Establishment profile
HEDWIN CORPORATION
1600 ROLAND HEIGHTS AVENUE, BALTIMORE, MD, 21211
326121 — Unlaminated Plastics Profile Shape Manufacturing
OSHA inspections
7
over 43 years
Violations
23
$4,220 in penalties
Penalties
$4,220
$183 avg
Accident investigations on record
2 hospitalizations
Summary
HEDWIN CORPORATION has accumulated 23 OSHA violations across 7 inspections over 43 years of recorded history, with $4,220 in total assessed penalties.
The establishment sits in the 77th percentile for violations within its industry-state peer group of 66 employers. Inspection frequency runs at the 91st percentile. The most recent enforcement activity was recorded 12 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
HEDWIN CORPORATION appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification, FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
Inspections
7
0.2 / yr · last 43 yrs
Violations
23
0.5 / yr
Penalties
$4,220
$183 avg / violation
39% serious61% other
Inspection trigger · complaint
3 of 7
Inspection trigger · accident
2 of 7
71% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Peer comparison
77th
Above average violations in NAICS 3261 within MD. Peer group: 66 employers. This establishment has 23 OSHA violations; peer median is 9.
Fewer violationsMore violations
Penalty percentile
71st
peer median: $1,709
Inspection frequency
91st
peer median: 2
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for HEDWIN CORPORATION. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
Industry avg TRIR
3.1
BLS SOII 2024
Industry avg DART
1.4
BLS SOII 2024
Self-reported TRIR
—
Not in OSHA ITA
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Planned
2
Complaint
3
Accident
2
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for HEDWIN CORPORATION. Verify directly with Occupational Safety and Health Administration →
Activity timeline
Data refreshed
Weekly
First OSHA inspection
—
Most recent activity
12 years ago
No federal enforcement activity has been recorded against this establishment in 12+ years. Most recent activity: 12 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for HEDWIN CORPORATION. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for HEDWIN CORPORATION. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for HEDWIN CORPORATION. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC)
No H-1B, H-2A, or H-2B labor condition applications on file for HEDWIN CORPORATION. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for HEDWIN CORPORATION. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for HEDWIN CORPORATION. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
Obligated (5-yr)
$0
Obligated (all-time)
$3.6M
Awards
59
Top agency
General Services Administration
$2.4M
Top agencies by obligation (this location)
General Services Administration$2.4M
Agency for International Development$1.1M
Department of Defense$49K
Department of Agriculture$4K
Largest awards (top 50 of 59)
- Agency for International DevelopmentURGENT P.O. FOR 150,000 X 10L COLLAPISABLE WATER CONTAINERS FOR USE DURING HUMANITARIA AID MISSION.contract · Last action 2009-03-23$288,585
- Agency for International DevelopmentTHE CONTRACTOR WILL PROVIDE THE OFFICE OF FOREIGN DISASTER ASSISTANCE 194,400 10 LITER WATER CONTAINERS.contract · Last action 2011-06-15$254,664
- General Services AdministrationNFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYETHYLENE COMPOUND BLOW-MOLDED OR THERMOFORMED 0.010 IN THICK, FOR FOOD AND BEVERAGE USE. TESTED IAW ASTM D 1505, ASTM D 1238 & ASTM D 638. STRENGTH 1500 PSI MIN. TWENTY CONTAINERS W/CAPS,COLLAPSED & NESTED, TWENTY KNOCKED DOWN FIBERBOARD CONTAINERS & TWENTY HANDLES PACKED IN FIBERBOARD BOX,350 PSI BOX. NFES NUMBER MARKING REQUIRED. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX,contract · Last action 2010-01-22$196,940
