Establishment profile
HONEMATIC MACHINE CORPORATION
222 SHREWSBURY ST, BOYLSTON, MA, 01505
332710 — Machine Shops
EIN 043165703
Summary
HONEMATIC MACHINE CORPORATION has accumulated 25 OSHA violations across 5 inspections over 50 years of recorded history, with $10,008 in total assessed penalties.
The establishment sits in the 97th percentile for violations within its industry-state peer group of 206 employers. Inspection frequency runs at the 95th percentile. The most recent enforcement activity was recorded 3 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
HONEMATIC MACHINE CORPORATION appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification, FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
80% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Peer comparison
Worse on violations than nearly every other employer in NAICS 3327 within MA. Peer group: 206 employers. This establishment has 25 OSHA violations; peer median is 2.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 22 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
Self-reported events under 29 CFR 1904.39 (24-hour notification of hospitalization, amputation, or loss of an eye) · Jun 2020
Most frequent event: Explosion of pressure vessel, piping, or tire
Source: OSHA Severe Injury Reports (federal OSHA only; state-plan states like California, Oregon, and Washington maintain their own programs and do not consistently report into this feed).
Severe injury reports — events
Each row is a hospitalization, amputation, or eye-loss event the employer self-reported to OSHA under 29 CFR 1904.39. Narratives are written by the reporting employer.
| Date | Event | Body part | Outcome | |
|---|---|---|---|---|
| Jun 9, 2020 | Explosion of pressure vessel, piping, or tire | Face, unspecified | Hospitalized |
Source: OSHA Severe Injury Reports. Federal-OSHA jurisdiction only by default; some state-plan programs report voluntarily.
OSHA accident events
Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.
| Date | Event | Injuries | Hospitalized | Fatalities | |
|---|---|---|---|---|---|
| Jun 9, 2020 | Air Pressure,Blunt force,Blunt force trauma,Bolt,Face,Flange,Flying Object,Fracture,Head,High Pressure,High Pressure Pipe,Laceration,Lack of Work Procedures,Metal Pipe,Mouth,Pipe,Pressure,Safety Device,Skull,Struck By,Testing,Unguarded | 1 | 1 | — |
Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.
Activity timeline
No federal enforcement activity has been recorded against this establishment in 3+ years. Most recent activity: 3 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for HONEMATIC MACHINE CORPORATION. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for HONEMATIC MACHINE CORPORATION. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for HONEMATIC MACHINE CORPORATION. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC)
No H-1B, H-2A, or H-2B labor condition applications on file for HONEMATIC MACHINE CORPORATION. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for HONEMATIC MACHINE CORPORATION. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for HONEMATIC MACHINE CORPORATION. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of DefenseCYLINDER BODY,AIRCRcontract · Last action 2025-10-30$691,400
- Department of DefenseCYLINDER SPECIALcontract · Last action 2025-06-12$583,360
- Department of DefenseCYLINDER BODY,AIRCRcontract · Last action 2025-07-17$549,000
- Department of DefenseCYLINDER ASSEMBLYcontract · Last action 2022-02-28$422,800
- Department of DefenseCYLINDER SPECIALcontract · Last action 2022-08-12$389,970
- Department of DefensePISTON ROD,DAMPER Acontract · Last action 2014-06-30$322,300
- Department of DefenseCYLINDER SPECIALcontract · Last action 2024-08-29$300,000
- Department of DefenseCYLINDER ASSEMBLYcontract · Last action 2017-12-14$240,150
- Department of Defense8504248568!PISTON ROD,DAMPER Acontract · Last action 2019-12-18$229,409
- Department of DefenseNAVY AVIATIONcontract · Last action 2014-07-10$179,980
- Department of DefenseGUN BARRELS, 40MM DIAMETER, 15 FEET LONGcontract · Last action 2010-06-09$136,980
- Department of DefenseIGF::OT::IGF 40MM X 15' 1.496" BORE GUN BARRELcontract · Last action 2016-08-02$120,094
