Establishment profile
GREATER MARYLAND TOOL & MFG. CORP.
5 RESOURCE AVE., MOUNTAIN LAKE PARK, MD, 21550
332710 — Machine Shops
Summary
GREATER MARYLAND TOOL & MFG. CORP. has accumulated 14 OSHA violations across 2 inspections over 14 years of recorded history, with $1,510 in total assessed penalties.
The establishment sits in the 47th percentile for violations within its industry-state peer group of 82 employers. Inspection frequency runs at the 49th percentile. The most recent enforcement activity was recorded 6 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
GREATER MARYLAND TOOL & MFG. CORP. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
50% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 14 distinct standards shown · 14 citations in this view · $1,510 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0303 B01 | 1 | 1 | $460 | May 2012 | May 2012 |
| 29 CFR 1910.0219 D01 | 1 | 1 | $460 | May 2012 | May 2012 |
| 29 CFR 1910.0147 C04 I | 1 | 1 | $385 | May 2012 | May 2012 |
| 29 CFR 1910.0215 A02 | 1 | 1 | $205 | May 2012 | May 2012 |
| 29 CFR 1910.0147 C07 I | 1 | 1 | — | May 2012 | May 2012 |
| 29 CFR 1910.0147 C07 IV | 1 | 1 | — | May 2012 | May 2012 |
| 29 CFR 1910.0215 B09 | 1 | 1 | — | May 2012 | May 2012 |
| 29 CFR 1910.1200 E01 | 1 | 1 | — | May 2012 | May 2012 |
| 29 CFR 5040.5 B01 | 1 | 1 | — | May 2012 | May 2012 |
| 29 CFR 1910.0022 D01 | 1 | 1 | — | May 2012 | May 2012 |
| 29 CFR 5040.6 A01 | 1 | 1 | — | May 2012 | May 2012 |
| 29 CFR 1910.0132 D02 | 1 | 1 | — | May 2012 | May 2012 |
| 29 CFR 1910.0147 C06 I | 1 | 1 | — | May 2012 | May 2012 |
| 29 CFR 1910.0147 C06 II | 1 | 1 | — | May 2012 | May 2012 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Below average violations in NAICS 3327 within MD. Peer group: 82 employers. This establishment has 14 OSHA violations; peer median is 14.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for GREATER MARYLAND TOOL & MFG. CORP.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for GREATER MARYLAND TOOL & MFG. CORP.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 6+ years. Most recent activity: 6 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for GREATER MARYLAND TOOL & MFG. CORP.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for GREATER MARYLAND TOOL & MFG. CORP.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for GREATER MARYLAND TOOL & MFG. CORP.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for GREATER MARYLAND TOOL & MFG. CORP.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for GREATER MARYLAND TOOL & MFG. CORP.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for GREATER MARYLAND TOOL & MFG. CORP.. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of DefenseFLANGE-RSTR, SL 2Scontract · Last action 2020-07-13$156,800
- Department of DefenseLIFTING ASSYcontract · Last action 2018-12-14$139,900
- Department of DefenseDRIVE SHAFT EXTEN.contract · Last action 2020-12-15$96,350
- Department of DefenseFLANGE-RSTR, SL 2Scontract · Last action 2025-07-08$89,700
- Department of DefenseLIFTING ASSYcontract · Last action 2023-07-27$86,500
- Department of DefenseFLANGE-RSTR, SL 2Scontract · Last action 2017-07-11$83,955
- Department of DefenseNAVY REQUIREMENTcontract · Last action 2013-04-26$76,000
- Department of DefenseNAVY REQUIREMENTcontract · Last action 2011-12-09$74,750
- Department of DefenseFLANGE-RSTR, SL 2Scontract · Last action 2022-05-27$73,225
- Department of DefenseFLANGE-RSTR, SL 2Scontract · Last action 2024-04-03$70,195
- Department of DefenseFLANGE-RSTR, SL 2Scontract · Last action 2020-01-10$65,405
- Department of DefenseTEST KITcontract · Last action 2023-07-12$62,100
- Department of DefenseNAVY REQUIREMENTcontract · Last action 2013-01-07$53,700
- Department of DefenseNUT, HEX SLFLKGcontract · Last action 2017-03-22$50,144
- Department of DefensePULLEY ASSEMBLY,SPEcontract · Last action 2025-04-09$50,000
- Department of DefenseELBOW 90Dcontract · Last action 2019-04-02$49,200
- Department of DefenseNAVY REQUIREMENTcontract · Last action 2012-08-28$48,750
- Department of DefenseNAVY REQUIREMENTcontract · Last action 2012-10-04$47,960
- Department of DefenseWRENCH,RATCHETcontract · Last action 2014-02-04$47,680
