Establishment profile
H. HOLCOMB & SON WELDING AND MACHINE WORKS, INC.
315 E. LEWIS STREET, ANNA, IL, 62906
333999 — All Other Miscellaneous General Purpose Machinery Manufacturing
Summary
H. HOLCOMB & SON WELDING AND MACHINE WORKS, INC. has accumulated 42 OSHA violations across 4 inspections over 38 years of recorded history, with $6,560 in total assessed penalties.
The establishment sits in the 98th percentile for violations within its industry-state peer group of 197 employers. Inspection frequency runs at the 88th percentile. The most recent enforcement activity was recorded 22 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
H. HOLCOMB & SON WELDING AND MACHINE WORKS, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
75% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 21 citations in this view · $6,560 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A01 | 2 | 2 | $845 | Apr 1988 | Mar 2004 |
| 29 CFR 1910.0212 A03 II | 1 | 1 | $1,050 | Mar 2004 | Mar 2004 |
| 29 CFR 1910.0184 D | 1 | 1 | $1,050 | Mar 2004 | Mar 2004 |
| 5A0001 | 1 | 1 | $525 | Mar 2004 | Mar 2004 |
| 29 CFR 1910.0107 C06 | 1 | 1 | $420 | Apr 1988 | Apr 1988 |
| 29 CFR 1910.0134 A02 | 1 | 1 | $400 | May 1988 | May 1988 |
| 29 CFR 1910.0244 B | 1 | 1 | $350 | Apr 1988 | Apr 1988 |
| 29 CFR 1910.1200 G01 | 1 | 1 | $320 | May 1988 | May 1988 |
| 29 CFR 1910.1200 H | 1 | 1 | $320 | May 1988 | May 1988 |
| 29 CFR 1910.1200 D06 | 1 | 1 | $320 | May 1988 | May 1988 |
| 29 CFR 1910.1200 F04 I | 1 | 1 | $320 | May 1988 | May 1988 |
| 29 CFR 1910.0217 C02 IB | 1 | 1 | $320 | Apr 1988 | Apr 1988 |
| 29 CFR 1910.0132 A | 1 | 1 | $320 | Apr 1988 | Apr 1988 |
| 29 CFR 1910.0212 A03 III | 1 | 1 | — | Mar 2004 | Mar 2004 |
| 29 CFR 1910.0184 I09 III | 1 | 1 | — | Mar 2004 | Mar 2004 |
| 29 CFR 1910.1200 F04 II | 1 | 1 | — | May 1988 | May 1988 |
| 29 CFR 1910.1200 E01 | 1 | 1 | — | May 1988 | May 1988 |
| 29 CFR 1910.1000 A02 | 1 | 1 | — | May 1988 | May 1988 |
| 29 CFR 1910.1000 E | 1 | 1 | — | May 1988 | May 1988 |
| 29 CFR 1910.0184 E03 I | 1 | 1 | — | Apr 1988 | Apr 1988 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer in NAICS 3339 within IL. Peer group: 197 employers. This establishment has 42 OSHA violations; peer median is 2.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for H. HOLCOMB & SON WELDING AND MACHINE WORKS, INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for H. HOLCOMB & SON WELDING AND MACHINE WORKS, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 22+ years. Most recent activity: 22 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for H. HOLCOMB & SON WELDING AND MACHINE WORKS, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for H. HOLCOMB & SON WELDING AND MACHINE WORKS, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for H. HOLCOMB & SON WELDING AND MACHINE WORKS, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for H. HOLCOMB & SON WELDING AND MACHINE WORKS, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for H. HOLCOMB & SON WELDING AND MACHINE WORKS, INC.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for H. HOLCOMB & SON WELDING AND MACHINE WORKS, INC.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2004-03-01 | Complaint | 6 | 6 | $3,150 | |
| 2000-02-14 | Programmed Other | 0 | — | $0 | |
| 1988-03-30 | Referral | 20 | 8 | $1,410 | |
| 1988-02-16 | Complaint | 16 | 12 | $2,000 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Related searches
- All Other Miscellaneous General Purpose Machinery ManufacturingAll employers in this industry
- Employers in ILState-wide enforcement data
- All Other Miscellaneous in ILIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on H. HOLCOMB & SON WELDING AND MACHINE WORKS, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is H. HOLCOMB & SON WELDING AND MACHINE WORKS, INC.'s OSHA violation history?
- H. HOLCOMB & SON WELDING AND MACHINE WORKS, INC. has 4 OSHA inspections on record with 42 violations and $6,560 in total penalties.
- How does H. HOLCOMB & SON WELDING AND MACHINE WORKS, INC.'s safety record compare to its industry?
- H. HOLCOMB & SON WELDING AND MACHINE WORKS, INC. operates in the all other miscellaneous general purpose machinery manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.