Skip to main content

Establishment profile

GREGORY MANUFACTURING CO INC DBA GREGORY DESIGN &

40 FRANKE BOULEVARD, FAYETTEVILLE, TN, 37334
332439Other Metal Container Manufacturing

Download as PDF →

OSHA inspections
2
over 13 years
Violations
22
$26,658 in penalties
SVEP
YES
Severe violator program
Accident investigations on record
1 National Emphasis Program inspections

Summary

GREGORY MANUFACTURING CO INC DBA GREGORY DESIGN & has accumulated 22 OSHA violations across 2 inspections over 13 years of recorded history, with $26,658 in total assessed penalties.

The establishment sits in the 68th percentile for violations within its industry-state peer group of 54 employers. Inspection frequency runs at the 34th percentile. The most recent enforcement activity was recorded 12 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

GREGORY MANUFACTURING CO INC DBA GREGORY DESIGN & appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
2
0.2 / yr · last 13 yrs
Violations
22
1.7 / yr
Penalties
$26,658
$1,212 avg / violation
50% serious50% other
Inspection trigger · complaint
1 of 2
Inspection trigger · referral
1 of 2

100% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 17 distinct standards shown · 22 citations in this view · $26,658 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0134 A0222$19,060Apr 2013Mar 2014
29 CFR 1000.702 D22Apr 2013Mar 2014
29 CFR 1000.702 B 122Apr 2013Mar 2014
29 CFR 1910.1200 H0122Apr 2013Mar 2014
29 CFR 9000.60222Apr 2013Mar 2014
29 CFR 1910.1026 D0111$3,060Apr 2013Apr 2013
29 CFR 1910.0134 E06 I11$2,800Mar 2014Mar 2014
29 CFR 3000.327 B 211$765Apr 2013Apr 2013
29 CFR 1910.1020 G01 I11$400Mar 2014Mar 2014
29 CFR 1910.0134 K0611$382Apr 2013Apr 2013
29 CFR 1910.0095 I0511$191Apr 2013Apr 2013
29 CFR 1910.0134 G01 III11Mar 2014Mar 2014
29 CFR 1910.1026 L01 III11Apr 2013Apr 2013
29 CFR 1910.1200 G0811Apr 2013Apr 2013
29 CFR 1910.0134 D01 III11Apr 2013Apr 2013
29 CFR 1910.0095 K0111Apr 2013Apr 2013
29 CFR 1910.0095 M02 IIE11Apr 2013Apr 2013

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

68th

Above average violations in NAICS 3324 within TN. Peer group: 54 employers. This establishment has 22 OSHA violations; peer median is 12.

Fewer violationsMore violations
Penalty percentile
94th
peer median: $2,850
Inspection frequency
34th
peer median: 2

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for GREGORY MANUFACTURING CO INC DBA GREGORY DESIGN &. Verify directly with OSHA Injury Tracking Application

Industry benchmark

Industry avg TRIR
5.0
BLS SOII 2024
Industry avg DART
2.6
BLS SOII 2024
Self-reported TRIR
Not in OSHA ITA

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Complaint
1
Referral
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for GREGORY MANUFACTURING CO INC DBA GREGORY DESIGN &. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
12 years ago

No federal enforcement activity has been recorded against this establishment in 12+ years. Most recent activity: 12 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for GREGORY MANUFACTURING CO INC DBA GREGORY DESIGN &. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for GREGORY MANUFACTURING CO INC DBA GREGORY DESIGN &. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for GREGORY MANUFACTURING CO INC DBA GREGORY DESIGN &. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for GREGORY MANUFACTURING CO INC DBA GREGORY DESIGN &. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for GREGORY MANUFACTURING CO INC DBA GREGORY DESIGN &. Verify directly with Environmental Protection Agency

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for GREGORY MANUFACTURING CO INC DBA GREGORY DESIGN &. Verify directly with UVA Corporate Prosecution Registry

Inspection history

DateTriggerViolationsSeriousPenalty
2013-12-17Complaint82$19,200
2012-12-10Referral149$7,458

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in other metal container manufacturing within TN, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on GREGORY MANUFACTURING CO INC DBA GREGORY DESIGN & from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is GREGORY MANUFACTURING CO INC DBA GREGORY DESIGN &'s OSHA violation history?
GREGORY MANUFACTURING CO INC DBA GREGORY DESIGN & has 2 OSHA inspections on record with 22 violations and $26,658 in total penalties.
How does GREGORY MANUFACTURING CO INC DBA GREGORY DESIGN &'s safety record compare to its industry?
GREGORY MANUFACTURING CO INC DBA GREGORY DESIGN & operates in the other metal container manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 5.