- Department of DefensePULLER,MECHANICALcontract · Last action 2023-01-12$45,250
- Department of DefenseFLANGE-RSTR, SL 2Scontract · Last action 2021-07-19$45,225
- Department of DefenseMEASURING TOOLcontract · Last action 2009-03-20$44,250
- Department of DefenseLOCKING DEVICE ASSYcontract · Last action 2016-03-22$41,340
- Department of DefenseRING,RETAININGcontract · Last action 2019-03-27$41,250
- Department of DefenseBOLT,MACHINEcontract · Last action 2018-08-29$41,070
- Department of DefenseSCREW,CAP,HEXAGON Hcontract · Last action 2020-11-23$40,804
- Department of DefenseSTEMcontract · Last action 2025-03-25$40,150
- Department of DefenseHANDWHEELcontract · Last action 2019-10-30$39,160
- Department of DefenseSHOULDER SCREWcontract · Last action 2018-12-12$37,854
- Department of DefenseWRENCH,TORQUEcontract · Last action 2022-08-23$36,765
- Department of DefenseNAVY REQUIREMENTcontract · Last action 2012-12-18$36,250
- Department of DefenseNUT,PLAIN,HEXAGONcontract · Last action 2021-05-04$35,840
- Department of DefensePLUG,MACHINE THREADcontract · Last action 2021-01-13$35,588
- Department of DefenseEXTRACTOR,STUFFINGcontract · Last action 2024-03-28$34,932
- Department of DefenseHOUSING,BEARING UNIcontract · Last action 2018-08-23$34,500
- Department of DefenseTOOL,VENT ADAPTERcontract · Last action 2024-03-21$34,000
- Department of DefenseWASHER, LOCKcontract · Last action 2023-05-11$33,750
- Department of DefenseELBOW,TUBEcontract · Last action 2015-05-05$33,300
- Department of DefensePLUG,MACHINE THREADcontract · Last action 2019-12-09$33,222
- Department of DefenseSCREW,CAP,SOCKET HEcontract · Last action 2026-01-08$33,159
- Department of DefenseNAVY REQTcontract · Last action 2010-07-01$31,800
- Department of DefenseNAVY RQMTcontract · Last action 2008-10-29$31,320
- Department of DefenseNAVY RQMTcontract · Last action 2010-01-26$31,250
- Department of DefenseNAVY REQUIREMENTcontract · Last action 2013-03-15$31,155
- Department of DefenseFLANGE-RSTR, SL 2Scontract · Last action 2023-02-17$31,000
- Department of DefensePULLER,MECHANICALcontract · Last action 2020-02-12$30,875
- Department of DefenseWASHER,KEYcontract · Last action 2021-06-01$30,651
- Department of DefenseNUT,PLAIN,HEXAGONcontract · Last action 2022-10-31$30,269
- Department of DefenseSCREW,EXTERNALLY REcontract · Last action 2020-02-07$29,401
- Department of DefenseCOLLAR,SHAFTcontract · Last action 2023-06-09$29,250
Federal contract dollars to this establishment. Primary NAICS: 332722 - BOLT, NUT, SCREW, RIVET, AND WASHER MANUFACTURING. Last action: 2026-01-23. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2020-01-15 | Planned | 0 | — | $0 | |
| 2012-03-21 | Planned | 14 | 7 | $1,510 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within MD, ordered by federal enforcement volume:
- COVINGTON MACHINE AND WELDING, INC.ANNAPOLIS — 2 federal enforcement records
- RAY MACHINE INC.BALTIMORE — 2 federal enforcement records
- CLARK MACHINE CORPORATIONROSEDALE — 2 federal enforcement records
- A.I.M., INC.PARKTON — 2 federal enforcement records
- SERVICE MACHINE SHOP, INC.NORTH BETHESDA — 2 federal enforcement records
- OBOYLE ENTERPRISES, INC. DBA CUSTOM MACHINEHAGERSTOWN — 1 federal enforcement record
- HOUSE OF BALANCE, INCELKRIDGE — 1 federal enforcement record
- MANUFACTURING SUPPORT INDUSTRIES INCHEBRON — 1 federal enforcement record
- SUMATECH, INC.WHITE MARSH — 1 federal enforcement record
- GENERAL MACHINE SHOP, INC.LANDOVER — 1 federal enforcement record
Related searches
- Machine ShopsAll employers in this industry
- Employers in MDState-wide enforcement data
- Machine Shops in MDIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on GREATER MARYLAND TOOL & MFG. CORP. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is GREATER MARYLAND TOOL & MFG. CORP.'s OSHA violation history?
- GREATER MARYLAND TOOL & MFG. CORP. has 2 OSHA inspections on record with 14 violations and $1,510 in total penalties.
- How does GREATER MARYLAND TOOL & MFG. CORP.'s safety record compare to its industry?
- GREATER MARYLAND TOOL & MFG. CORP. operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7.