- General Services AdministrationNFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYETHYLENE COMPOUND BLOW-MOLDED OR THERMOFORMED 0.010 IN THICK, FOR FOOD AND BEVERAGE USE. TESTED IAW ASTM D 1505, ASTM D 1238 & ASTM D 638. STRENGTH 1500 PSI MIN. TWENTY CONTAINERS W/CAPS,COLLAPSED & NESTED, TWENTY KNOCKED DOWN FIBERBOARD CONTAINERS & TWENTY HANDLES PACKED IN FIBERBOARD BOX,350 PSI BOX. NFES NUMBER MARKING REQUIRED. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX,contract · Last action 2010-01-20$187,093
- General Services AdministrationNFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYETHYLENE COMPOUND BLOW-MOLDED OR THERMOFORMED 0.010 IN THICK, FOR FOOD AND BEVERAGE USE. TESTED IAW ASTM D 1505, ASTM D 1238&ASTM D 638. STRENGTH 1500 PSI MIN. TWENTY CONTAINERS W/CAPS,COLLAPSED&NESTED, TWENTY KNOCKED DOWN FIBERBOARD CONTAINERS&TWENTY HANDLES PACKED IN FIBERBOARD BOX,350 PSI BOX. NFES NUMBER MARKING REQUIRED. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX,contract · Last action 2011-03-30$174,686
- General Services AdministrationNFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYETHYLENE COMPOUND BLOW-MOLDED OR THERMOFORMED 0.010 IN THICK, FOR FOOD AND BEVERAGE USE. TESTED IAW ASTM D 1505, ASTM D 1238&ASTM D 638. STRENGTH 1500 PSI MIN. TWENTY CONTAINERS W/CAPS,COLLAPSED&NESTED, TWENTY KNOCKED DOWN FIBERBOARD CONTAINERS&TWENTY HANDLES PACKED IN FIBERBOARD BOX,350 PSI BOX. NFES NUMBER MARKING REQUIRED. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX,contract · Last action 2013-04-08$147,705
- Agency for International DevelopmentPROCUREMENT OF 83,133 COLLAPSIBLE 10 LITER WATER CONTAINERScontract · Last action 2017-10-23$119,047
- Agency for International DevelopmentREPLENISHMENT OF COLLAPSIBLE WATER CONTAINERScontract · Last action 2017-08-31$119,046
- Agency for International DevelopmentPROCUREMENT OF 83,133 COLLAPSIBLE 10 LITER WATER CONTAINERScontract · Last action 2017-08-21$119,046
- General Services AdministrationNFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYETHYLENE COMPOUND BLOW-MOLDED OR THERMOFORMED 0.010 IN THICK, FOR FOOD AND BEVERAGE USE. TESTED IAW ASTM D 1505, ASTM D 1238&ASTM D 638. STRENGTH 1500 PSI MIN. TWENTY CONTAINERS W/CAPS,COLLAPSED&NESTED, TWENTY KNOCKED DOWN FIBERBOARD CONTAINERS&TWENTY HANDLES PACKED IN FIBERBOARD BOX,350 PSI BOX. NFES NUMBER MARKING REQUIRED. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX,contract · Last action 2013-07-02$98,470
- Agency for International DevelopmentD20114127-PURCHASE OF 72,000 WATER CONTAINERS OF PISA WAREHOUSE RE-STOCKcontract · Last action 2022-04-27$97,200
- General Services AdministrationNFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYETHYLENE COMPOUND BLOW-MOLDED OR THERMOFORMED 0.010 IN THICK, FOR FOOD AND BEVERAGE USE. TESTED IAW ASTM D 1505, ASTM D 1238 & ASTM D 638. STRENGTH 1500 PSI MIN. TWENTY CONTAINERS W/CAPS,COLLAPSED & NESTED, TWENTY KNOCKED DOWN FIBERBOARD CONTAINERS & TWENTY HANDLES PACKED IN FIBERBOARD BOX,350 PSI BOX. NFES NUMBER MARKING REQUIRED. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX,contract · Last action 2009-08-12$88,623
- Agency for International DevelopmentTHIS PURCHASE ORDER WAS ISSUED TO PROCURE 55,200 10LITER WATER CONTAINERS TO REPLENISH OFDA'S STOCKPILES.contract · Last action 2012-09-28$72,312
- General Services AdministrationNFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYETHYLENE COMPOUND BLOW-MOLDED OR THERMOFORMED 0.010 IN THICK, FOR FOOD AND BEVERAGE USE. TESTED IAW ASTM D 1505, ASTM D 1238&ASTM D 638. STRENGTH 1500 PSI MIN. TWENTY CONTAINERS W/CAPS,COLLAPSED&NESTED, TWENTY KNOCKED DOWN FIBERBOARD CONTAINERS&TWENTY HANDLES PACKED IN FIBERBOARD BOX,350 PSI BOX. NFES NUMBER MARKING REQUIRED. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX,contract · Last action 2012-03-19$71,935
