Establishment profile
HALL MACHINE & WELDING CO
102 WEST MERMOD STREET, CARLSBAD, NM, 88220
332710 — Machine Shops
Summary
HALL MACHINE & WELDING CO has accumulated 35 OSHA violations across 7 inspections over 35 years of recorded history, with $4,530 in total assessed penalties.
The establishment sits in the 100th percentile for violations within its industry-state peer group of 18 employers. Inspection frequency runs at the 100th percentile. The most recent enforcement activity was recorded 3 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
HALL MACHINE & WELDING CO appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
71% of inspections at this establishment produced violations, with 5 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 30 citations in this view · $4,530 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A01 | 2 | 2 | $600 | Apr 2002 | Jan 2011 |
| 29 CFR 1910.1200 E01 | 2 | 2 | $600 | Apr 2002 | May 2004 |
| 29 CFR 1910.0022 A01 | 2 | 2 | $360 | Feb 1991 | Jan 2011 |
| 29 CFR 1910.0305 G02 II | 2 | 2 | $300 | Apr 2002 | Jan 2011 |
| 29 CFR 1910.0305 B01 | 2 | 2 | $300 | Feb 1991 | Apr 2002 |
| 29 CFR 1910.0243 C01 | 2 | 2 | $300 | Feb 1991 | Apr 2002 |
| 29 CFR 1910.0242 B | 2 | 2 | $200 | Feb 1994 | Apr 2002 |
| 29 CFR 1910.0134 A02 | 2 | 2 | $50 | Feb 1991 | Feb 1994 |
| 29 CFR 1910.0305 G02 III | 2 | 2 | — | Apr 2002 | Jan 2011 |
| 29 CFR 1910.0305 J01 I | 2 | 2 | — | Feb 1991 | Apr 2002 |
| 29 CFR 1910.0134 I07 | 1 | 1 | $500 | May 2004 | May 2004 |
| 29 CFR 1910.0106 D04 I | 1 | 1 | $420 | Feb 1991 | Feb 1991 |
| 29 CFR 1910.0254 B02 IIG | 1 | 1 | $300 | Jan 2011 | Jan 2011 |
| 29 CFR 1910.0134 C01 | 1 | 1 | $300 | May 2004 | May 2004 |
| 29 CFR 1910.0134 D02 II | 1 | 1 | $250 | Feb 1994 | Feb 1994 |
| 29 CFR 1910.0252 B04 III | 1 | 1 | $50 | Feb 1994 | Feb 1994 |
| 29 CFR 1904.0002 A | 1 | 1 | — | Apr 2002 | Apr 2002 |
| 29 CFR 1910.0254 D09 III | 1 | 1 | — | Apr 2002 | Apr 2002 |
| 29 CFR 1910.0157 E01 | 1 | 1 | — | Apr 2002 | Apr 2002 |
| 29 CFR 1910.0334 A02 II | 1 | 1 | — | Apr 2002 | Apr 2002 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer in NAICS 3327 within NM. Peer group: 18 employers. This establishment has 35 OSHA violations; peer median is 5.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for HALL MACHINE & WELDING CO. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for HALL MACHINE & WELDING CO. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 3+ years. Most recent activity: 3 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for HALL MACHINE & WELDING CO. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for HALL MACHINE & WELDING CO. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for HALL MACHINE & WELDING CO. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for HALL MACHINE & WELDING CO. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for HALL MACHINE & WELDING CO. Verify directly with Environmental Protection Agency →
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for HALL MACHINE & WELDING CO. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of the InteriorSEAMLESS STAINLESS STEEL TUBINGcontract · Last action 2008-08-13$7,198
Federal contract dollars to this establishment. Primary NAICS: 332312 - FABRICATED STRUCTURAL METAL MANUFACTURING. Last action: 2008-08-13. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2022-06-23 | Planned | 0 | — | $0 | |
| 2010-09-29 | Referral | 5 | 4 | $900 | |
| 2008-08-20 | Referral | 0 | — | $0 | |
| 2004-03-11 | Planned | 3 | 2 | $1,400 | |
| 2002-03-27 | Planned | 14 | 8 | $600 | |
| 1993-12-09 | Planned | 4 | 2 | $550 | |
| 1991-01-23 | Planned | 9 | 3 | $1,080 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within NM, ordered by federal enforcement volume:
- INDUSTRIAL REPAIR SERVICEFARMINGTON — 2 federal enforcement records
- THE MACHINE SHOP INCLAS CRUCES — 1 federal enforcement record
- BLAIR MACHINE INCHOBBS — 1 federal enforcement record
- NOLAN BRUNSON INC.HOBBS — 1 federal enforcement record
- G & B MACHINE INC.CARLSBAD — 1 federal enforcement record
- HOPPER SPECIALITY COALBUQUERQUE — 1 federal enforcement record
- CLAY GROOMER MACHINE SHOPFARMINGTON — 1 federal enforcement record
- SIERRA PEAKS, INC.ALBUQUERQUE — 1 federal enforcement record
- ACCURATE MACHINE & TOOL CO.LOS LUNAS — 1 federal enforcement record
- THE MACHINE SHOP, INC.ROSWELL — 1 federal enforcement record
Related searches
- Machine ShopsAll employers in this industry
- Employers in NMState-wide enforcement data
- Machine Shops in NMIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on HALL MACHINE & WELDING CO from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is HALL MACHINE & WELDING CO's OSHA violation history?
- HALL MACHINE & WELDING CO has 7 OSHA inspections on record with 35 violations and $4,530 in total penalties.
- How does HALL MACHINE & WELDING CO's safety record compare to its industry?
- HALL MACHINE & WELDING CO operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7.