Establishment profile
GIDDINGS & LEWIS MACHINE TOOL COMPANY
142 DOTY ST., FOND DU LAC, WI, 54935
Summary
GIDDINGS & LEWIS MACHINE TOOL COMPANY has accumulated 22 OSHA violations across 5 inspections over 46 years of recorded history, with $1,960 in total assessed penalties.
The establishment sits in the 94th percentile for violations within its industry-state peer group of 111 employers. Inspection frequency runs at the 94th percentile. The most recent enforcement activity was recorded 29 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
GIDDINGS & LEWIS MACHINE TOOL COMPANY appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
60% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 20 citations in this view · $1,960 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0179 J02 III | 1 | 1 | $560 | Sep 1989 | Sep 1989 |
| 29 CFR 1910.1000 C | 1 | 1 | $350 | Sep 1989 | Sep 1989 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $350 | Sep 1989 | Sep 1989 |
| 29 CFR 1910.0106 E02 IVD | 1 | 1 | $280 | Sep 1989 | Sep 1989 |
| 29 CFR 1910.0106 E02 IVA | 1 | 1 | $210 | Sep 1989 | Sep 1989 |
| 29 CFR 1910.1200 F04 I | 1 | 1 | $210 | Sep 1989 | Sep 1989 |
| 29 CFR 1910.0107 F07 | 1 | 1 | — | Feb 1995 | Feb 1995 |
| 29 CFR 1910.0095 G06 | 1 | 1 | — | Sep 1989 | Sep 1989 |
| 29 CFR 1910.0095 K01 | 1 | 1 | — | Sep 1989 | Sep 1989 |
| 29 CFR 1910.0106 E06 II | 1 | 1 | — | Sep 1989 | Sep 1989 |
| 29 CFR 1910.0179 J02 IV | 1 | 1 | — | Sep 1989 | Sep 1989 |
| 29 CFR 1910.0179 M01 | 1 | 1 | — | Sep 1989 | Sep 1989 |
| 29 CFR 1910.0242 B | 1 | 1 | — | Sep 1989 | Sep 1989 |
| 29 CFR 1910.1000 E | 1 | 1 | — | Sep 1989 | Sep 1989 |
| 29 CFR 1910.1200 F04 II | 1 | 1 | — | Sep 1989 | Sep 1989 |
| 29 CFR 1910.0134 B03 | 1 | 1 | — | Mar 1980 | Mar 1980 |
| 29 CFR 1910.0134 B05 | 1 | 1 | — | Mar 1980 | Mar 1980 |
| 29 CFR 1910.0134 B07 | 1 | 1 | — | Mar 1980 | Mar 1980 |
| 29 CFR 1910.0134 E05 | 1 | 1 | — | Mar 1980 | Mar 1980 |
| 29 CFR 1910.0134 E05 I | 1 | 1 | — | Mar 1980 | Mar 1980 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3335 within WI. Peer group: 111 employers. This establishment has 22 OSHA violations; peer median is 5.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for GIDDINGS & LEWIS MACHINE TOOL COMPANY. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for GIDDINGS & LEWIS MACHINE TOOL COMPANY. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 29+ years. Most recent activity: 29 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for GIDDINGS & LEWIS MACHINE TOOL COMPANY. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for GIDDINGS & LEWIS MACHINE TOOL COMPANY. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for GIDDINGS & LEWIS MACHINE TOOL COMPANY. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for GIDDINGS & LEWIS MACHINE TOOL COMPANY. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for GIDDINGS & LEWIS MACHINE TOOL COMPANY. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for GIDDINGS & LEWIS MACHINE TOOL COMPANY. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 1997-06-09 | Referral | 0 | — | $0 | |
| 1995-01-30 | Complaint | 1 | — | $0 | |
| 1989-07-20 | Complaint | 14 | 11 | $1,960 | |
| 1983-10-25 | Planned | 0 | — | $0 | |
| 1980-03-06 | Complaint | 7 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in this industry within WI, ordered by federal enforcement volume:
- A-1 MACHINE, INC.FREDERIC — 1 federal enforcement record
- WISCONSIN MACHINE TOOL CORPORATIONBROOKFIELD — 1 federal enforcement record
- S & M MACHINE SERVICES INCOCONTO FALLS — 1 federal enforcement record
- ELLIS MANUFACTURING COMPANY, INC.VERONA — 1 federal enforcement record
- INTERTECH CORPORATIONRACINE — 0 federal enforcement records
Related searches
- NAICS 333All employers in this industry
- Employers in WIState-wide enforcement data
- Industry in WIIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on GIDDINGS & LEWIS MACHINE TOOL COMPANY from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is GIDDINGS & LEWIS MACHINE TOOL COMPANY's OSHA violation history?
- GIDDINGS & LEWIS MACHINE TOOL COMPANY has 5 OSHA inspections on record with 22 violations and $1,960 in total penalties.