Establishment profile
GUICO MACHINE WORKS, INC
1170 DESTREHAN AVENUE, HARVEY, LA, 70058
332710 — Machine Shops
Summary
GUICO MACHINE WORKS, INC has accumulated 4 OSHA violations across 3 inspections over 21 years of recorded history, with $2,100 in total assessed penalties.
The establishment sits in the 60th percentile for violations within its industry-state peer group of 245 employers. Inspection frequency runs at the 74th percentile. The most recent enforcement activity was recorded 6 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
GUICO MACHINE WORKS, INC appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification, FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
33% of inspections at this establishment produced violations,
Peer comparison
Above average violations in NAICS 3327 within LA. Peer group: 245 employers. This establishment has 4 OSHA violations; peer median is 2.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for GUICO MACHINE WORKS, INC. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for GUICO MACHINE WORKS, INC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 6+ years. Most recent activity: 6 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for GUICO MACHINE WORKS, INC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for GUICO MACHINE WORKS, INC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for GUICO MACHINE WORKS, INC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC)
No H-1B, H-2A, or H-2B labor condition applications on file for GUICO MACHINE WORKS, INC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for GUICO MACHINE WORKS, INC. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for GUICO MACHINE WORKS, INC. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of Defense4507593058!VALVE,GATcontract · Last action 2008-05-13$745,000
- Department of Defense4521690596!VALVE ASSEMBLY,QUICcontract · Last action 2012-06-27$124,802
- Department of Defense4508599571!VALVE ASScontract · Last action 2008-09-10$117,822
- Department of Defense4506250641!VALVE,GATcontract · Last action 2007-12-05$111,280
- Department of Defense4505784985!VALVE,GATcontract · Last action 2007-10-05$111,280
- Department of Defense4511994031!WYE,QUICK DISCONNECcontract · Last action 2009-09-19$93,225
- Department of Homeland SecurityRIVER SHACKLEScontract · Last action 2009-05-06$81,932
- Department of Homeland SecurityRIVER SHACKLEScontract · Last action 2015-03-18$78,354
- Department of Defense4505878983!VALVE,BALcontract · Last action 2007-10-19$71,250
- Department of Homeland SecurityRIVER SHACKLEScontract · Last action 2009-05-06$61,322
- Department of Defense4512625763!WYE,QUICK DISCONNECcontract · Last action 2009-11-24$60,010
- Department of Defense4521193975!VALVE ASSEMBLY,QUICcontract · Last action 2012-05-03$55,728
- Department of Homeland SecurityPURCHASE RIVER SHACKLES IAW CONTRACT NO: HSCG84-05-D-AA8121contract · Last action 2016-01-27$55,297
- Department of Homeland SecurityPURCHASE RIVER SHACKLES IAW CONTRACT NO: HSCG-05-D-AA121 GUICO MACHINE WORKScontract · Last action 2016-01-27$50,270
- Department of Homeland SecurityTHE CONTRACTOR IS TO PROCURE AND DELIVER 5/8 INCH DIAMETER GRADE "A" TYPE IV ROUND PIN ANCHOR SHACKLES TO VARIOUS USCG CUTTERS LOCATED THROUGHOUT THE UNITED STATES.contract · Last action 2015-03-18$49,572
- Department of Defense4519218971!BOAcontract · Last action 2011-09-27$44,376
- Department of Homeland Security5/8" RIVER SHACKLEScontract · Last action 2014-11-26$43,447
- Department of Homeland SecurityDELIVER RIVER SHACKLES IAW CONTRACT HSCG84-05-D-AA8121contract · Last action 2015-04-22$39,119
- Department of Homeland SecurityRIVER SHACKLEScontract · Last action 2010-12-02$37,017
- Department of Defense4506495640!VALVE ASScontract · Last action 2008-01-09$36,176
- Department of Defense4506313406!VALVE ASScontract · Last action 2007-12-12$36,176
- Department of Homeland SecurityDELIVER 5/8" RIVER SHACKLES IAW HSCG84-05-D-AA8121contract · Last action 2013-06-11$33,590
- Department of Homeland SecurityTHE CONTRACTOR IS TO PROCURE AND DELIVER 5/8 INCH DIAMETER GRADE "A" TYPE IV PIN ANCHOR RIVER SHACKLES IN ACCORDANCE WITH THE TERMS AND CONDITIONS OF THE CONTRACT.contract · Last action 2015-03-18$32,130
- Department of Homeland Security5/8" RIVER SHACKLEScontract · Last action 2013-06-11$31,615
- Department of Homeland Security5/8 RIVER SHACKLES FOR CGC OSAGE, CHENA, GREENBRIER, AND WEDGE.contract · Last action 2015-06-16$30,436
- Department of Homeland SecurityTHE CONTRACTOR IS TO PROCURE AND DELIVER 5/8 INCH DIAMETER, GRADE "A" TYPE IV ROUND PIN RIVER ANCHOR SHACKLES TO USCGC CHEYENNE AND USCGC KANAWHA FOR USCG DISTRICT 8, NEW ORLEANS, LA.contract · Last action 2009-04-14$29,835