- Department of DefenseGUN BARRELScontract · Last action 2012-08-16$112,944
- Department of Defense8501404016!TUBE,PRESSURE REFUEcontract · Last action 2014-09-25$107,016
- Department of DefenseNEW BARRELcontract · Last action 2011-08-15$104,914
- Department of Defense8511286411!PISTON ROD,DAMPERcontract · Last action 2025-05-27$99,000
- Department of Defense8511392503!CYLINDER,ACTUATING,contract · Last action 2025-05-20$97,500
- Department of Defense40 MM CHAMBERcontract · Last action 2008-01-23$96,850
- Department of DefenseIGF::OT::IGF REBORE GUN BARRELScontract · Last action 2016-12-07$86,622
- Department of Defense8506131760!CYLINDER,ACTUATING,contract · Last action 2018-12-14$64,307
- Department of DefenseCYLINDER SPECIALcontract · Last action 2017-10-04$56,128
- Department of DefenseREBORE AND NEW BARRELScontract · Last action 2011-12-07$53,682
- Department of Defense8508170503!CYLINDER,ACTUATING,contract · Last action 2021-06-08$50,820
- Department of Defense8506994712!CYLINDER,ACTUATING,contract · Last action 2019-11-21$43,900
- Department of DefenseREBORE BARRELScontract · Last action 2009-11-13$38,026
- Department of Defense4505751323!CYLINDER,contract · Last action 2007-10-02$36,861
- Department of DefenseREBORE GUN BARRELScontract · Last action 2008-09-18$29,747
- Department of Defense8502625130!PISTONcontract · Last action 2015-10-29$28,012
- Department of Defense1" SMOOTH BORE GUN BARRELcontract · Last action 2014-06-25$23,959
- Department of Defense8501399408!PISTON ROD,DAMPERcontract · Last action 2015-11-24$11,281
- Department of DefenseINSTRUMENTATIONcontract · Last action 2010-09-24$7,184
- Department of Defense8510236342!CYLINDER,ACTUATING,contract · Last action 2024-04-18$0
- Department of DefenseMACHINING, FABRICATION AND DESIGN CRITICAL FUNCTIONScontract · Last action 2015-10-06$0
- Department of DefenseNAVAL AVIATIONcontract · Last action 2011-04-28$0
- Department of DefenseWIDE REANGE OF METALLIC AND NON METALLIC (FERROUS & NON-FERROUS) STRUCTURAL & NON STRUCTURAL AND BALLISTIC MATERIALS IN ALL COMMERCIALLY AVAILABLE SHAPEScontract · Last action 2010-04-22$0
- Department of Defensecontract · Last action 2007-11-06$-873
Federal contract dollars to this establishment. Primary NAICS: 336413 - OTHER AIRCRAFT PARTS AND AUXILIARY EQUIPMENT MANUFACTURING. Last action: 2025-10-30. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2023-01-26 | Planned | 4 | 4 | $4,465 | |
| 2020-06-12 | Referral | 1 | 1 | $5,398 | |
| 1985-05-14 | Planned | 3 | — | $0 | |
| 1979-04-03 | Complaint | 0 | — | $0 | |
| 1976-04-14 | Planned | 17 | — | $145 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within MA, ordered by federal enforcement volume:
- LUTCO, INC.WORCESTER — 3 federal enforcement records
- PAYNE ENGINEERING AND FABRICATION COMPANY INCORPORATEDCANTON — 2 federal enforcement records
- LASER SERVICES, INC.WESTFORD — 2 federal enforcement records
- SPINCRAFTN BILLERICA — 2 federal enforcement records
- MICRO MECH, INC.IPSWICH — 2 federal enforcement records
- INDUSTRIAL PRECISION, INC.WESTFIELD — 2 federal enforcement records
- DYNAMIC FLOWFORM CORPBILLERICA — 2 federal enforcement records
- ROBERT J. MORAN, INC.LITTLETON — 1 federal enforcement record
- LITTLE ENTERPRISES, INC.IPSWICH — 1 federal enforcement record
- F.H. PETERSON MACHINE CORPORATIONSTOUGHTON — 1 federal enforcement record
Related searches
- Machine ShopsAll employers in this industry
- Employers in MAState-wide enforcement data
- Machine Shops in MAIndustry × state cross-filter
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →About this data
This profile aggregates federal enforcement records on HONEMATIC MACHINE CORPORATION from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Frequently asked
- What is HONEMATIC MACHINE CORPORATION's OSHA violation history?
- HONEMATIC MACHINE CORPORATION has 5 OSHA inspections on record with 25 violations and $10,008 in total penalties.
- How does HONEMATIC MACHINE CORPORATION's safety record compare to its industry?
- HONEMATIC MACHINE CORPORATION operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7. HONEMATIC MACHINE CORPORATION's self-reported DART rate is 6.73 compared to an industry average of 1.5.