- General Services AdministrationNFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYETHYLENE COMPOUND BLOW-MOLDED OR THERMOFORMED 0.010 IN THICK, FOR FOOD AND BEVERAGE USE. TESTED IAW ASTM D 1505, ASTM D 1238&ASTM D 638. STRENGTH 1500 PSI MIN. TWENTY CONTAINERS W/CAPS,COLLAPSED&NESTED, TWENTY KNOCKED DOWN FIBERBOARD CONTAINERS&TWENTY HANDLES PACKED IN FIBERBOARD BOX,350 PSI BOX. NFES NUMBER MARKING REQUIRED. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX,contract · Last action 2012-10-18$70,898
- General Services AdministrationNFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYETHYLENE COMPOUND BLOW-MOLDED OR THERMOFORMED 0.010 IN THICK, FOR FOOD AND BEVERAGE USE. TESTED IAW ASTM D 1505, ASTM D 1238&ASTM D 638. STRENGTH 1500 PSI MIN. TWENTY CONTAINERS W/CAPS,COLLAPSED&NESTED, TWENTY KNOCKED DOWN FIBERBOARD CONTAINERS&TWENTY HANDLES PACKED IN FIBERBOARD BOX,350 PSI BOX. NFES NUMBER MARKING REQUIRED. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX,contract · Last action 2011-05-12$70,898
- General Services AdministrationNFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYETHYLENE COMPOUND BLOW-MOLDED OR THERMOFORMED 0.010 IN THICK, FOR FOOD AND BEVERAGE USE. TESTED IAW ASTM D 1505, ASTM D 1238&ASTM D 638. STRENGTH 1500 PSI MIN. TWENTY CONTAINERS W/CAPS,COLLAPSED&NESTED, TWENTY KNOCKED DOWN FIBERBOARD CONTAINERS&TWENTY HANDLES PACKED IN FIBERBOARD BOX,350 PSI BOX. NFES NUMBER MARKING REQUIRED. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX,contract · Last action 2013-01-08$66,073
- General Services AdministrationNFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYETHYLENE COMPOUND BLOW-MOLDED OR THERMOFORMED 0.010 IN THICK, FOR FOOD AND BEVERAGE USE. TESTED IAW ASTM D 1505, ASTM D 1238&ASTM D 638. STRENGTH 1500 PSI MIN. TWENTY CONTAINERS W/CAPS,COLLAPSED&NESTED, TWENTY KNOCKED DOWN FIBERBOARD CONTAINERS&TWENTY HANDLES PACKED IN FIBERBOARD BOX,350 PSI BOX. NFES NUMBER MARKING REQUIRED. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX,contract · Last action 2012-12-03$66,073
- General Services AdministrationNFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYETHYLENE COMPOUND BLOW-MOLDED OR THERMOFORMED 0.010 IN THICK, FOR FOOD AND BEVERAGE USE. TESTED IAW ASTM D 1505, ASTM D 1238&ASTM D 638. STRENGTH 1500 PSI MIN. TWENTY CONTAINERS W/CAPS,COLLAPSED&NESTED, TWENTY KNOCKED DOWN FIBERBOARD CONTAINERS&TWENTY HANDLES PACKED IN FIBERBOARD BOX,350 PSI BOX. NFES NUMBER MARKING REQUIRED. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX,contract · Last action 2012-05-10$65,941
- General Services AdministrationNFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYcontract · Last action 2008-12-10$60,854
- General Services AdministrationNFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYcontract · Last action 2009-02-11$59,082
- General Services AdministrationNFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYETHYLENE COMPOUND BLOW-MOLDED OR THERMOFORMED 0.010 IN THICK, FOR FOOD AND BEVERAGE USE. TESTED IAW ASTM D 1505, ASTM D 1238&ASTM D 638. STRENGTH 1500 PSI MIN. TWENTY CONTAINERS W/CAPS,COLLAPSED&NESTED, TWENTY KNOCKED DOWN FIBERBOARD CONTAINERS&TWENTY HANDLES PACKED IN FIBERBOARD BOX,350 PSI BOX. NFES NUMBER MARKING REQUIRED. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX,contract · Last action 2012-02-16$56,949
- General Services AdministrationNFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYcontract · Last action 2008-01-30$52,707
- General Services AdministrationNFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYcontract · Last action 2007-12-28$52,078
- General Services AdministrationNFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYcontract · Last action 2007-11-27$51,450
