

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Part of a larger organization

ILLINOIS TOOL WORKS, INC. is one of 155 establishments rolled up under the parent organization Illinois Tool Works.

Federal enforcement records on this page represent activity at this specific establishment only. The full enforcement footprint of Illinois Tool Works across all 155 of its tracked locations is viewable on the parent profile.

Other employers in this industry and state

Other employers in this industry within IL, ordered by federal enforcement volume:

Other locations under this parent

Other establishments operated by Illinois Tool Works, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on ILLINOIS TOOL WORKS, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code. This establishment resolves to the parent rollup Illinois Tool Works, which operates 155 establishments in our dataset.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is ILLINOIS TOOL WORKS, INC.'s OSHA violation history?
ILLINOIS TOOL WORKS, INC. has 1 OSHA inspection on record with 2 violations and $9,500 in total penalties.