- Department of Defense4519201303!VALVE ASSEMBLY,QUICcontract · Last action 2011-09-26$28,122
- Department of Homeland Security5/8 RIVER SHACKLES FOR CGC KICKAPOO, SCIOTO, AND GASCONADE.contract · Last action 2015-06-16$25,775
- Department of Homeland Security5/8" RIVER SHACKLEScontract · Last action 2014-11-25$22,306
- Department of Homeland SecurityRIVER SHACKLEScontract · Last action 2011-08-16$21,936
- Department of Homeland Security5/8 RIVER SHACKLES FOR CGC WYACONDA&CHENA.contract · Last action 2015-03-04$21,479
- Department of Homeland SecurityMANUFACTURE AND DELIVER RIVER SHACKLES IN IAW CONTRACT HSCG84-05-D-AA8121contract · Last action 2012-05-01$21,022
- Department of Defense4505776154!VALVE ASScontract · Last action 2007-10-04$20,748
- Department of Homeland SecurityTHE CONTRACTOR IS TO PROCURE AND DELIVER 5/8 INCH DIAMETER GRADE "A" TYPE IV PIN ANCHOR SHACKLES TO VARIOUS USCG CUTTERS LOCATED THROUGHOUT THE UNITED STATES.contract · Last action 2015-03-18$20,655
- Department of Homeland SecurityRIVER SHACKLEScontract · Last action 2011-08-16$20,565
- Department of Homeland SecurityRIVER SHACKLEScontract · Last action 2009-05-06$19,737
- Department of Homeland Security5/8TH INCH RIVER SHACKLES FOR ANT EUFAULA AND CGC KANAWHAcontract · Last action 2013-06-11$19,194
- Department of Homeland SecurityTHE CONTRACTOR IS TO PROCURE AND DELIVER 5/8 INCH DIAMETER GRADE "A" TYPE IV ROUND PIN ANCHOR SHACKLES TO VARIOUS USCG CUTTERS LOCATED THROUGHOUT THE UNITED STATES.contract · Last action 2015-03-18$18,360
- Department of Homeland Security5/8" RIVER SINKERScontract · Last action 2014-11-26$17,457
- Department of Homeland SecurityRIVER SHACKLEScontract · Last action 2010-11-24$17,366
- Department of Defense4505776155!VALVE ASScontract · Last action 2007-10-04$16,380
- Department of Homeland SecurityRIVER SHACKLEScontract · Last action 2015-03-18$16,157
- Department of Defense4506993869!VALVE,BALcontract · Last action 2008-03-06$15,813
- Department of Homeland SecurityDELIVER RIVER SHACKLES IAW CONTRACT HSCG84-05-D-AA8121contract · Last action 2015-04-07$15,127
- Department of Homeland SecuritySHACKLES FOR CGC KANAWHAcontract · Last action 2012-04-16$14,715
- Department of Homeland Security5/8" RIVER SHACKLEScontract · Last action 2013-06-11$13,801
- Department of Homeland SecurityITEM #09001 PRODUCE AND DELIVER 5/8 INCH DIAMETER, GRADE A TYPE "IV ROUND PIN ANCHOR SHACKLES.contract · Last action 2015-03-19$13,710
- Department of Homeland SecuritySHACKLES FOR CHENAcontract · Last action 2011-08-16$13,710
- Department of Homeland Security5/8 RIVER SHACKELS FOR CGC GASCONADcontract · Last action 2010-08-26$13,311
- Department of Homeland SecuritySHACKLES IAW CONTRACT NO: HSCG84-05-D-AA8121contract · Last action 2013-06-27$13,253
Federal contract dollars to this establishment. Primary NAICS: 333999 - ALL OTHER MISCELLANEOUS GENERAL PURPOSE MACHINERY MANUFACTURING. Last action: 2016-03-16. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2019-12-11 | Planned | 0 | — | $0 | |
| 2011-05-20 | Planned | 0 | — | $0 | |
| 2005-06-08 | Planned | 4 | 3 | $2,100 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within LA, ordered by federal enforcement volume:
- BELL MACHINE COMPANYSHREVEPORT — 2 federal enforcement records
- HOWELL INDUSTRIES, INC.SULPHUR — 2 federal enforcement records
- NATIONAL OILWELL VARCO INCAMELIA — 2 federal enforcement records
- BELL MACHINE COMPANYSHREVEPORT — 2 federal enforcement records
- FALK RENEW PRAGERNEW ORLEANS — 2 federal enforcement records
- ALLIANCE LASER, INC.SLIDELL — 2 federal enforcement records
- MACHINE TECH, INC.HOUMA — 2 federal enforcement records
- SOUTHERN VALVE SERVICE, INC.PRAIRIEVILLE — 2 federal enforcement records
- M. RODRIGUE & SON, INC.VACHERIE — 2 federal enforcement records
- FALK RENEW PRAGERSAINT ROSE — 2 federal enforcement records
Related searches
- Machine ShopsAll employers in this industry
- Employers in LAState-wide enforcement data
- Machine Shops in LAIndustry × state cross-filter
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →About this data
This profile aggregates federal enforcement records on GUICO MACHINE WORKS, INC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Frequently asked
- What is GUICO MACHINE WORKS, INC's OSHA violation history?
- GUICO MACHINE WORKS, INC has 3 OSHA inspections on record with 4 violations and $2,100 in total penalties.
- How does GUICO MACHINE WORKS, INC's safety record compare to its industry?
- GUICO MACHINE WORKS, INC operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7.