- General Services AdministrationNFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYcontract · Last action 2008-04-03$51,360
- General Services AdministrationNFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYcontract · Last action 2008-11-06$51,303
- General Services AdministrationNFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYcontract · Last action 2007-10-31$49,025
- General Services AdministrationNFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYETHYLENE COMPOUND BLOW-MOLDED OR THERMOFORMED 0.010 IN THICK, FOR FOOD AND BEVERAGE USE. TESTED IAW ASTM D 1505, ASTM D 1238 & ASTM D 638. STRENGTH 1500 PSI MIN. TWENTY CONTAINERS W/CAPS,COLLAPSED & NESTED, TWENTY KNOCKED DOWN FIBERBOARD CONTAINERS & TWENTY HANDLES PACKED IN FIBERBOARD BOX,350 PSI BOX. NFES NUMBER MARKING REQUIRED. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX,contract · Last action 2010-01-20$48,841
- General Services AdministrationNFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYETHYLENE COMPOUND BLOW-MOLDED OR THERMOFORMED 0.010 IN THICK, FOR FOOD AND BEVERAGE USE. TESTED IAW ASTM D 1505, ASTM D 1238&ASTM D 638. STRENGTH 1500 PSI MIN. TWENTY CONTAINERS W/CAPS,COLLAPSED&NESTED, TWENTY KNOCKED DOWN FIBERBOARD CONTAINERS&TWENTY HANDLES PACKED IN FIBERBOARD BOX,350 PSI BOX. NFES NUMBER MARKING REQUIRED. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX,contract · Last action 2012-01-10$47,957
- General Services AdministrationNFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYETHYLENE COMPOUND BLOW-MOLDED OR THERMOFORMED 0.010 IN THICK, FOR FOOD AND BEVERAGE USE. TESTED IAW ASTM D 1505, ASTM D 1238&ASTM D 638. STRENGTH 1500 PSI MIN. TWENTY CONTAINERS W/CAPS,COLLAPSED&NESTED, TWENTY KNOCKED DOWN FIBERBOARD CONTAINERS&TWENTY HANDLES PACKED IN FIBERBOARD BOX,350 PSI BOX. NFES NUMBER MARKING REQUIRED. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX,contract · Last action 2011-12-14$47,957
- General Services AdministrationNFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYcontract · Last action 2009-01-07$44,312
- Department of Defense8501112863!KIT,WATER CONTAINERcontract · Last action 2014-07-03$40,964
- General Services AdministrationNFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYETHYLENE COMPOUND BLOW-MOLDED OR THERMOFORMED 0.010 IN THICK, FOR FOOD AND BEVERAGE USE. TESTED IAW ASTM D 1505, ASTM D 1238&ASTM D 638. STRENGTH 1500 PSI MIN. TWENTY CONTAINERS W/CAPS,COLLAPSED&NESTED, TWENTY KNOCKED DOWN FIBERBOARD CONTAINERS&TWENTY HANDLES PACKED IN FIBERBOARD BOX,350 PSI BOX. NFES NUMBER MARKING REQUIRED. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX,contract · Last action 2011-02-17$40,471
- General Services AdministrationNFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYETHYLENE COMPOUND BLOW-MOLDED OR THERMOFORMED 0.010 IN THICK, FOR FOOD AND BEVERAGE USE. TESTED IAW ASTM D 1505, ASTM D 1238&ASTM D 638. STRENGTH 1500 PSI MIN. TWENTY CONTAINERS W/CAPS,COLLAPSED&NESTED, TWENTY KNOCKED DOWN FIBERBOARD CONTAINERS&TWENTY HANDLES PACKED IN FIBERBOARD BOX,350 PSI BOX. NFES NUMBER MARKING REQUIRED. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX,contract · Last action 2011-01-13$40,176
- General Services AdministrationNFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYETHYLENE COMPOUND BLOW-MOLDED OR THERMOFORMED 0.010 IN THICK, FOR FOOD AND BEVERAGE USE. TESTED IAW ASTM D 1505, ASTM D 1238&ASTM D 638. STRENGTH 1500 PSI MIN. TWENTY CONTAINERS W/CAPS,COLLAPSED&NESTED, TWENTY KNOCKED DOWN FIBERBOARD CONTAINERS&TWENTY HANDLES PACKED IN FIBERBOARD BOX,350 PSI BOX. NFES NUMBER MARKING REQUIRED. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX,contract · Last action 2010-12-14$40,077
