Establishment profile
GULL TOOL AND MACHINE COMPANY
3033 47TH AVE. NORTH, 1109PETERSBURG, FL, 33714
Summary
GULL TOOL AND MACHINE COMPANY has accumulated 37 OSHA violations across 1 inspection over 33 years of recorded history, with $3,000 in total assessed penalties.
The establishment sits in the 100th percentile for violations within its industry-state peer group of 71,901 employers. The most recent enforcement activity was recorded 33 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
GULL TOOL AND MACHINE COMPANY appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 22 citations in this view · $2,640 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.1200 G08 | 2 | 1 | $120 | Aug 1993 | Aug 1993 |
| 29 CFR 1910.0217 E01 I | 2 | 1 | $90 | Aug 1993 | Aug 1993 |
| 29 CFR 1910.1200 H | 1 | 1 | $450 | Aug 1993 | Aug 1993 |
| 29 CFR 1910.0133 A06 | 1 | 1 | $120 | Aug 1993 | Aug 1993 |
| 29 CFR 1910.0215 B09 | 1 | 1 | $120 | Aug 1993 | Aug 1993 |
| 29 CFR 1910.0022 D01 | 1 | 1 | $120 | Aug 1993 | Aug 1993 |
| 29 CFR 1910.0023 C01 | 1 | 1 | $120 | Aug 1993 | Aug 1993 |
| 29 CFR 1910.0147 C01 | 1 | 1 | $120 | Aug 1993 | Aug 1993 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $120 | Aug 1993 | Aug 1993 |
| 29 CFR 1910.0212 A03 II | 1 | 1 | $120 | Aug 1993 | Aug 1993 |
| 29 CFR 1910.0215 A02 | 1 | 1 | $120 | Aug 1993 | Aug 1993 |
| 29 CFR 1910.0217 B04 I | 1 | 1 | $120 | Aug 1993 | Aug 1993 |
| 29 CFR 1910.0219 D01 | 1 | 1 | $120 | Aug 1993 | Aug 1993 |
| 29 CFR 1910.0303 B02 | 1 | 1 | $120 | Aug 1993 | Aug 1993 |
| 29 CFR 1910.0303 G01 II | 1 | 1 | $120 | Aug 1993 | Aug 1993 |
| 29 CFR 1910.0304 A02 | 1 | 1 | $120 | Aug 1993 | Aug 1993 |
| 29 CFR 1910.0305 B01 | 1 | 1 | $120 | Aug 1993 | Aug 1993 |
| 29 CFR 1910.0305 B02 | 1 | 1 | $120 | Aug 1993 | Aug 1993 |
| 29 CFR 1910.0151 C | 1 | 1 | $90 | Aug 1993 | Aug 1993 |
| 29 CFR 1910.1200 E01 | 1 | 1 | $90 | Aug 1993 | Aug 1993 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer. Peer group: 71,901 employers. This establishment has 37 OSHA violations; peer median is 2.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for GULL TOOL AND MACHINE COMPANY. Verify directly with OSHA Injury Tracking Application →
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for GULL TOOL AND MACHINE COMPANY. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 33+ years. Most recent activity: 33 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for GULL TOOL AND MACHINE COMPANY. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for GULL TOOL AND MACHINE COMPANY. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for GULL TOOL AND MACHINE COMPANY. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for GULL TOOL AND MACHINE COMPANY. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for GULL TOOL AND MACHINE COMPANY. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for GULL TOOL AND MACHINE COMPANY. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 1993-06-16 | Complaint | 37 | 32 | $3,000 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Related searches
- Employers in FLState-wide enforcement data
About this data
This profile aggregates federal enforcement records on GULL TOOL AND MACHINE COMPANY from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is GULL TOOL AND MACHINE COMPANY's OSHA violation history?
- GULL TOOL AND MACHINE COMPANY has 1 OSHA inspection on record with 37 violations and $3,000 in total penalties.