Establishment profile
HOLMES TOOL & ENGINEERING, INC.
1019 NORTH WAUKESHA STREET, BONIFAY, FL, 32425
332710 — Machine Shops
Summary
HOLMES TOOL & ENGINEERING, INC. has accumulated 7 OSHA violations across 4 inspections over 42 years of recorded history, with $10,605 in total assessed penalties.
The establishment sits in the 85th percentile for violations within its industry-state peer group of 244 employers. Inspection frequency runs at the 93rd percentile. The most recent enforcement activity was recorded 11 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
HOLMES TOOL & ENGINEERING, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
50% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 7 distinct standards shown · 7 citations in this view · $10,605 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0147 C07 I A | 1 | 1 | $2,464 | Dec 2014 | Dec 2014 |
| 29 CFR 1910.0147 C06 I | 1 | 1 | $2,464 | Dec 2014 | Dec 2014 |
| 29 CFR 1910.0147 C04 I | 1 | 1 | $2,464 | Dec 2014 | Dec 2014 |
| 29 CFR 1910.0305 G02 III | 1 | 1 | $1,785 | Jul 2011 | Jul 2011 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $1,428 | Jul 2011 | Jul 2011 |
| 29 CFR 1910.0147 C07 I B | 1 | 1 | — | Dec 2014 | Dec 2014 |
| 29 CFR 1910.0147 C05 II B | 1 | 1 | — | Dec 2014 | Dec 2014 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3327 within FL. Peer group: 244 employers. This establishment has 7 OSHA violations; peer median is 0.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 23 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for HOLMES TOOL & ENGINEERING, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 11+ years. Most recent activity: 11 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for HOLMES TOOL & ENGINEERING, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for HOLMES TOOL & ENGINEERING, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for HOLMES TOOL & ENGINEERING, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for HOLMES TOOL & ENGINEERING, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for HOLMES TOOL & ENGINEERING, INC.. Verify directly with Environmental Protection Agency →
Federal contracts
This location
Federal contract dollars to this establishment. Primary NAICS: 336413 - OTHER AIRCRAFT PARTS AND AUXILIARY EQUIPMENT MANUFACTURING. Last action: 2026-02-04. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2014-10-14 | Planned | 5 | 5 | $7,392 | |
| 2011-12-12 | Planned | 0 | — | $0 | |
| 2011-07-14 | Planned | 2 | 2 | $3,213 | |
| 1983-11-16 | Planned | 0 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within FL, ordered by federal enforcement volume:
- RING POWER CORPORATIONSAINT AUGUSTINE — 3 federal enforcement records
- PALM BEACH IRON WORKS, INC.WEST PALM BEACH — 2 federal enforcement records
- MEDLEY MACHINE SHOP INC.MEDLEY — 2 federal enforcement records
- TAMPA BRASS AND ALUMINUM CORPORATIONTAMPA — 2 federal enforcement records
- JC MACHINE INC.LAKELAND — 2 federal enforcement records
- GRINDER WEAR PARTS, INC.LARGO — 1 federal enforcement record
- ICI CUSTOM PARTS, INCTAMPA — 1 federal enforcement record
- ASSOCIATED MACHINE COMPANY, INCMIAMI — 1 federal enforcement record
- ANDRITZ, INCOLDSMAR — 1 federal enforcement record
- TRC JAX, LLCJACKSONVILLE — 1 federal enforcement record
Related searches
- Machine ShopsAll employers in this industry
- Employers in FLState-wide enforcement data
- Machine Shops in FLIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on HOLMES TOOL & ENGINEERING, INC. from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is HOLMES TOOL & ENGINEERING, INC.'s OSHA violation history?
- HOLMES TOOL & ENGINEERING, INC. has 4 OSHA inspections on record with 7 violations and $10,605 in total penalties.
- How does HOLMES TOOL & ENGINEERING, INC.'s safety record compare to its industry?
- HOLMES TOOL & ENGINEERING, INC. operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7. HOLMES TOOL & ENGINEERING, INC.'s self-reported DART rate is 4.18 compared to an industry average of 1.5.