- General Services AdministrationTAS::47 4534 001::TAS NFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYETHYLENE COMPOUND BLOW-MOLDED OR THERMOFORMED 0.010 IN THICK, FOR FOOD AND BEVERAGE USE. TESTED IAW ASTM D 1505, ASTM D 1238&ASTM D 638. STRENGTH 1500 PSI MIN. TWENTY CONTAINERS W/CAPS,COLLAPSED&NESTED, TWENTY KNOCKED DOWN FIBERBOARD CONTAINERS&TWENTY HANDLES PACKED IN FIBERBOARD BOX,350 PSI BOX. NFES NUMBER MARKING REQUIRED. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX,contract · Last action 2010-11-16$40,077
- General Services AdministrationNFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYcontract · Last action 2009-03-10$39,388
- General Services AdministrationTAS::47 4534 001::TAS NFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYETHYLENE COMPOUND BLOW-MOLDED OR THERMOFORMED 0.010 IN THICK, FOR FOOD AND BEVERAGE USE. TESTED IAW ASTM D 1505, ASTM D 1238 & ASTM D 638. STRENGTH 1500 PSI MIN. TWENTY CONTAINERS W/CAPS,COLLAPSED & NESTED, TWENTY KNOCKED DOWN FIBERBOARD CONTAINERS & TWENTY HANDLES PACKED IN FIBERBOARD BOX,350 PSI BOX. NFES NUMBER MARKING REQUIRED. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX,contract · Last action 2010-10-18$39,290
- General Services AdministrationNFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYETHYLENE COMPOUND BLOW-MOLDED OR THERMOFORMED 0.010 IN THICK, FOR FOOD AND BEVERAGE USE. TESTED IAW ASTM D 1505, ASTM D 1238&ASTM D 638. STRENGTH 1500 PSI MIN. TWENTY CONTAINERS W/CAPS,COLLAPSED&NESTED, TWENTY KNOCKED DOWN FIBERBOARD CONTAINERS&TWENTY HANDLES PACKED IN FIBERBOARD BOX,350 PSI BOX. NFES NUMBER MARKING REQUIRED. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX,contract · Last action 2011-06-14$35,968
- General Services AdministrationNFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYcontract · Last action 2008-02-26$34,928
- General Services AdministrationNFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYETHYLENE COMPOUND BLOW-MOLDED OR THERMOFORMED 0.010 IN THICK, FOR FOOD AND BEVERAGE USE. TESTED IAW ASTM D 1505, ASTM D 1238&ASTM D 638. STRENGTH 1500 PSI MIN. TWENTY CONTAINERS W/CAPS,COLLAPSED&NESTED, TWENTY KNOCKED DOWN FIBERBOARD CONTAINERS&TWENTY HANDLES PACKED IN FIBERBOARD BOX,350 PSI BOX. NFES NUMBER MARKING REQUIRED. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX,contract · Last action 2011-05-25$19,694
- General Services AdministrationNFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYETHYLENE COMPOUND BLOW-MOLDED OR THERMOFORMED 0.010 IN THICK, FOR FOOD AND BEVERAGE USE. TESTED IAW ASTM D 1505, ASTM D 1238&ASTM D 638. STRENGTH 1500 PSI MIN. TWENTY CONTAINERS W/CAPS,COLLAPSED&NESTED, TWENTY KNOCKED DOWN FIBERBOARD CONTAINERS&TWENTY HANDLES PACKED IN FIBERBOARD BOX,350 PSI BOX. NFES NUMBER MARKING REQUIRED. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX,contract · Last action 2011-03-16$15,755
- General Services AdministrationTAS::47 4534 001::TAS NFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYETHYLENE COMPOUND BLOW-MOLDED OR THERMOFORMED 0.010 IN THICK, FOR FOOD AND BEVERAGE USE. TESTED IAW ASTM D 1505, ASTM D 1238 & ASTM D 638. STRENGTH 1500 PSI MIN. TWENTY CONTAINERS W/CAPS,COLLAPSED & NESTED, TWENTY KNOCKED DOWN FIBERBOARD CONTAINERS & TWENTY HANDLES PACKED IN FIBERBOARD BOX,350 PSI BOX. NFES NUMBER MARKING REQUIRED. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX,contract · Last action 2010-10-07$15,270
- Agency for International DevelopmentPURCHASE OF 10,200 WATER CONTAINERS FROM HEDWIN CORPORATION UNDER OUR BPA AGREEMENT IN PLACEcontract · Last action 2017-11-02$14,239
- General Services AdministrationTAS::47 4534 001::TAS NFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYETHYLENE COMPOUND BLOW-MOLDED OR THERMOFORMED 0.010 IN THICK, FOR FOOD AND BEVERAGE USE. TESTED IAW ASTM D 1505, ASTM D 1238 & ASTM D 638. STRENGTH 1500 PSI MIN. TWENTY CONTAINERS W/CAPS,COLLAPSED & NESTED, TWENTY KNOCKED DOWN FIBERBOARD CONTAINERS & TWENTY HANDLES PACKED IN FIBERBOARD BOX,350 PSI BOX. NFES NUMBER MARKING REQUIRED. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX,contract · Last action 2010-06-08$12,309
