Establishment profile
HUBBARD TOOL & DIE CORP.
ROME INDUSTRIAL CENTER BUILDING 5, ROME, NY, 13440
332710 — Machine Shops
EIN 150585821
Summary
HUBBARD TOOL & DIE CORP. has accumulated 42 OSHA violations across 15 inspections over 52 years of recorded history, with $10,400 in total assessed penalties.
The establishment sits in the 99th percentile for violations within its industry-state peer group of 373 employers. Inspection frequency runs at the 100th percentile. The most recent enforcement activity was recorded 6 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
HUBBARD TOOL & DIE CORP. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
47% of inspections at this establishment produced violations, with 4 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 26 citations in this view · $10,400 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A01 | 3 | 3 | $3,193 | Apr 1997 | Jul 2015 |
| 29 CFR 1910.0219 D01 | 3 | 3 | $913 | May 1974 | Jun 2010 |
| 29 CFR 1910.0242 B | 2 | 2 | $2,322 | May 1974 | Apr 2020 |
| 29 CFR 1910.0219 E03 I | 2 | 2 | — | Apr 1997 | Jun 2010 |
| 29 CFR 1910.0107 B03 | 1 | 1 | $613 | Jun 2010 | Jun 2010 |
| 29 CFR 1910.0147 C06 I | 1 | 1 | $613 | Jun 2010 | Jun 2010 |
| 29 CFR 1910.0094 A04 III | 1 | 1 | $613 | Jun 2010 | Jun 2010 |
| 29 CFR 1910.0212 A03 II | 1 | 1 | $613 | Jun 2010 | Jun 2010 |
| 29 CFR 1910.0304 G05 | 1 | 1 | $368 | Jun 2010 | Jun 2010 |
| 29 CFR 1910.0107 B01 | 1 | 1 | $225 | Apr 1997 | Apr 1997 |
| 29 CFR 1910.0107 C05 | 1 | 1 | $225 | Apr 1997 | Apr 1997 |
| 29 CFR 1910.0023 C01 | 1 | 1 | $225 | Apr 1997 | Apr 1997 |
| 29 CFR 1910.0147 C01 | 1 | 1 | $225 | Apr 1997 | Apr 1997 |
| 29 CFR 1910.0025 B02 IB | 1 | 1 | $180 | Apr 1997 | Apr 1997 |
| 29 CFR 1910.0215 A02 | 1 | 1 | $45 | May 1974 | May 1974 |
| 29 CFR 1910.0178 P01 | 1 | 1 | $30 | May 1974 | May 1974 |
| 29 CFR 1910.0304 G06 VI | 1 | 1 | — | Jun 2010 | Jun 2010 |
| 29 CFR 1910.0107 B05 IV | 1 | 1 | — | Jun 2010 | Jun 2010 |
| 29 CFR 1910.0107 B09 | 1 | 1 | — | Jun 2010 | Jun 2010 |
| 29 CFR 1910.0107 C02 | 1 | 1 | — | Jun 2010 | Jun 2010 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer in NAICS 3327 within NY. Peer group: 373 employers. This establishment has 42 OSHA violations; peer median is 4.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 27 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
Self-reported events under 29 CFR 1904.39 (24-hour notification of hospitalization, amputation, or loss of an eye) · Jun 2015
Most frequent event: Caught in running equipment or machinery during regular operation
Source: OSHA Severe Injury Reports (federal OSHA only; state-plan states like California, Oregon, and Washington maintain their own programs and do not consistently report into this feed).
Severe injury reports — events
Each row is a hospitalization, amputation, or eye-loss event the employer self-reported to OSHA under 29 CFR 1904.39. Narratives are written by the reporting employer.
| Date | Event | Body part | Outcome | |
|---|---|---|---|---|
| Jun 3, 2015 | Caught in running equipment or machinery during regular operation | Finger(s), fingernail(s), n.e.c. | Amputation |
Source: OSHA Severe Injury Reports. Federal-OSHA jurisdiction only by default; some state-plan programs report voluntarily.
Activity timeline
No federal enforcement activity has been recorded against this establishment in 6+ years. Most recent activity: 6 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for HUBBARD TOOL & DIE CORP.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for HUBBARD TOOL & DIE CORP.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for HUBBARD TOOL & DIE CORP.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for HUBBARD TOOL & DIE CORP.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for HUBBARD TOOL & DIE CORP.. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility · 1 marked inactive.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
HUBBARD TOOL & DIE CORP ROME INDUSTRIAL CENTER- BLDG 5 · ROME, NY, 13440 | RCRA | No Violation Identified | 0 | 0 | — | Apr 2012 | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2020-02-27 | Planned | 1 | 1 | $2,277 | |
| 2015-06-10 | Referral | 1 | — | $2,400 | |
| 2011-02-04 | Follow-up | 0 | — | $0 | |
| 2011-02-04 | Complaint | 0 | — | $0 | |
| 2010-04-29 | Planned | 12 | 12 | $4,043 | |
| 2006-11-17 | Planned | 0 | — | $0 | |
| 2003-11-19 | Programmed Related | 0 | — | $0 | |
| 1997-04-15 | Programmed Other | 15 | 12 | $1,500 | |
| 1996-04-10 | Planned | 0 | — | $0 | |
| 1983-07-21 | Planned | 0 | — | $0 | |
| 1980-03-25 | Planned | 2 | — | $0 | |
| 1976-11-09 | Planned | 2 | — | $0 | |
| 1974-07-01 | Follow-up | 0 | — | $0 | |
| 1974-05-10 | Planned | 9 | — | $180 | |
| 1973-12-28 | Planned | 0 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within NY, ordered by federal enforcement volume:
- FRONHOFER TOOL COMPANY, INC.ARGYLE — 2 federal enforcement records
- HORSCHEL BROTHERS PRECISION, LLCSPRINGVILLE — 2 federal enforcement records
- EVERFAB INCEAST AURORA — 2 federal enforcement records
- BABBITT BEARINGS INCSYRACUSE — 2 federal enforcement records
- TRIPLETT MACHINE CO. INC.PHELPS — 2 federal enforcement records
- GEORGE INDUSTRIES LLCENDICOTT — 2 federal enforcement records
- KELLNER BROS. INC.BUFFALO — 2 federal enforcement records
- KOHLER MACHINE PRODUCTS INCLOCKPORT — 2 federal enforcement records
- FERMER PRECISION INC.ILION — 2 federal enforcement records
- TURBO MACHINED PRODUCTS LLCFRANKFORT — 1 federal enforcement record
Related searches
- Machine ShopsAll employers in this industry
- Employers in NYState-wide enforcement data
- Machine Shops in NYIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on HUBBARD TOOL & DIE CORP. from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is HUBBARD TOOL & DIE CORP.'s OSHA violation history?
- HUBBARD TOOL & DIE CORP. has 15 OSHA inspections on record with 42 violations and $10,399.5 in total penalties.
- How does HUBBARD TOOL & DIE CORP.'s safety record compare to its industry?
- HUBBARD TOOL & DIE CORP. operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7. HUBBARD TOOL & DIE CORP.'s self-reported DART rate is 3.79 compared to an industry average of 1.5.