Establishment profile
GUNZE PLASTICS & ENGINEERING CORP. OF AMERICA
1400 S. HAMILTON CIR., OLATHE, KS, 66061
EIN 742650016
Summary
GUNZE PLASTICS & ENGINEERING CORP. OF AMERICA has accumulated 41 OSHA violations across 6 inspections over 25 years of recorded history, with $37,710 in total assessed penalties.
The establishment sits in the 100th percentile for violations within its industry-state peer group of 53 employers. Inspection frequency runs at the 94th percentile. The most recent enforcement activity was recorded 13 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
GUNZE PLASTICS & ENGINEERING CORP. OF AMERICA appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 6 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 28 citations in this view · $37,065 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A01 | 3 | 3 | $5,563 | Jul 2008 | Aug 2013 |
| 29 CFR 1910.0305 B01 | 3 | 3 | $800 | Aug 2002 | Jul 2008 |
| 29 CFR 1910.0219 D01 | 2 | 2 | $4,760 | Mar 2011 | Aug 2013 |
| 29 CFR 1910.0023 A08 | 2 | 2 | $1,950 | Oct 2000 | Aug 2002 |
| 29 CFR 1910.0022 A02 | 2 | 2 | $1,750 | Oct 2000 | Aug 2013 |
| 29 CFR 1910.0303 G02 I | 2 | 2 | $800 | Oct 2000 | Jul 2008 |
| 29 CFR 1910.0147 D04 I | 1 | 1 | $4,900 | Aug 2013 | Aug 2013 |
| 29 CFR 1910.0219 C04 I | 1 | 1 | $2,940 | Mar 2011 | Mar 2011 |
| 29 CFR 1910.0147 C07 I | 1 | 1 | $2,450 | Aug 2013 | Aug 2013 |
| 5A0001 | 1 | 1 | $1,750 | Aug 2013 | Aug 2013 |
| 29 CFR 1910.0253 B04 III | 1 | 1 | $1,750 | Aug 2013 | Aug 2013 |
| 29 CFR 1910.0307 C02 I | 1 | 1 | $1,750 | Aug 2013 | Aug 2013 |
| 29 CFR 1910.0219 F03 | 1 | 1 | $1,470 | Mar 2011 | Mar 2011 |
| 29 CFR 1910.0305 J01 I | 1 | 1 | $1,050 | Aug 2013 | Aug 2013 |
| 29 CFR 1910.0147 C01 | 1 | 1 | $750 | Jul 2008 | Jul 2008 |
| 29 CFR 1910.0147 C04 I | 1 | 1 | $750 | Jul 2008 | Jul 2008 |
| 29 CFR 1910.0179 J02 | 1 | 1 | $600 | Jul 2008 | Jul 2008 |
| 29 CFR 1910.0303 F02 | 1 | 1 | $450 | Jul 2008 | Jul 2008 |
| 29 CFR 1910.0305 J01 I | 1 | 1 | $450 | Jul 2008 | Jul 2008 |
| 29 CFR 1910.0215 A04 | 1 | 1 | $383 | Jul 2008 | Jul 2008 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer in NAICS 3222 within KS. Peer group: 53 employers. This establishment has 41 OSHA violations; peer median is 3.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 50 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for GUNZE PLASTICS & ENGINEERING CORP. OF AMERICA. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 13+ years. Most recent activity: 13 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for GUNZE PLASTICS & ENGINEERING CORP. OF AMERICA. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for GUNZE PLASTICS & ENGINEERING CORP. OF AMERICA. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for GUNZE PLASTICS & ENGINEERING CORP. OF AMERICA. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for GUNZE PLASTICS & ENGINEERING CORP. OF AMERICA. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for GUNZE PLASTICS & ENGINEERING CORP. OF AMERICA. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for GUNZE PLASTICS & ENGINEERING CORP. OF AMERICA. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2013-03-20 | Planned | 15 | 8 | $19,950 | |
| 2011-01-26 | Planned | 5 | 5 | $9,800 | |
| 2008-07-02 | Planned | 11 | 11 | $5,048 | |
| 2005-09-19 | Planned | 3 | 2 | $613 | |
| 2002-07-17 | Planned | 4 | — | $1,600 | |
| 2000-10-11 | Complaint | 3 | 2 | $700 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in this industry within KS, ordered by federal enforcement volume:
- PACKAGING PRODUCTS CORPORATION LLCMISSION — 2 federal enforcement records
- BAGCRAFT PAPERCONBAXTER SPRINGS — 1 federal enforcement record
- HUHTAMAKI CONSUMER PACKAGING, INC.DE SOTO — 1 federal enforcement record
- BAGCRAFTPAPERCONBAXTER SPRINGS — 1 federal enforcement record
- API FOILS, INC.LAWRENCE — 1 federal enforcement record
Related searches
- NAICS 322All employers in this industry
- Employers in KSState-wide enforcement data
- Industry in KSIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on GUNZE PLASTICS & ENGINEERING CORP. OF AMERICA from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is GUNZE PLASTICS & ENGINEERING CORP. OF AMERICA's OSHA violation history?
- GUNZE PLASTICS & ENGINEERING CORP. OF AMERICA has 6 OSHA inspections on record with 41 violations and $37,710 in total penalties.