- General Services AdministrationNFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYcontract · Last action 2008-10-03$11,853
- General Services AdministrationTAS::47 4534 001::TAS NFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYETHYLENE COMPOUND BLOW-MOLDED OR THERMOFORMED 0.010 IN THICK, FOR FOOD AND BEVERAGE USE. TESTED IAW ASTM D 1505, ASTM D 1238 & ASTM D 638. STRENGTH 1500 PSI MIN. TWENTY CONTAINERS W/CAPS,COLLAPSED & NESTED, TWENTY KNOCKED DOWN FIBERBOARD CONTAINERS & TWENTY HANDLES PACKED IN FIBERBOARD BOX,350 PSI BOX. NFES NUMBER MARKING REQUIRED. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX,contract · Last action 2010-04-08$11,816
- General Services AdministrationNFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYETHYLENE COMPOUND BLOW-MOLDED OR THERMOFORMED 0.010 IN THICK, FOR FOOD AND BEVERAGE USE. TESTED IAW ASTM D 1505, ASTM D 1238&ASTM D 638. STRENGTH 1500 PSI MIN. TWENTY CONTAINERS W/CAPS,COLLAPSED&NESTED, TWENTY KNOCKED DOWN FIBERBOARD CONTAINERS&TWENTY HANDLES PACKED IN FIBERBOARD BOX,350 PSI BOX. NFES NUMBER MARKING REQUIRED. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX,contract · Last action 2011-10-06$10,726
- General Services AdministrationNFES 0048, CONTAINER,PLASTIC MOLDED:BOX OF 20 W/OVERPACK BOXES, CAPACITY 5.0 GALLON,LOW DENSITY POLYETHYLENE COMPOUND BLOW-MOLDED OR THERMOFORMED 0.010 IN THICK, FOR FOOD AND BEVERAGE USE. TESTED IAW ASTM D 1505, ASTM D 1238&ASTM D 638. STRENGTH 1500 PSI MIN. TWENTY CONTAINERS W/CAPS,COLLAPSED&NESTED, TWENTY KNOCKED DOWN FIBERBOARD CONTAINERS&TWENTY HANDLES PACKED IN FIBERBOARD BOX,350 PSI BOX. NFES NUMBER MARKING REQUIRED. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLETIZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX,contract · Last action 2011-04-13$10,635
Federal contract dollars to this establishment. Primary NAICS: 326160 - PLASTICS BOTTLE MANUFACTURING. Last action: 2022-04-27. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2014-01-15 | Complaint | 4 | — | $0 | |
| 2012-07-24 | Complaint | 2 | — | $2,280 | |
| 2003-08-19 | Complaint | 0 | — | $0 | |
| 2001-01-30 | Planned | 10 | 5 | $900 | |
| 1991-11-25 | Planned | 6 | 3 | $750 | |
| 1983-04-19 | Accident | 1 | 1 | $290 | |
| 1983-04-11 | Accident | 0 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in unlaminated plastics profile shape manufacturing within MD, ordered by federal enforcement volume:
- FLUORON, INC.ELKTON — 1 federal enforcement record
- LIFE-LIKE PRODUCTS, LLCBALTIMORE — 1 federal enforcement record
- CONSTAR INTERNATIONAL INCHAVRE DE GRACE — 1 federal enforcement record
- PRODUCTION SCIENCES, INCORPORATEDCHESTERTOWN — 1 federal enforcement record
- CAPTIVE PLASTICS, INC.HANOVER — 1 federal enforcement record
Related searches
- Unlaminated Plastics Profile Shape ManufacturingAll employers in this industry
- Employers in MDState-wide enforcement data
- Unlaminated Plastics Profile in MDIndustry × state cross-filter
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →About this data
This profile aggregates federal enforcement records on HEDWIN CORPORATION from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Frequently asked
- What is HEDWIN CORPORATION's OSHA violation history?
- HEDWIN CORPORATION has 7 OSHA inspections on record with 23 violations and $4,220 in total penalties.
- How does HEDWIN CORPORATION's safety record compare to its industry?
- HEDWIN CORPORATION operates in the unlaminated plastics profile shape manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.1.